FreeBSD x11  : ggiterm
A terminal emulator for GGI
GGIterm is an ANSI-compatible terminal emulator (like xterm, rxvt,
gnome-terminal, konsole, etc.), but directed at LibGGI rather than
X11. This means that, unlike most terminal emulators, it can run on a
KGGI, SVGAlib, or other non-X target just as well as under X11.
GGIterm uses freetype (by default) to render fonts, which means that
you can use TT, Type 1, etc. fonts on your terminal.
At present, it's not complete--you probably don't want to replace
gnome-terminal or konsole yet under X, and it's only barely been
tested on other targets. But it works.
http://ggiterm.sourceforge.net/
|
ggiterm history
v. 1.9
date: 2007/05/19 20:26:23; author: flz; state: Exp; lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.8
date: 2005/11/19 19:48:05; author: sem; state: Exp; lines: +4 -2
- Add SHA256
ggiterm port:
- Don't use gmake
- Install ggitem.termcap and add message about it
- Utilize DATADIR
- Bump PORTREVISION
PR: ports/89280
Submitted by: Antoine Brodin (maintainer)
v. 1.7
date: 2005/07/13 14:28:08; author: pav; state: Exp; lines: +3 -8
- Update to 0.7.1
- Take maintainership
PR: ports/83190
Submitted by: Antoine Brodin
v. 1.6
date: 2004/12/10 08:37:50; author: pav; state: Exp; lines: +1 -1
- Augment configure patching
Submitted by: Antoine Brodin
Pointy hat to: pav
v. 1.5
date: 2004/12/09 09:49:38; author: pav; state: Exp; lines: +10 -3
- Update to 0.7.0
PR: ports/74746
Submitted by: Antoine Brodin
v. 1.4
date: 2004/08/20 22:54:45; author: pav; state: Exp; lines: +8 -20
- Convert to OPTIONS
PR: ports/70728
Submitted by: Ying-Chieh Chen
v. 1.3
date: 2004/03/30 19:56:43; author: krion; state: Exp; lines: +1 -1
- Use USE_ICONV knob
Approved by: portmgr
v. 1.2
date: 2004/02/04 05:09:40; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.1
date: 2003/12/09 00:05:55; author: pav; state: Exp;
Add ggiterm, a GGI-based ANSI terminal emulator, but it runs on any GGI target
- X, SVGAlib, etc. It uses Freetype (by default) for fonts.
PR: ports/58342
Submitted by: andi payn
=============================================================================
v. 1.9
date: 2007/05/19 20:26:23; author: flz; state: Exp; lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.8
date: 2005/11/19 19:48:05; author: sem; state: Exp; lines: +4 -2
- Add SHA256
ggiterm port:
- Don't use gmake
- Install ggitem.termcap and add message about it
- Utilize DATADIR
- Bump PORTREVISION
PR: ports/89280
Submitted by: Antoine Brodin (maintainer)
v. 1.7
date: 2005/07/13 14:28:08; author: pav; state: Exp; lines: +3 -8
- Update to 0.7.1
- Take maintainership
PR: ports/83190
Submitted by: Antoine Brodin
v. 1.6
date: 2004/12/10 08:37:50; author: pav; state: Exp; lines: +1 -1
- Augment configure patching
Submitted by: Antoine Brodin
Pointy hat to: pav
v. 1.5
date: 2004/12/09 09:49:38; author: pav; state: Exp; lines: +10 -3
- Update to 0.7.0
PR: ports/74746
Submitted by: Antoine Brodin
v. 1.4
date: 2004/08/20 22:54:45; author: pav; state: Exp; lines: +8 -20
- Convert to OPTIONS
PR: ports/70728
Submitted by: Ying-Chieh Chen
v. 1.3
date: 2004/03/30 19:56:43; author: krion; state: Exp; lines: +1 -1
- Use USE_ICONV knob
Approved by: portmgr
v. 1.2
date: 2004/02/04 05:09:40; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.1
date: 2003/12/09 00:05:55; author: pav; state: Exp;
Add ggiterm, a GGI-based ANSI terminal emulator, but it runs on any GGI target
- X, SVGAlib, etc. It uses Freetype (by default) for fonts.
PR: ports/58342
Submitted by: andi payn
=============================================================================
v. 1.9
date: 2007/05/19 20:26:23; author: flz; state: Exp; lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.8
date: 2005/11/19 19:48:05; author: sem; state: Exp; lines: +4 -2
- Add SHA256
ggiterm port:
- Don't use gmake
- Install ggitem.termcap and add message about it
- Utilize DATADIR
- Bump PORTREVISION
PR: ports/89280
Submitted by: Antoine Brodin (maintainer)
v. 1.7
date: 2005/07/13 14:28:08; author: pav; state: Exp; lines: +3 -8
- Update to 0.7.1
- Take maintainership
PR: ports/83190
Submitted by: Antoine Brodin
v. 1.6
date: 2004/12/10 08:37:50; author: pav; state: Exp; lines: +1 -1
- Augment configure patching
Submitted by: Antoine Brodin
Pointy hat to: pav
v. 1.5
date: 2004/12/09 09:49:38; author: pav; state: Exp; lines: +10 -3
- Update to 0.7.0
PR: ports/74746
Submitted by: Antoine Brodin
v. 1.4
date: 2004/08/20 22:54:45; author: pav; state: Exp; lines: +8 -20
- Convert to OPTIONS
PR: ports/70728
Submitted by: Ying-Chieh Chen
v. 1.3
date: 2004/03/30 19:56:43; author: krion; state: Exp; lines: +1 -1
- Use USE_ICONV knob
Approved by: portmgr
v. 1.2
date: 2004/02/04 05:09:40; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.1
date: 2003/12/09 00:05:55; author: pav; state: Exp;
Add ggiterm, a GGI-based ANSI terminal emulator, but it runs on any GGI target
- X, SVGAlib, etc. It uses Freetype (by default) for fonts.
PR: ports/58342
Submitted by: andi payn
=============================================================================
|
