The FreeBSD Ports Archive

FreeBSD cad : alliance

A complete set of CAD tools and libraries for VLSI design

 Alliance is a complete set of free CAD tools and portable libraries
for VLSI design. It includes a VHDL compiler and simulator, logic
synthesis tools, and automatic place and route tools.  A complete set
of portable CMOS libraries is provided.  Alliance is the result of a
twelve year effort spent at ASIM department of LIP6 laboratory of
the Pierre et Marie Curie University (Paris VI, France). 

alliance history

v. 1.13
date: 2007/10/28 02:51:37;  author: hrs;  state: Exp;  lines: +2 -7
Update to 5.0.20070718.

v. 1.12
date: 2007/10/17 10:12:25;  author: ade;  state: Exp;  lines: +2 -2
Migration from bison 1.x to 2.x

PR:		117086
Tested by:	-exp runs

v. 1.11
date: 2007/07/23 09:35:33;  author: rafan;  state: Exp;  lines: +1 -1
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:		ports/111470
Approved by:	portmgr
Discussed with:	stas (Mk/*), gerald (info related stuffs)
Tested by:	pointyhat exp run

v. 1.10
date: 2007/05/26 20:21:20;  author: kris;  state: Exp;  lines: +4 -0
BROKEN with gcc 4.2

v. 1.9
date: 2007/05/19 20:00:28;  author: flz;  state: Exp;  lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

v. 1.8
date: 2007/01/02 22:46:37;  author: hrs;  state: Exp;  lines: +2 -2
Update to 5.0.20060509.

v. 1.7
date: 2006/07/25 17:15:31;  author: hrs;  state: Exp;  lines: +3 -0
Add NOT_FOR_ARCHS=sparc64 line because of build problems on sparc64.

Spotted by:	linimon

v. 1.6
date: 2006/06/13 14:27:03;  author: hrs;  state: Exp;  lines: +2 -5
- Fix an invalid knob (s/USE_X/USE_XLIB/)[1].
- Use SUB_FILES.

Spotted by:	erwin[1]

v. 1.5
date: 2006/05/03 23:38:26;  author: edwin;  state: Exp;  lines: +0 -1
remove USE_REINPLACE for all ports with categories starting with C

v. 1.4
date: 2005/09/10 22:04:52;  author: hrs;  state: Exp;  lines: +100 -108
Update to 5.0.20050217 and unbreak the build on FreeBSD 5.x
and later.

PR:		ports/84715
Submitted by:	Carlos A M dos Santos (casantos at gama-rt dot urisan dot tche dot br)

v. 1.3
date: 2004/09/17 22:40:40;  author: kris;  state: Exp;  lines: +4 -0
BROKEN on 5.x: Does not compile

Approved by:    portmgr (self)

v. 1.2
date: 2004/05/17 21:31:49;  author: hrs;  state: Exp;  lines: +4 -1
- Add MASTER_SITE_LOCAL to MASTER_SITES to improve availability.
- Add USE_BISON=yes to unbreak the build.

Pointed out by:	kris
Approved by:	linimon (mentor)

v. 1.1
date: 2004/05/13 18:51:03;  author: hrs;  state: Exp;
Add cad/alliance, which is a complete set of free CAD tools and
portable libraries for VLSI design.  It includes a VHDL compiler
and simulator, logic synthesis tools, automatic place and route
tools, and portable CMOS libraries.

Approved by:	linimon (mentor)
=============================================================================