The FreeBSD Ports Archive

Freebsd | Contact
Welcome to FreeBSD Software


FreeBSD x11 : XFree86-4-clients

XFree86-4 client programs and related files

 This package contains XFree86-4 Client Environments.
xterm, ico, twm, oclock and other client programs are
included this package. Also library files and resource
files are included. 

http://www.xfree86.org/



XFree86-4-clients history


v. 1.142
date: 2007/09/13 19:44:56;  author: flz;  state: Exp;  lines: +3 -0
- Update X.org ports to 7.3.
- Mark XFree86-4 as DEPRECATED with EXPIRATION_DATE set to 2007-12-25.
I hope that nobody will be bored enough on Christmas to remove them on
that day.

Tested by:	vehemens, Rene Ladan, Beech Rintoul, sarek on x11@

v. 1.141 date: 2007/05/19 20:25:47; author: flz; state: Exp; lines: +1 -1 - Welcome X.org 7.2 \o/. - Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}. - Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.140 date: 2006/10/18 18:07:21; author: marcus; state: Exp; lines: +1 -0 Actually commit the Makefile bit to allow the patch-programs::fonttosfnt::util.c to apply. Reminded by: Scott Allendorf Approved by: portmgr (implicit)
v. 1.139 date: 2006/03/30 09:00:25; author: lesi; state: Exp; lines: +1 -1 Since fontconfig by default generates font cache file in directory where this port installs charmaps, try to remove it upon uninstallation, so removing of directory has a chance to succeed. Just in case some user has for some reason put fonts in here, be nice and try to regenerate cache file and remove it again only if it is empty. Pointed out by: pointyhat via kris
v. 1.138 date: 2006/01/30 23:20:05; author: kuriyama; state: Exp; lines: +2 -2 Chase shlib bump of libexpat.
v. 1.137 date: 2005/11/13 21:05:05; author: lesi; state: Exp; lines: +23 -10 Abandon installing xterm as xterm-static. There are checks in XFree-4-clients and xorg-clients that conditionally create symlinks to xterm-static if there is no xterm present so chances of loosing ability to run xterm after upgrade should be minimized. These checks shall go away in due time. Discussed with: krion
v. 1.136 date: 2005/11/11 22:16:11; author: lesi; state: Exp; lines: +3 -1 If port belongs to X11 distribution different than ${X_WINDOW_SYSTEM} one, point to The X Window System and Virtual Consoles chapter of FAQ. Add SHA256.
v. 1.135 date: 2005/06/15 02:39:58; author: lesi; state: Exp; lines: +7 -13 Upgrade to XFree86 4.5.0. Ports changes: - Drop dependency on x11/wrapper. X server already contains this code (programs/Xserver/os/utils.c rev. 3.58). - Install default SecurityPolicy with XFree86-4-libraries, thus avoiding plists and who-owns-what complications between different fooServer ports. Copy default file to real one if that doesn't exist and remove both upon uninstall if they are the same. - Revert change to Imake.rules rev. 3.132 in devel/imake-4 port, since couple of ports break with this change (devel/imake-4/files/patch-Imake.rules) - Add grehans patches for PPC [1] - Several of directories that were previously in /etc/mtree/BSD.x11-4.dist were moved to respective ports pkg-plists PR: [1] 78345, 78346, 78348, 78352, 78353, 78354, 78355, 78356
v. 1.134 date: 2005/02/14 19:40:04; author: lesi; state: Exp; lines: +1 -1 Fix plist. Reported by: pointyhat via kris
v. 1.133 date: 2005/01/30 19:38:22; author: lesi; state: Exp; lines: +2 -1 Clarify message about how to install luit setuid a bit. Noticed by: Rostislav Krasny (rosti_bsd at yahoo.com)
v. 1.132 date: 2005/01/14 23:42:45; author: lesi; state: Exp; lines: +1 -1 Properly fix the termios race rather than disabling copyTermios. PR: ports/74981 Submitted by: Rong-En Fan, rafan at infor dotorg Obtained from: XFree86 Bugzilla #867
v. 1.131 date: 2004/12/23 05:31:03; author: lesi; state: Exp; lines: +1 -1 Bump PORTREVISION, since html manpages are no longer built/installed and that changes packaging content.
v. 1.130 date: 2004/11/05 02:47:23; author: lesi; state: Exp; lines: +1 -1 Bump PORTREVISION for previous change, since it changes package contents. Reminded by: anholt
v. 1.129 date: 2004/10/29 03:24:48; author: lesi; state: Exp; lines: +5 -3 Install Faroese (fo) keyboard layout. Pet portlint while here. Reported by: ice (ice2000 at post olivant fo)
v. 1.128 date: 2004/08/23 11:02:09; author: lesi; state: Exp; lines: +14 -5 Instead of installing xterm here, depend on x11/xterm port. Taken from xorg-clients port. Suggested by: krion Approved by: anholt (mentor)
v. 1.127 date: 2004/08/10 01:29:15; author: marcus; state: Exp; lines: +14 -8 Update XFree86 clients to 4.4 release. Release notes are available at http://www.xfree86.org/4.4.0/RELNOTES.html PR: ports/67733 imake ports/67508 libraries ports/67510 clients ports/67513 server ports/67776 100dpi fonts ports/67777 75dpi fonts ports/67778 cyrillic fonts ports/67779 default bitmap fonts ports/67781 font encodings ports/67783 scalable fonts ports/67784 font server ports/67785 XFree86 meta-port ports/67775 documents ports/67786 manpages ports/67787 nest server ports/67788 print server ports/67789 virtual framebuffer server ports/56487 (Upgrading Xfree86-clients from ports overwrites xdm config files) ports/44252 (XFree86-4-Server port removes/overwrites config files) Submitted by: Dejan Lesjak (dejan DOT lesjak AT ijs DOT si) Additional changes by: anholt Jung-uk Kim (jkim AT niksun DOT com) arved Tested by: pointyhat linimon
v. 1.126 date: 2004/07/23 19:10:18; author: anholt; state: Exp; lines: +6 -0 - Add the X_WINDOW_SYSTEM={xorg,xfree86-4,xfree86-3} variable to bsd.port.mk, and make XFREE86_VERSION map to it. XFREE86_VERSION is now deprecated. - Make xorg the default X_WINDOW_SYSTEM on -current. - Add several new X_*_PORT variables which point to various pieces of X11 based on the setting of X_WINDOW_SYSTEM, and make ports use them. - Add information to CHANGES about how to handle the transition. PR: ports/68763 Approved by: portmgr (marcus) Approved by: re (scottl)
v. 1.125 date: 2004/05/31 06:15:41; author: anholt; state: Exp; lines: +2 -0 Register CONFLICTS on xorg-clients.
v. 1.124 date: 2004/05/29 20:51:16; author: anholt; state: Exp; lines: +1 -1 Link programs that link against Xfont against freetype. This will be required with newer libXfont that uses freetype, but causes no harm in the meantime.
v. 1.123 date: 2004/03/18 02:58:52; author: des; state: Exp; lines: +2 -1 Add dependency on expat2.
v. 1.122 date: 2004/03/17 07:04:14; author: lofi; state: Exp; lines: +1 -1 Fix build with freetype2-2.1.7.
v. 1.121 date: 2004/03/16 22:54:03; author: marcus; state: Exp; lines: +1 -1 Chase the new location of libXft.
v. 1.120 date: 2004/01/03 21:35:04; author: kan; state: Exp; lines: +2 -1 Merge a fix/workaround for changed 'cpp -traditional' behaviour from XFree86 4.3.99.
v. 1.119 date: 2003/12/12 23:19:06; author: anholt; state: Exp; lines: +4 -0 Bah. Some of the servers don't have the fonts/util/, causing failure due to patches being shared by all the ports. So, add them to clients only and use EXTRA_PATCHES. This should be done to more patches from XFree86-4-libraries.
v. 1.118 date: 2003/12/12 22:55:31; author: anholt; state: Exp; lines: +1 -1 Use #!/usr/bin/env perl instead of #!/usr/bin/perl to increase the chances of success.
v. 1.117 date: 2003/11/12 01:02:18; author: anholt; state: Exp; lines: +1 -1 Switch MAINTAINER to x11@FreeBSD.org for group maintaining of these ports.
v. 1.116 date: 2003/11/11 04:09:42; author: anholt; state: Exp; lines: +1 -1 Disable the patch from XFree86 bug 641 to copy the terminal's settings in luit to its new pty. This code doesn't work for some reason and produces "Couldn't copy terminal settings" when luit is run manually or the symptom of an xterm -lc flashing on screen and exiting. Submitted by: Guido Berhoerster
v. 1.115 date: 2003/11/09 04:44:30; author: anholt; state: Exp; lines: +14 -2 Update luit (helper app that does locale translation for xterm) in XFree86-4-clients from XFree86 CVS. This allows luit to be used setuid, which closes a security hole (tty left world-writable) that luit complains about on startup if not setuid. Setting WITH_SETUID_LUIT installs luit setuid. PR: ports/51632 Submitted by: Guido Berhoerster Help from: ITO Tsuyoshi
v. 1.114 date: 2003/08/12 18:35:36; author: anholt; state: Exp; lines: +1 -1 [1] Fix xdmcp queries in the X servers (bug 277) [2] Fix underlining in the freetype backend (bug 330) PR: [1] ports/52387 [2] ports/55134 Submitted by: [1] Joel Ray Holveck [2] Ariff Abdullah
v. 1.113 date: 2003/05/14 07:02:06; author: anholt; state: Exp; lines: +3 -10 [1] Make the HTML manpages get put into the packages again. [2] Check that XFREE86_VERSION=4 is set when building, rather than setting it. [3] Move many common Makefile bits to XFree86-4-libraries/Makefile.inc [4] Make the XFree86-4-Server port not install libXfont.so. [5] Move the xcursor.pc file to its proper location in ${X11BASE}/libdata/pkgconfig [6] Don't explicitly link libGL.so against libc, for the sake of 4.x's pthreads. Submitted by: [5,6] Ports Fury
v. 1.112 date: 2003/03/15 04:30:03; author: anholt; state: Exp; lines: +1 -0 Re-add patch-xdm_session.c which was accidentally dropped in the 4.3.0 upgrade. This fixes problems with environment not being set in xdm sessions. Submitted by: many Approved by: portmgr (kris)
v. 1.111 date: 2003/03/11 23:38:06; author: anholt; state: Exp; lines: +9 -27 Update XFree86 ports, including linux_dri, to 4.3.0. Set IGNORE= in dri-devel for being outdated. Thank you to all the testers and people who submitted patches for this update. Approved by: portmgr
v. 1.110 date: 2003/03/07 06:36:08; author: ade; state: Exp; lines: +1 -0 Clear moonlight beckons. Requiem mors pacem pkg-comment, And be calm ports tree. E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.109 date: 2003/02/19 08:06:54; author: anholt; state: Exp; lines: +1 -1 Fix XFree86-4-libraries after Xft renaming removal: Add `pkg-config xft --cflags` and --libs to Imakefiles of programs that use Xft and remove a bit of code not needed for Xft2, remove xftcache program. Reported by: many
v. 1.108 date: 2003/02/18 04:51:28; author: anholt; state: Exp; lines: +2 -1 Remove the renaming of Xft headers and library from the Xft (Xft2) port. Remove installing of Xft1 from XFree86-4-libraries, and add dependencies to the Xft port by all the ports that use it along with whatever patches are necessary. Approved by: portmgr (kris), marcus
v. 1.107 date: 2002/10/18 00:21:42; author: anholt; state: Exp; lines: +3 -3 Fix distfiles after the last commit (bad copy'n'pasting). PR: 44184
v. 1.106 date: 2002/10/17 07:19:50; author: anholt; state: Exp; lines: +11 -14 [1] Make the 4.2.1 ports all use the merged 4.2.1+mitshm patch. [2] Make the ports respect CFLAGS better. Now CFLAGS (and CC/CXX) are set for the build during the configure stage. PR: [2] 40271, 43369
v. 1.105 date: 2002/09/18 04:22:29; author: anholt; state: Exp; lines: +7 -12 Update XFree86-4-* ports which share XFree86-4-libraries's patches: - Reduce build times by not rebuilding some programs/libraries in each port. - Move some files from -clients to -libraries and from -libraries to -server. - Make package-building in XFree86-4 more intuitive PR: 41606 (package building)
v. 1.104 date: 2002/09/05 03:48:11; author: anholt; state: Exp; lines: +14 -8 Update XFree86-4-clients, -Servers, and -libraries to 4.2.1. The most notable update is fixing what appears to be possible privelege escalation with libX11 and setuid clients (xterm is one).
v. 1.103 date: 2002/08/21 21:58:44; author: anholt; state: Exp; lines: +1 -1 Fix the us_intl keymap. Submitted by: Mario Sergio Fujikawa Ferreira Obtained from: Andoni Zubimendi
v. 1.102 date: 2002/08/21 05:09:01; author: anholt; state: Exp; lines: +4 -1 Add LIB_DEPENDS for freetype and libGLU, both of which are required to compile. XFree86-4-libraries (for GLU) is already depended on, but people upgrading from older X could miss the dependency.
v. 1.101 date: 2002/08/05 07:26:01; author: anholt; state: Exp; lines: +1 -1 1. Use XlcDL.c from X CVS to help people with Korean or Japanese XIM and GTK+ 2. Update PCI IDs and nv driver to include newer nv chipsets 3. Add SHM to XFree86's libc wrapper on bsd to help with nv binary drivers. 4. Fix mouse scrollwheels on -current (new gcc) Submitted by: [1] Hye-Shik Chang [2] Chris Dillon [3] Matthew N. Dodd [4] Ted Lindgreen Approved by: mdodd
v. 1.100 date: 2002/08/02 02:57:04; author: anholt; state: Exp; lines: +9 -9 gzip Wraphelp.c and put it in local_distfiles, to help users having troubles downloading it. Move freebsd-glide3headers there too. Update BUILD_DEPENDS for font ports to catch new requirements as of 4.2.0. PR: 40362, 40759 Approved by: des (mentor)
v. 1.99 date: 2002/07/18 20:29:46; author: anholt; state: Exp; lines: +1 -3 Make XFree86-4 miniports use imake-4's HasXdmAuth setting (default is YES). Clean up Wraphelp.c inclusion in the ports that need it. Add USE_PERL5 to imake-4. Approved by: des
v. 1.98 date: 2002/07/14 20:26:02; author: anholt; state: Exp; lines: +2 -1 Take over maintainership of XFree86-4 ports. Add patches to fix libGLU on -current, fix the DRI with Wine, update the config files for the X ports, and fix many of them to allow continuing of the X build after interruption (it used to clean and rebuild). Approved by: will, des (mentor)
v. 1.97 date: 2002/03/20 00:18:36; author: will; state: Exp; lines: +1 -1 Add fix for XDM: Use SU="su -m" instead of SU="su", otherwise given the default setup for the "nobody" account, login will fail. PORTREVISION bumped to include this fix for XFree86-4-clients. PR: 36084 Submitted by: Stefan `Sec` Zehl
v. 1.96 date: 2002/03/19 16:48:52; author: will; state: Exp; lines: +1 -0 Resurrect patch-startx which changes the default to turn off TCP listening, and adds an option to allow turning it back on. Bump PORTREVISION in XFree86-4-clients only, to denote this feature (re)addition. Submitted by: Jochem Kossen
v. 1.95 date: 2002/03/16 23:40:16; author: will; state: Exp; lines: +19 -22 XFree86 4.2.0 Stage 2: XFree86-4-* miniport upgrades [1] Upgrade to 4.2.0. [2] Allow Wraphelp.c to be fetched by default, set HasXdmAuth=YES by default. Submitted by: [1] sf, taguchi@tohoku.iij.ad.jp Approved by: [2] core
v. 1.94 date: 2002/01/06 20:51:08; author: sf; state: Exp; lines: +0 -0 o pre-fetch: -> pre-everything:: o ECHO -> ECHO_MSG o add comments.
v. 1.93 date: 2002/01/06 20:47:38; author: sf; state: Exp; lines: +6 -8 move pre.mk inclusion to the bottom.
v. 1.92 date: 2001/12/15 02:58:34; author: sf; state: Exp; lines: +1 -1 Fix long-standing bug of this ports: support HasXdmAuth correctly. Previously, devel/imake-4 disables XDM-AUTHORIZATION-1 support whether HasXdmAuth is set to YES or NO if you don't have Wraphelp.c in local ${DISTDIR}. devel/imake-4: rip off meaningless existent check for Wraphelp.c. x11/XFree86-4-libraries: imake-4 change affects libXdmcp.a. ++REVISION. x11/XFree86-4-clients: xdm and chooser depends on libXdmcp.a. ++REVISION. x11-servers/XFree86-{Nest,Print,Server,VFB}: add Wraphelp.c retrieval code. depends on libXdmcp.a. ++REVISION. Reported by: Alan Eldridge Reviewed by: maintainer
v. 1.91 date: 2001/10/28 02:41:04; author: sf; state: Exp; lines: +2 -1 o sync with x11/XFree86-4 - startx -nolisten tcp by default. - set login.conf environment for xdm.
v. 1.90 date: 2001/06/12 14:59:47; author: sf; state: Exp; lines: +8 -12 update to 4.1.0. get rid of version number from comments in Makefile, pkg-comment and pkg-descr. Reviewed by: maintainer
v. 1.89 date: 2001/03/29 12:04:20; author: sf; state: Exp; lines: +3 -3 o fix MASTER_SITE_SUBDIR. o unbreak -clients when USA_RESIDENT does not set. Submitted by: Mori Kouji
v. 1.88 date: 2001/03/25 23:04:39; author: sf; state: Exp; lines: +49 -124 update to 4.0.3. o use internal freetype2 for consistency with x11/XFree86-4. o added xthreads obtained from x11/XFree86-4. o install "ws" type config sample for xdm. o build DRI only if kernel source installed in /sys. o fix Riva128/SGRAM driver(patch-riva_hw.c). PR: 24338(4.0.2) Submitted by: maintainer, keith
v. 1.87 date: 2000/10/08 07:21:03; author: asami; state: Exp; lines: +2 -2 Change PATCHDIR from patches/ to files/. Also change PKGDIR (pkg/ to .) and other pkg variables if they are nearby.
v. 1.86 date: 2000/09/21 08:36:27; author: sobomax; state: Exp; lines: +3 -6 Make life of maintainers of various XFree ports a bit easier by moving MASTER_SITES into bsd.sites.mk (MASTER_SITE_XFREE). Also add officially announced by xfree http mirror. Following is the announcement. [20 September 2000] XFree86 nows offers http download access! This is a big story for those who cannot download via ftp access because of proxy/firewall concerns. This has been generously donated by the Computing Center of the University of Applied Sciences in Esslingen, Germany. This is a full ftp mirror repository which is updated hourly with a connection speed of 20 MegaBit.
v. 1.85 date: 2000/08/25 10:34:29; author: asami; state: Exp; lines: +126 -50 Update to 4.0.1. Remove libraries from -clients. Try to extract only what each port needs. Other miscellaneous bug fixes. Submitted by: maintainer
v. 1.84 date: 2000/06/16 21:52:12; author: asami; state: Exp; lines: +2 -2 Rename INSTALLS_SHLIBS to INSTALLS_SHLIB. (There was a typo in the previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.) Line up the rhs of variable assignments nicely. Remove a couple of extra whitespaces while I'm here. Suggested by: sobomax
v. 1.83 date: 2000/06/16 08:18:12; author: sobomax; state: Exp; lines: +2 -2 Fix MASSIVE typo INSTALL_SHLIBS --> INSTALLS_SHLIBS, which occured because I just cun'n'pasted the name from Satoshi's commit message without checking it. Hall of shame entry: sobomax
v. 1.82 date: 2000/06/15 17:12:28; author: sobomax; state: Exp; lines: +2 -4 Second round of INSTALL_SHLIBS=yes fixes.
v. 1.81 date: 2000/06/08 10:42:08; author: asami; state: Exp; lines: +61 -83 Split up XFree86-4 into several pieces. Pretty green, please test with care. Submitted by: taguchi@tohoku.iij.ad.jp Approved (in spirit) by: jmz (XFree86 port maintainer)
v. 1.80 date: 2000/04/30 08:21:56; author: kris; state: Exp; lines: +3 -1 Mark FORBIDDEN due to the root hole in the X server reported on Bugtraq. I've tried *multiple* times to talk to an XFree86 developer about the problem, but they haven't deigned to respond to me.
v. 1.79 date: 2000/04/16 03:30:37; author: jmz; state: Exp; lines: +2 -1 Set WRKSRC=${WRKDIR}/${DIST_SUBDIR}. Otherwise it will not build.
v. 1.78 date: 2000/04/13 19:09:05; author: cpiazza; state: Exp; lines: +3 -4 Update to use PORTNAME/PORTVERSION
v. 1.77 date: 2000/03/22 21:56:13; author: jmz; state: Exp; lines: +1 -24 Remove support for building on a.out systems.
v. 1.76 date: 2000/03/13 08:29:47; author: asami; state: Exp; lines: +2 -2 xfree86.cdrom.com -> ftp.freesoftware.com
v. 1.75 date: 2000/03/13 08:09:33; author: asami; state: Exp; lines: +3 -2 Comment out "IS_INTERACTIVE=no" -- that is the same as defining it "yes"!
v. 1.74 date: 2000/03/11 00:20:11; author: jmz; state: Exp; lines: +65 -25 Port of the latest XFree86 version (4.0). Not tested on alpha and pc98 (and hence no corresponding PLISTs). Use at your own risk :-)
v. 1.73 date: 2000/02/10 15:50:45; author: jmz; state: Exp; lines: +8 -1 Update the XFree86 3.3.6 port to: - contain the released Rage128 patch (but unfortunately this does not solve all problems with this card under FreeBSD) - fix the release date "January 1999" --> "January 2000" - make it possible to build a package (PLIST problem: lib/X11/doc/BetaReport is not installed with 3.3.6) PR: ports/16626 Submitted by: Udo Schweigert
v. 1.72 date: 2000/01/13 14:14:01; author: jmz; state: Exp; lines: +2 -2 There is a new library: XThrStub
v. 1.71 date: 2000/01/12 03:44:15; author: jmz; state: Exp; lines: +10 -10 Upgrade to version 3.3.6
v. 1.70 date: 1999/12/24 16:42:04; author: markm; state: Exp; lines: +2 -2 Remove the old KerberosIV stuff and PAM-ize. OK'ed by: jmz
v. 1.69 date: 1999/11/24 23:08:06; author: jmz; state: Exp; lines: +1 -6 Unbreak.
v. 1.68 date: 1999/11/23 04:49:34; author: jmz; state: Exp; lines: +5 -2 Unbreak for pre-gcc 2.95 systems
v. 1.67 date: 1999/11/16 19:29:01; author: billf; state: Exp; lines: +3 -1 Mark BROKEN, this defines putenv(), which has preprocessor #ifdef's wrapped around them, but they don't detect it (or we don't tell it what it wants to know.
v. 1.66 date: 1999/11/12 22:09:06; author: obrien; state: Exp; lines: +3 -1 Turn off NO_PACKAGE for the Alpha. XFree86 is not yet providing us bits for that platform.
v. 1.65 date: 1999/10/10 17:25:15; author: jmz; state: Exp; lines: +1 -3 Now that the port is no more marked broken, there is no need to include bsd.port.pre.mk
v. 1.64 date: 1999/10/10 15:53:36; author: marcel; state: Exp; lines: +1 -4 Unbreak for -current.
v. 1.63 date: 1999/10/09 01:50:33; author: jmz; state: Exp; lines: +6 -1 Mark BROKEN for -current (signal.h)
v. 1.62 date: 1999/09/06 23:14:37; author: steve; state: Exp; lines: +1 -2 Remove an extra blank line that I introduced a couple of revs ago.
v. 1.61 date: 1999/09/02 02:37:39; author: jmz; state: Exp; lines: +10 -10 Upgrade to 3.3.5
v. 1.60 date: 1999/08/31 06:53:18; author: mharo; state: Exp; lines: +2 -2 FreeBSD.ORG -> FreeBSD.org Prompted by PR: 13476, 13477 Submitted by: KATO Tsuguru
v. 1.59 date: 1999/08/31 02:50:06; author: peter; state: Exp; lines: +1 -1 $Id$ -> $FreeBSD$
v. 1.58 date: 1999/08/23 04:23:59; author: mharo; state: Exp; lines: +2 -2 grep -> ${GREP} true -> ${TRUE} false -> ${FALSE}
v. 1.57 date: 1999/07/27 14:27:28; author: steve; state: Exp; lines: +5 -1 Add Doug Rabson's patches for XFree86 on the FreeBSD/Alpha with minor tweaks to the PLIST to accomodate the recent upgrade to 3.3.4. Submitted by: dfr Reviewed by: jmz (maintainer)
v. 1.56 date: 1999/07/20 23:42:28; author: asami; state: Exp; lines: +2 -1 Use ${OSVERSION} instead of uname.
v. 1.55 date: 1999/07/20 22:14:55; author: jmz; state: Exp; lines: +10 -16 Upgrade to 3.3.4
v. 1.54 date: 1999/03/19 22:35:25; author: asami; state: Exp; lines: +1 -4 Back out two patches that were not intended for commit.
v. 1.53 date: 1999/03/08 07:28:35; author: asami; state: Exp; lines: +4 -1 Fix to make ports work with bsd.port.mk rev. 1.306. ${MACHINE_ARCH}--freebsd${OSREL} is now passed to CONFIGURE_ARGS if GNU_CONFIGURE is defined. Take the target out of CONFIGURE_ARGS of some ports that added it explicitly; define it as ${MACHINE_ARCH}--freebsd if the port doesn't like the ${OSREL} part; define it as something else (such as ${MACHINE_ARCH}--freebsdelf if the port requires that; define it as an empty string if the port doesn't like it at all. The last might be a sign that a GNU_CONFIGURE port actually doesn't use GNU's version of configure at all; but I don't have time to go look at them all, we'll fix them as time goes on. At least we've got much fewer "-unknown-"s in the tree as the result. :)
v. 1.52 date: 1999/01/27 18:32:15; author: fenner; state: Exp; lines: +5 -5 Fix up MASTER_SITES: ftp.ibp.fr (no such host) -> ftp.lip6.fr ftp.uni-stuttgart.de (broken symlink) -> ftp.cs.tu-berlin.de
v. 1.51 date: 1999/01/11 19:07:14; author: jmz; state: Exp; lines: +9 -2 Upgrade to 3.3.3.1 Submitted by: Taguchi Takeshi
v. 1.50 date: 1998/11/24 01:21:49; author: asami; state: Exp; lines: +2 -2 Typo (was making libX11.so symlink in two places).
v. 1.49 date: 1998/11/23 21:51:08; author: jmz; state: Exp; lines: +10 -17 Upgrade to 3.3.3
v. 1.48 date: 1998/11/14 09:43:34; author: asami; state: Exp; lines: +20 -17 Use bsd.port.{pre,post}.mk to move PORTOBJFORMAT to front, or change shell loops to make loops. Use EXTRA_PKG_FLAGS to add install scripts instead of adding it to PKG_FLAGS after bsd.port.mk.
v. 1.47 date: 1998/10/27 04:12:44; author: jmz; state: Exp; lines: +5 -1 Add support for pc98 machines PR: ports/8230 Reviewed by: jmz Submitted by: NAKAJI Hiroyuki
v. 1.46 date: 1998/09/22 06:08:34; author: asami; state: Exp; lines: +15 -1 Make lib*.so links in a.out case.
v. 1.45 date: 1998/09/21 00:03:21; author: steve; state: Exp; lines: +2 -2 Convert to ELF. These changes are based on a recent thread on the -current mailing list and at least partial credit goes to the following people for this commit: Joachim Kuebart Ollivier Robert NOTE: Kerberos support has been temporarily turned off until someone can make it work.
v. 1.44 date: 1998/08/05 19:28:17; author: jmz; state: Exp; lines: +2 -2 Add 3.3.2-patch3 to PATCHFILES.
v. 1.43 date: 1998/08/05 09:31:39; author: asami; state: Exp; lines: +4 -2 Rename all USE_X11 to USE_X_PREFIX. Requires 1.279 (3.0-current) or 1.227.2.41 (2.2-stable) of bsd.port.mk for this to be interpreted correctly.
v. 1.42 date: 1998/07/03 05:01:55; author: cwt; state: Exp; lines: +2 -2 Upgrade to XFree86 3.3.2p2. If you have tcl/tk 8.0 on your system and haven't rebuilt it in a while, make sure libtcl80.a and libtk80.a have been ranlib-ed, else your build of XFree86 will choke. OK'd by jmz
v. 1.41 date: 1998/05/05 21:47:21; author: jmz; state: Exp; lines: +9 -1 This is bugfix patch number 1 for XFree86 3.3.2. This patch fixes the following problems: - xterm utmp handling problem. - exploitable buffer overflows in xterm related to the preeditType, inputMethod and *Keymap resources. - fix xterm's mishandling of the -vb command line option. - fix an invisible cursor problem with xterm. - exploitable buffer overflows in setuid programs using the Xaw library which are related to the preeditType and inputMethod resources.
v. 1.40 date: 1998/04/03 22:59:40; author: jmz; state: Exp; lines: +2 -1 Don't try to untar Wraphelp.c if USA_RESIDENT=NO
v. 1.39 date: 1998/03/19 14:57:10; author: markm; state: Exp; lines: +22 -1 Enable all sorts of useful security features: o XDM-AUTHORIZATION-1 is more automated for the non-USA case. o PST's KerberosIV patches are reinstated for XDM. This is NOT a full-blown KerberosIV implementation for X - this will just get you a TGT when you log in - THATS ALL! o Enable compilation of SecureRPC. The use of SecureRPC at the moment is frought with danger! I have no idea how safe or good the implementation is. Enable at your own peril!! (Secure RPC is only available for those folk using 3.0-Current). Also allow XF86Setup to use TK-8.0. OK'ed By: JMZ
v. 1.38 date: 1998/03/08 17:13:18; author: jmz; state: Exp; lines: +9 -9 Upgrade to version 3.3.2.
v. 1.37 date: 1997/12/04 10:52:50; author: asami; state: Exp; lines: +2 -1 Add NO_PACKAGE, we're not going to distribute packages for this as long as XFree86 is also doing so.
v. 1.36 date: 1997/08/23 20:37:17; author: jmz; state: Exp; lines: +6 -6 Adjust directory in MASTER_SITES.
v. 1.35 date: 1997/08/23 16:35:19; author: jmz; state: Exp; lines: +6 -4 Upgrade to version 3.3.1
v. 1.34 date: 1997/07/17 15:12:59; author: max; state: Exp; lines: +2 -2 ldconfig -> ${LDCONFIG}.
v. 1.33 date: 1997/07/14 06:36:30; author: asami; state: Exp; lines: +1 -5 This is not necessary anymore, as all directories are pre-created by mtree (BSD.x11.dist).
v. 1.32 date: 1997/07/13 18:49:30; author: max; state: Exp; lines: +2 -2 /bin/sh -> ${SH}
v. 1.31 date: 1997/06/10 12:33:48; author: jmz; state: Exp; lines: +2 -2 One of the distfiles (the fonts distribution) was for version 3.2
v. 1.30 date: 1997/06/09 12:45:23; author: jmz; state: Exp; lines: +9 -20 Upgrade to 3.3 Package not tested - I will upgrade PLIST later.
v. 1.29 date: 1997/02/06 07:53:04; author: asami; state: Exp; lines: +3 -3 Put distribution patches in a separate dir.
v. 1.28 date: 1997/02/05 02:57:10; author: jmz; state: Exp; lines: +2 -1 PATCH_DIST_STRIP=-p1 is required for fix-01
v. 1.27 date: 1997/02/02 17:25:14; author: jmz; state: Exp; lines: +8 -1 There is a fix (3.2-fix-01) from XFree86. I did not a make - this is untested!!
v. 1.26 date: 1997/01/08 12:27:18; author: asami; state: Exp; lines: +8 -2 Pre-create all necessary manpage and catpage directories.
v. 1.25 date: 1996/12/25 05:56:07; author: ache; state: Exp; lines: +1 -4 Quick hack of KOI8-R locale to make it work: add ISO8859-1:GR also it is not true. ISO8859-1:GR _always_ searched for pressed 8bit key independently of locale information, so only ISO8859-1 locales really works. Remove NO_PACKAGE, because XFree distributed package not have this fixes.
v. 1.24 date: 1996/12/07 12:51:19; author: asami; state: Exp; lines: +2 -2 Add NO_PACKAGE reason (package available from XFree86).
v. 1.23 date: 1996/11/25 02:29:26; author: jmz; state: Exp; lines: +2 -1 Remove the suid bit of SuperProbe. According to Marc Slemko (ma v. 1.22 date: 1996/11/10 12:05:56; author: peter; state: Exp; lines: +2 -2 Master site path for xfree86.cdrom.com was incorrect (of all places :-)
v. 1.21 date: 1996/11/09 02:08:50; author: asami; state: Exp; lines: +20 -27 Split out contrib part (is now x11/XFree86-contrib port). Make this Makefile look like one for a regular port. Full PLIST will follow later, I'm doing a recompile now. Reviewed by: jmz
v. 1.20 date: 1996/11/06 13:37:54; author: jmz; state: Exp; lines: +11 -97 Upgrade to version 3.2
v. 1.19 date: 1996/09/10 23:10:40; author: asami; state: Exp; lines: +2 -1 Add USE_X11 in Makefile, delete @cwd /usr/X11R6 from pkg/PLIST (this one was ignored anyway). Problem reported by: Karl Denninger
v. 1.18 date: 1996/07/19 14:35:11; author: jmz; state: Exp; lines: +25 -8 Remove duplicate code, use DIST_SUBDIR to specify where files have to go, merge Makefile and Makefile.ftp Submitted by: asami
v. 1.17 date: 1996/02/15 00:53:15; author: jmz; state: Exp; lines: +15 -1 Assume X11_VIA_FTP=yes if one distribution file (xc-1.tar.gz) exists closes PR ports/690
v. 1.16 date: 1996/01/16 14:08:19; author: jmz; state: Exp; lines: +2 -2 /usr/ports/distfiles -> ${DISTDIR} Submitted by: jhs
v. 1.15 date: 1995/10/06 22:11:25; author: asami; state: Exp; lines: +2 -1 Add CATEGORIES=x11. If this is not in category x11, what else can be?!? ;>
v. 1.14 date: 1995/09/16 01:32:32; author: jmz; state: Exp; lines: +3 -3 Upgrade to 3.1.2
v. 1.13 date: 1995/08/23 07:08:06; author: asami; state: Exp; lines: +2 -1 Add "CATEGORIES=x11". Boy, was I surprised to find this baby in the orphans dir!
v. 1.12 date: 1995/06/24 11:42:06; author: asami; state: Exp; lines: +4 -1 Add post-install: pkg_add -m ${PREFIX}/lib to Makefiles and @exec ldconfig -m %D to packing lists of ports that install shared libraries. This should get rid of a huge chunk of confusion for novice users! All hail Paul Kranenburg! :)
v. 1.11 date: 1995/06/17 01:29:06; author: jmz; state: Exp; lines: +2 -1 Set DISTFILES so that the files will be checksum'ed (only with FTP build)
v. 1.10 date: 1995/05/17 13:07:13; author: jmz; state: Exp; lines: +5 -16 Bug fixes for compilation from the O'Reilly and Associates CDROM Reviewed by: jmz Submitted by: Mark Murray
v. 1.9 date: 1995/05/13 05:42:15; author: asami; state: Exp; lines: +4 -1 Define NO_PACKAGE for now, we aren't building the package of this thing yet. The user can define FORCE_PACKAGE if the package is really desired.
v. 1.8 date: 1995/04/26 14:45:15; author: jmz; state: Exp; lines: +8 -6 Use 'do-install:' instead of 'install:' Complain and fail if no build option is set.
v. 1.7 date: 1995/04/22 22:39:30; author: jmz; state: Exp; lines: +11 -16 Changes for the new bsd.port.mk
v. 1.6 date: 1995/04/13 15:22:11; author: jmz; state: Exp; lines: +2 -1 Add the MAINTAINER line.
v. 1.5 date: 1995/04/12 20:26:23; author: asami; state: Exp; lines: +14 -0 Now the rest of the ports Makefiles....
v. 1.4 date: 1995/03/23 21:20:25; author: jmz; state: Exp; lines: +16 -4 Here is a patch for XFree86 to allow the proud owner of "The X Companion CD for R6" from O'Reilly and Associates, Inc, to mount and compile X on this CD. I have tried to create this patch in such a way that if any other CD's come along, they can be kluged in too. Submitted by: Mark Murray
v. 1.3 date: 1995/02/17 01:23:28; author: jmz; state: Exp; lines: +29 -9 Makefiles have been simplified, and most of the work is now done in configure. In particular patches are now done by the script. The port is now interactive, (ask for servers to be build, if you want to build fonts, etc) This time I have build it (successfully) from a cdrom.
v. 1.2 date: 1995/02/10 00:17:02; author: jmz; state: Exp; lines: +10 -4 Upgrade to XFree86-3.1.1
v. 1.1 date: 1995/01/05 03:51:12; author: jmz; state: Exp; branches: 1.1.1; Initial revision
v. 1.1.1.1 date: 1995/01/05 03:51:13; author: jmz; state: Exp; lines: +0 -0 This is X11R6/XFree86 3.1 The actual makefile does nothing! You have to edit it and remove a comment to build the beast. Note: there are in fact 2 makefiles: one which fetches the files from ftp.x.org and another which allows to compile from a cdrom. Note2: I have not extensively tested the port! (only one build!) ============================================================================= v. 1.142 date: 2007/09/13 19:44:56; author: flz; state: Exp; lines: +3 -0 - Update X.org ports to 7.3. - Mark XFree86-4 as DEPRECATED with EXPIRATION_DATE set to 2007-12-25. I hope that nobody will be bored enough on Christmas to remove them on that day. Tested by: vehemens, Rene Ladan, Beech Rintoul, sarek on x11@
v. 1.141 date: 2007/05/19 20:25:47; author: flz; state: Exp; lines: +1 -1 - Welcome X.org 7.2 \o/. - Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}. - Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.140 date: 2006/10/18 18:07:21; author: marcus; state: Exp; lines: +1 -0 Actually commit the Makefile bit to allow the patch-programs::fonttosfnt::util.c to apply. Reminded by: Scott Allendorf Approved by: portmgr (implicit)
v. 1.139 date: 2006/03/30 09:00:25; author: lesi; state: Exp; lines: +1 -1 Since fontconfig by default generates font cache file in directory where this port installs charmaps, try to remove it upon uninstallation, so removing of directory has a chance to succeed. Just in case some user has for some reason put fonts in here, be nice and try to regenerate cache file and remove it again only if it is empty. Pointed out by: pointyhat via kris
v. 1.138 date: 2006/01/30 23:20:05; author: kuriyama; state: Exp; lines: +2 -2 Chase shlib bump of libexpat.
v. 1.137 date: 2005/11/13 21:05:05; author: lesi; state: Exp; lines: +23 -10 Abandon installing xterm as xterm-static. There are checks in XFree-4-clients and xorg-clients that conditionally create symlinks to xterm-static if there is no xterm present so chances of loosing ability to run xterm after upgrade should be minimized. These checks shall go away in due time. Discussed with: krion
v. 1.136 date: 2005/11/11 22:16:11; author: lesi; state: Exp; lines: +3 -1 If port belongs to X11 distribution different than ${X_WINDOW_SYSTEM} one, point to The X Window System and Virtual Consoles chapter of FAQ. Add SHA256.
v. 1.135 date: 2005/06/15 02:39:58; author: lesi; state: Exp; lines: +7 -13 Upgrade to XFree86 4.5.0. Ports changes: - Drop dependency on x11/wrapper. X server already contains this code (programs/Xserver/os/utils.c rev. 3.58). - Install default SecurityPolicy with XFree86-4-libraries, thus avoiding plists and who-owns-what complications between different fooServer ports. Copy default file to real one if that doesn't exist and remove both upon uninstall if they are the same. - Revert change to Imake.rules rev. 3.132 in devel/imake-4 port, since couple of ports break with this change (devel/imake-4/files/patch-Imake.rules) - Add grehans patches for PPC [1] - Several of directories that were previously in /etc/mtree/BSD.x11-4.dist were moved to respective ports pkg-plists PR: [1] 78345, 78346, 78348, 78352, 78353, 78354, 78355, 78356
v. 1.134 date: 2005/02/14 19:40:04; author: lesi; state: Exp; lines: +1 -1 Fix plist. Reported by: pointyhat via kris
v. 1.133 date: 2005/01/30 19:38:22; author: lesi; state: Exp; lines: +2 -1 Clarify message about how to install luit setuid a bit. Noticed by: Rostislav Krasny (rosti_bsd at yahoo.com)
v. 1.132 date: 2005/01/14 23:42:45; author: lesi; state: Exp; lines: +1 -1 Properly fix the termios race rather than disabling copyTermios. PR: ports/74981 Submitted by: Rong-En Fan, rafan at infor dotorg Obtained from: XFree86 Bugzilla #867
v. 1.131 date: 2004/12/23 05:31:03; author: lesi; state: Exp; lines: +1 -1 Bump PORTREVISION, since html manpages are no longer built/installed and that changes packaging content.
v. 1.130 date: 2004/11/05 02:47:23; author: lesi; state: Exp; lines: +1 -1 Bump PORTREVISION for previous change, since it changes package contents. Reminded by: anholt
v. 1.129 date: 2004/10/29 03:24:48; author: lesi; state: Exp; lines: +5 -3 Install Faroese (fo) keyboard layout. Pet portlint while here. Reported by: ice (ice2000 at post olivant fo)
v. 1.128 date: 2004/08/23 11:02:09; author: lesi; state: Exp; lines: +14 -5 Instead of installing xterm here, depend on x11/xterm port. Taken from xorg-clients port. Suggested by: krion Approved by: anholt (mentor)
v. 1.127 date: 2004/08/10 01:29:15; author: marcus; state: Exp; lines: +14 -8 Update XFree86 clients to 4.4 release. Release notes are available at http://www.xfree86.org/4.4.0/RELNOTES.html PR: ports/67733 imake ports/67508 libraries ports/67510 clients ports/67513 server ports/67776 100dpi fonts ports/67777 75dpi fonts ports/67778 cyrillic fonts ports/67779 default bitmap fonts ports/67781 font encodings ports/67783 scalable fonts ports/67784 font server ports/67785 XFree86 meta-port ports/67775 documents ports/67786 manpages ports/67787 nest server ports/67788 print server ports/67789 virtual framebuffer server ports/56487 (Upgrading Xfree86-clients from ports overwrites xdm config files) ports/44252 (XFree86-4-Server port removes/overwrites config files) Submitted by: Dejan Lesjak (dejan DOT lesjak AT ijs DOT si) Additional changes by: anholt Jung-uk Kim (jkim AT niksun DOT com) arved Tested by: pointyhat linimon
v. 1.126 date: 2004/07/23 19:10:18; author: anholt; state: Exp; lines: +6 -0 - Add the X_WINDOW_SYSTEM={xorg,xfree86-4,xfree86-3} variable to bsd.port.mk, and make XFREE86_VERSION map to it. XFREE86_VERSION is now deprecated. - Make xorg the default X_WINDOW_SYSTEM on -current. - Add several new X_*_PORT variables which point to various pieces of X11 based on the setting of X_WINDOW_SYSTEM, and make ports use them. - Add information to CHANGES about how to handle the transition. PR: ports/68763 Approved by: portmgr (marcus) Approved by: re (scottl)
v. 1.125 date: 2004/05/31 06:15:41; author: anholt; state: Exp; lines: +2 -0 Register CONFLICTS on xorg-clients.
v. 1.124 date: 2004/05/29 20:51:16; author: anholt; state: Exp; lines: +1 -1 Link programs that link against Xfont against freetype. This will be required with newer libXfont that uses freetype, but causes no harm in the meantime.
v. 1.123 date: 2004/03/18 02:58:52; author: des; state: Exp; lines: +2 -1 Add dependency on expat2.
v. 1.122 date: 2004/03/17 07:04:14; author: lofi; state: Exp; lines: +1 -1 Fix build with freetype2-2.1.7.
v. 1.121 date: 2004/03/16 22:54:03; author: marcus; state: Exp; lines: +1 -1 Chase the new location of libXft.
v. 1.120 date: 2004/01/03 21:35:04; author: kan; state: Exp; lines: +2 -1 Merge a fix/workaround for changed 'cpp -traditional' behaviour from XFree86 4.3.99.
v. 1.119 date: 2003/12/12 23:19:06; author: anholt; state: Exp; lines: +4 -0 Bah. Some of the servers don't have the fonts/util/, causing failure due to patches being shared by all the ports. So, add them to clients only and use EXTRA_PATCHES. This should be done to more patches from XFree86-4-libraries.
v. 1.118 date: 2003/12/12 22:55:31; author: anholt; state: Exp; lines: +1 -1 Use #!/usr/bin/env perl instead of #!/usr/bin/perl to increase the chances of success.
v. 1.117 date: 2003/11/12 01:02:18; author: anholt; state: Exp; lines: +1 -1 Switch MAINTAINER to x11@FreeBSD.org for group maintaining of these ports.
v. 1.116 date: 2003/11/11 04:09:42; author: anholt; state: Exp; lines: +1 -1 Disable the patch from XFree86 bug 641 to copy the terminal's settings in luit to its new pty. This code doesn't work for some reason and produces "Couldn't copy terminal settings" when luit is run manually or the symptom of an xterm -lc flashing on screen and exiting. Submitted by: Guido Berhoerster
v. 1.115 date: 2003/11/09 04:44:30; author: anholt; state: Exp; lines: +14 -2 Update luit (helper app that does locale translation for xterm) in XFree86-4-clients from XFree86 CVS. This allows luit to be used setuid, which closes a security hole (tty left world-writable) that luit complains about on startup if not setuid. Setting WITH_SETUID_LUIT installs luit setuid. PR: ports/51632 Submitted by: Guido Berhoerster Help from: ITO Tsuyoshi
v. 1.114 date: 2003/08/12 18:35:36; author: anholt; state: Exp; lines: +1 -1 [1] Fix xdmcp queries in the X servers (bug 277) [2] Fix underlining in the freetype backend (bug 330) PR: [1] ports/52387 [2] ports/55134 Submitted by: [1] Joel Ray Holveck [2] Ariff Abdullah
v. 1.113 date: 2003/05/14 07:02:06; author: anholt; state: Exp; lines: +3 -10 [1] Make the HTML manpages get put into the packages again. [2] Check that XFREE86_VERSION=4 is set when building, rather than setting it. [3] Move many common Makefile bits to XFree86-4-libraries/Makefile.inc [4] Make the XFree86-4-Server port not install libXfont.so. [5] Move the xcursor.pc file to its proper location in ${X11BASE}/libdata/pkgconfig [6] Don't explicitly link libGL.so against libc, for the sake of 4.x's pthreads. Submitted by: [5,6] Ports Fury
v. 1.112 date: 2003/03/15 04:30:03; author: anholt; state: Exp; lines: +1 -0 Re-add patch-xdm_session.c which was accidentally dropped in the 4.3.0 upgrade. This fixes problems with environment not being set in xdm sessions. Submitted by: many Approved by: portmgr (kris)
v. 1.111 date: 2003/03/11 23:38:06; author: anholt; state: Exp; lines: +9 -27 Update XFree86 ports, including linux_dri, to 4.3.0. Set IGNORE= in dri-devel for being outdated. Thank you to all the testers and people who submitted patches for this update. Approved by: portmgr
v. 1.110 date: 2003/03/07 06:36:08; author: ade; state: Exp; lines: +1 -0 Clear moonlight beckons. Requiem mors pacem pkg-comment, And be calm ports tree. E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.109 date: 2003/02/19 08:06:54; author: anholt; state: Exp; lines: +1 -1 Fix XFree86-4-libraries after Xft renaming removal: Add `pkg-config xft --cflags` and --libs to Imakefiles of programs that use Xft and remove a bit of code not needed for Xft2, remove xftcache program. Reported by: many
v. 1.108 date: 2003/02/18 04:51:28; author: anholt; state: Exp; lines: +2 -1 Remove the renaming of Xft headers and library from the Xft (Xft2) port. Remove installing of Xft1 from XFree86-4-libraries, and add dependencies to the Xft port by all the ports that use it along with whatever patches are necessary. Approved by: portmgr (kris), marcus
v. 1.107 date: 2002/10/18 00:21:42; author: anholt; state: Exp; lines: +3 -3 Fix distfiles after the last commit (bad copy'n'pasting). PR: 44184
v. 1.106 date: 2002/10/17 07:19:50; author: anholt; state: Exp; lines: +11 -14 [1] Make the 4.2.1 ports all use the merged 4.2.1+mitshm patch. [2] Make the ports respect CFLAGS better. Now CFLAGS (and CC/CXX) are set for the build during the configure stage. PR: [2] 40271, 43369
v. 1.105 date: 2002/09/18 04:22:29; author: anholt; state: Exp; lines: +7 -12 Update XFree86-4-* ports which share XFree86-4-libraries's patches: - Reduce build times by not rebuilding some programs/libraries in each port. - Move some files from -clients to -libraries and from -libraries to -server. - Make package-building in XFree86-4 more intuitive PR: 41606 (package building)
v. 1.104 date: 2002/09/05 03:48:11; author: anholt; state: Exp; lines: +14 -8 Update XFree86-4-clients, -Servers, and -libraries to 4.2.1. The most notable update is fixing what appears to be possible privelege escalation with libX11 and setuid clients (xterm is one).
v. 1.103 date: 2002/08/21 21:58:44; author: anholt; state: Exp; lines: +1 -1 Fix the us_intl keymap. Submitted by: Mario Sergio Fujikawa Ferreira Obtained from: Andoni Zubimendi
v. 1.102 date: 2002/08/21 05:09:01; author: anholt; state: Exp; lines: +4 -1 Add LIB_DEPENDS for freetype and libGLU, both of which are required to compile. XFree86-4-libraries (for GLU) is already depended on, but people upgrading from older X could miss the dependency.
v. 1.101 date: 2002/08/05 07:26:01; author: anholt; state: Exp; lines: +1 -1 1. Use XlcDL.c from X CVS to help people with Korean or Japanese XIM and GTK+ 2. Update PCI IDs and nv driver to include newer nv chipsets 3. Add SHM to XFree86's libc wrapper on bsd to help with nv binary drivers. 4. Fix mouse scrollwheels on -current (new gcc) Submitted by: [1] Hye-Shik Chang [2] Chris Dillon [3] Matthew N. Dodd [4] Ted Lindgreen Approved by: mdodd
v. 1.100 date: 2002/08/02 02:57:04; author: anholt; state: Exp; lines: +9 -9 gzip Wraphelp.c and put it in local_distfiles, to help users having troubles downloading it. Move freebsd-glide3headers there too. Update BUILD_DEPENDS for font ports to catch new requirements as of 4.2.0. PR: 40362, 40759 Approved by: des (mentor)
v. 1.99 date: 2002/07/18 20:29:46; author: anholt; state: Exp; lines: +1 -3 Make XFree86-4 miniports use imake-4's HasXdmAuth setting (default is YES). Clean up Wraphelp.c inclusion in the ports that need it. Add USE_PERL5 to imake-4. Approved by: des
v. 1.98 date: 2002/07/14 20:26:02; author: anholt; state: Exp; lines: +2 -1 Take over maintainership of XFree86-4 ports. Add patches to fix libGLU on -current, fix the DRI with Wine, update the config files for the X ports, and fix many of them to allow continuing of the X build after interruption (it used to clean and rebuild). Approved by: will, des (mentor)
v. 1.97 date: 2002/03/20 00:18:36; author: will; state: Exp; lines: +1 -1 Add fix for XDM: Use SU="su -m" instead of SU="su", otherwise given the default setup for the "nobody" account, login will fail. PORTREVISION bumped to include this fix for XFree86-4-clients. PR: 36084 Submitted by: Stefan `Sec` Zehl
v. 1.96 date: 2002/03/19 16:48:52; author: will; state: Exp; lines: +1 -0 Resurrect patch-startx which changes the default to turn off TCP listening, and adds an option to allow turning it back on. Bump PORTREVISION in XFree86-4-clients only, to denote this feature (re)addition. Submitted by: Jochem Kossen
v. 1.95 date: 2002/03/16 23:40:16; author: will; state: Exp; lines: +19 -22 XFree86 4.2.0 Stage 2: XFree86-4-* miniport upgrades [1] Upgrade to 4.2.0. [2] Allow Wraphelp.c to be fetched by default, set HasXdmAuth=YES by default. Submitted by: [1] sf, taguchi@tohoku.iij.ad.jp Approved by: [2] core
v. 1.94 date: 2002/01/06 20:51:08; author: sf; state: Exp; lines: +0 -0 o pre-fetch: -> pre-everything:: o ECHO -> ECHO_MSG o add comments.
v. 1.93 date: 2002/01/06 20:47:38; author: sf; state: Exp; lines: +6 -8 move pre.mk inclusion to the bottom.
v. 1.92 date: 2001/12/15 02:58:34; author: sf; state: Exp; lines: +1 -1 Fix long-standing bug of this ports: support HasXdmAuth correctly. Previously, devel/imake-4 disables XDM-AUTHORIZATION-1 support whether HasXdmAuth is set to YES or NO if you don't have Wraphelp.c in local ${DISTDIR}. devel/imake-4: rip off meaningless existent check for Wraphelp.c. x11/XFree86-4-libraries: imake-4 change affects libXdmcp.a. ++REVISION. x11/XFree86-4-clients: xdm and chooser depends on libXdmcp.a. ++REVISION. x11-servers/XFree86-{Nest,Print,Server,VFB}: add Wraphelp.c retrieval code. depends on libXdmcp.a. ++REVISION. Reported by: Alan Eldridge Reviewed by: maintainer
v. 1.91 date: 2001/10/28 02:41:04; author: sf; state: Exp; lines: +2 -1 o sync with x11/XFree86-4 - startx -nolisten tcp by default. - set login.conf environment for xdm.
v. 1.90 date: 2001/06/12 14:59:47; author: sf; state: Exp; lines: +8 -12 update to 4.1.0. get rid of version number from comments in Makefile, pkg-comment and pkg-descr. Reviewed by: maintainer
v. 1.89 date: 2001/03/29 12:04:20; author: sf; state: Exp; lines: +3 -3 o fix MASTER_SITE_SUBDIR. o unbreak -clients when USA_RESIDENT does not set. Submitted by: Mori Kouji
v. 1.88 date: 2001/03/25 23:04:39; author: sf; state: Exp; lines: +49 -124 update to 4.0.3. o use internal freetype2 for consistency with x11/XFree86-4. o added xthreads obtained from x11/XFree86-4. o install "ws" type config sample for xdm. o build DRI only if kernel source installed in /sys. o fix Riva128/SGRAM driver(patch-riva_hw.c). PR: 24338(4.0.2) Submitted by: maintainer, keith
v. 1.87 date: 2000/10/08 07:21:03; author: asami; state: Exp; lines: +2 -2 Change PATCHDIR from patches/ to files/. Also change PKGDIR (pkg/ to .) and other pkg variables if they are nearby.
v. 1.86 date: 2000/09/21 08:36:27; author: sobomax; state: Exp; lines: +3 -6 Make life of maintainers of various XFree ports a bit easier by moving MASTER_SITES into bsd.sites.mk (MASTER_SITE_XFREE). Also add officially announced by xfree http mirror. Following is the announcement. [20 September 2000] XFree86 nows offers http download access! This is a big story for those who cannot download via ftp access because of proxy/firewall concerns. This has been generously donated by the Computing Center of the University of Applied Sciences in Esslingen, Germany. This is a full ftp mirror repository which is updated hourly with a connection speed of 20 MegaBit.
v. 1.85 date: 2000/08/25 10:34:29; author: asami; state: Exp; lines: +126 -50 Update to 4.0.1. Remove libraries from -clients. Try to extract only what each port needs. Other miscellaneous bug fixes. Submitted by: maintainer
v. 1.84 date: 2000/06/16 21:52:12; author: asami; state: Exp; lines: +2 -2 Rename INSTALLS_SHLIBS to INSTALLS_SHLIB. (There was a typo in the previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.) Line up the rhs of variable assignments nicely. Remove a couple of extra whitespaces while I'm here. Suggested by: sobomax
v. 1.83 date: 2000/06/16 08:18:12; author: sobomax; state: Exp; lines: +2 -2 Fix MASSIVE typo INSTALL_SHLIBS --> INSTALLS_SHLIBS, which occured because I just cun'n'pasted the name from Satoshi's commit message without checking it. Hall of shame entry: sobomax
v. 1.82 date: 2000/06/15 17:12:28; author: sobomax; state: Exp; lines: +2 -4 Second round of INSTALL_SHLIBS=yes fixes.
v. 1.81 date: 2000/06/08 10:42:08; author: asami; state: Exp; lines: +61 -83 Split up XFree86-4 into several pieces. Pretty green, please test with care. Submitted by: taguchi@tohoku.iij.ad.jp Approved (in spirit) by: jmz (XFree86 port maintainer)
v. 1.80 date: 2000/04/30 08:21:56; author: kris; state: Exp; lines: +3 -1 Mark FORBIDDEN due to the root hole in the X server reported on Bugtraq. I've tried *multiple* times to talk to an XFree86 developer about the problem, but they haven't deigned to respond to me.
v. 1.79 date: 2000/04/16 03:30:37; author: jmz; state: Exp; lines: +2 -1 Set WRKSRC=${WRKDIR}/${DIST_SUBDIR}. Otherwise it will not build.
v. 1.78 date: 2000/04/13 19:09:05; author: cpiazza; state: Exp; lines: +3 -4 Update to use PORTNAME/PORTVERSION
v. 1.77 date: 2000/03/22 21:56:13; author: jmz; state: Exp; lines: +1 -24 Remove support for building on a.out systems.
v. 1.76 date: 2000/03/13 08:29:47; author: asami; state: Exp; lines: +2 -2 xfree86.cdrom.com -> ftp.freesoftware.com
v. 1.75 date: 2000/03/13 08:09:33; author: asami; state: Exp; lines: +3 -2 Comment out "IS_INTERACTIVE=no" -- that is the same as defining it "yes"!
v. 1.74 date: 2000/03/11 00:20:11; author: jmz; state: Exp; lines: +65 -25 Port of the latest XFree86 version (4.0). Not tested on alpha and pc98 (and hence no corresponding PLISTs). Use at your own risk :-)
v. 1.73 date: 2000/02/10 15:50:45; author: jmz; state: Exp; lines: +8 -1 Update the XFree86 3.3.6 port to: - contain the released Rage128 patch (but unfortunately this does not solve all problems with this card under FreeBSD) - fix the release date "January 1999" --> "January 2000" - make it possible to build a package (PLIST problem: lib/X11/doc/BetaReport is not installed with 3.3.6) PR: ports/16626 Submitted by: Udo Schweigert
v. 1.72 date: 2000/01/13 14:14:01; author: jmz; state: Exp; lines: +2 -2 There is a new library: XThrStub
v. 1.71 date: 2000/01/12 03:44:15; author: jmz; state: Exp; lines: +10 -10 Upgrade to version 3.3.6
v. 1.70 date: 1999/12/24 16:42:04; author: markm; state: Exp; lines: +2 -2 Remove the old KerberosIV stuff and PAM-ize. OK'ed by: jmz
v. 1.69 date: 1999/11/24 23:08:06; author: jmz; state: Exp; lines: +1 -6 Unbreak.
v. 1.68 date: 1999/11/23 04:49:34; author: jmz; state: Exp; lines: +5 -2 Unbreak for pre-gcc 2.95 systems
v. 1.67 date: 1999/11/16 19:29:01; author: billf; state: Exp; lines: +3 -1 Mark BROKEN, this defines putenv(), which has preprocessor #ifdef's wrapped around them, but they don't detect it (or we don't tell it what it wants to know.
v. 1.66 date: 1999/11/12 22:09:06; author: obrien; state: Exp; lines: +3 -1 Turn off NO_PACKAGE for the Alpha. XFree86 is not yet providing us bits for that platform.
v. 1.65 date: 1999/10/10 17:25:15; author: jmz; state: Exp; lines: +1 -3 Now that the port is no more marked broken, there is no need to include bsd.port.pre.mk
v. 1.64 date: 1999/10/10 15:53:36; author: marcel; state: Exp; lines: +1 -4 Unbreak for -current.
v. 1.63 date: 1999/10/09 01:50:33; author: jmz; state: Exp; lines: +6 -1 Mark BROKEN for -current (signal.h)
revisio



Main menu

FreeBSD

Program categories

Freebsd accessibility
Freebsd archivers
Freebsd astro
Freebsd audio
Freebsd benchmarks
Freebsd biology
Freebsd cad
Freebsd chinese
Freebsd comms
Freebsd converters
Freebsd databases
Freebsd deskutils
Freebsd devel
Freebsd dns
Freebsd editors
Freebsd emulators
Freebsd finance
Freebsd french
Freebsd ftp
Freebsd games
Freebsd german
Freebsd graphics
Freebsd hebrew
Freebsd hungarian
Freebsd irc
Freebsd japanese
Freebsd java
Freebsd korean
Freebsd lang
Freebsd mail
Freebsd math
Freebsd mbone
Freebsd misc
Freebsd multimedia
Freebsd net
Freebsd net-im
Freebsd net-mgmt
Freebsd net-p2p
Freebsd news
Freebsd palm
Freebsd polish
Freebsd ports-mgmt
Freebsd portuguese
Freebsd print
Freebsd russian
Freebsd science
Freebsd security
Freebsd shells
Freebsd sysutils
Freebsd textproc
Freebsd ukrainian
Freebsd vietnamese
Freebsd www
Freebsd x11
Freebsd x11-clocks
Freebsd x11-drivers
Freebsd x11-fm
Freebsd x11-fonts
Freebsd x11-servers
Freebsd x11-themes
Freebsd x11-toolkits
Freebsd x11-wm