The FreeBSD Ports Archive

Freebsd | Contact
Welcome to FreeBSD Software


FreeBSD devel : libccid

Generic USB CCID (Chip/Smart Card Interface Devices) driver

 Generic USB CCID (Chip/Smart Card Interface Devices) driver.

Author:	Ludovic Rousseau
 

http://pcsclite.alioth.debian.org/ccid.html



libccid history


v. 1.12
date: 2007/12/12 13:16:49;  author: arved;  state: Exp;  lines: +2 -2
Update to 1.3.1

v. 1.11 date: 2007/07/23 09:35:41; author: rafan; state: Exp; lines: +1 -1 - Set --mandir and --infodir in CONFIGURE_ARGS if the configure script supports them. This is determined by running ``configure --help'' in do-configure target and set the shell variable _LATE_CONFIGURE_ARGS which is then passed to CONFIGURE_ARGS. - Remove --mandir and --infodir in ports' Makefile where applicable Few ports use REINPLACE_CMD to achieve the same effect, remove them too. - Correct some manual pages location from PREFIX/man to MANPREFIX/man - Define INFO_PATH where necessary - Document that .info files are installed in a subdirectory relative to PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and subdirectory detection. PR: ports/111470 Approved by: portmgr Discussed with: stas (Mk/*), gerald (info related stuffs) Tested by: pointyhat exp run
v. 1.10 date: 2007/06/13 20:06:59; author: arved; state: Exp; lines: +6 -3 Update to 1.3.0
v. 1.9 date: 2007/02/21 15:27:21; author: arved; state: Exp; lines: +2 -2 Update to 1.2.1
v. 1.8 date: 2007/01/22 16:58:22; author: arved; state: Exp; lines: +3 -3 Update to 1.2.0
v. 1.7 date: 2006/11/04 18:15:58; author: arved; state: Exp; lines: +1 -1 Make fetchable PR: 105069 Submitted by: Thomas Abthorpe
v. 1.6 date: 2006/09/20 20:05:58; author: arved; state: Exp; lines: +8 -1 Fix the creation of the Info.plist file on RELENG_4 with perl < 5.6 Bump PORTREVISION Reported by: "Jack Weimer"
v. 1.5 date: 2006/08/24 12:38:58; author: arved; state: Exp; lines: +4 -2 Update to 1.1.0
v. 1.4 date: 2006/07/02 15:08:18; author: arved; state: Exp; lines: +2 -2 Update pcsc-lite to 1.3.1 and libccid to 1.0.1
v. 1.3 date: 2006/04/07 19:05:24; author: arved; state: Exp; lines: +7 -13 Update to 1.0.0
v. 1.2 date: 2006/01/02 13:49:29; author: arved; state: Exp; lines: +3 -3 Update to 0.9.4
v. 1.1 date: 2005/04/20 13:33:39; author: arved; state: Exp; Add libccid, a USB CCID (Chip/Smart Card Interface Device) driver. This was tested with a Gemplus GemPC Twin and an SCM Micro SPR 532 ============================================================================= v. 1.12 date: 2007/12/12 13:16:49; author: arved; state: Exp; lines: +2 -2 Update to 1.3.1
v. 1.11 date: 2007/07/23 09:35:41; author: rafan; state: Exp; lines: +1 -1 - Set --mandir and --infodir in CONFIGURE_ARGS if the configure script supports them. This is determined by running ``configure --help'' in do-configure target and set the shell variable _LATE_CONFIGURE_ARGS which is then passed to CONFIGURE_ARGS. - Remove --mandir and --infodir in ports' Makefile where applicable Few ports use REINPLACE_CMD to achieve the same effect, remove them too. - Correct some manual pages location from PREFIX/man to MANPREFIX/man - Define INFO_PATH where necessary - Document that .info files are installed in a subdirectory relative to PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and subdirectory detection. PR: ports/111470 Approved by: portmgr Discussed with: stas (Mk/*), gerald (info related stuffs) Tested by: pointyhat exp run
v. 1.10 date: 2007/06/13 20:06:59; author: arved; state: Exp; lines: +6 -3 Update to 1.3.0
v. 1.9 date: 2007/02/21 15:27:21; author: arved; state: Exp; lines: +2 -2 Update to 1.2.1
v. 1.8 date: 2007/01/22 16:58:22; author: arved; state: Exp; lines: +3 -3 Update to 1.2.0
v. 1.7 date: 2006/11/04 18:15:58; author: arved; state: Exp; lines: +1 -1 Make fetchable PR: 105069 Submitted by: Thomas Abthorpe
v. 1.6 date: 2006/09/20 20:05:58; author: arved; state: Exp; lines: +8 -1 Fix the creation of the Info.plist file on RELENG_4 with perl < 5.6 Bump PORTREVISION Reported by: "Jack Weimer"
v. 1.5 date: 2006/08/24 12:38:58; author: arved; state: Exp; lines: +4 -2 Update to 1.1.0
v. 1.4 date: 2006/07/02 15:08:18; author: arved; state: Exp; lines: +2 -2 Update pcsc-lite to 1.3.1 and libccid to 1.0.1
v. 1.3 date: 2006/04/07 19:05:24; author: arved; state: Exp; lines: +7 -13 Update to 1.0.0
v. 1.2 date: 2006/01/02 13:49:29; author: arved; state: Exp; lines: +3 -3 Update to 0.9.4
v. 1.1 date: 2005/04/20 13:33:39; author: arved; state: Exp; Add libccid, a USB CCID (Chip/Smart Card Interface Device) driver. This was tested with a Gemplus GemPC Twin and an SCM Micro SPR 532 =============================================================================



Main menu

FreeBSD

Program categories

Freebsd accessibility
Freebsd archivers
Freebsd astro
Freebsd audio
Freebsd benchmarks
Freebsd biology
Freebsd cad
Freebsd chinese
Freebsd comms
Freebsd converters
Freebsd databases
Freebsd deskutils
Freebsd devel
Freebsd dns
Freebsd editors
Freebsd emulators
Freebsd finance
Freebsd french
Freebsd ftp
Freebsd games
Freebsd german
Freebsd graphics
Freebsd hebrew
Freebsd hungarian
Freebsd irc
Freebsd japanese
Freebsd java
Freebsd korean
Freebsd lang
Freebsd mail
Freebsd math
Freebsd mbone
Freebsd misc
Freebsd multimedia
Freebsd net
Freebsd net-im
Freebsd net-mgmt
Freebsd net-p2p
Freebsd news
Freebsd palm
Freebsd polish
Freebsd ports-mgmt
Freebsd portuguese
Freebsd print
Freebsd russian
Freebsd science
Freebsd security
Freebsd shells
Freebsd sysutils
Freebsd textproc
Freebsd ukrainian
Freebsd vietnamese
Freebsd www
Freebsd x11
Freebsd x11-clocks
Freebsd x11-drivers
Freebsd x11-fm
Freebsd x11-fonts
Freebsd x11-servers
Freebsd x11-themes
Freebsd x11-toolkits
Freebsd x11-wm