The FreeBSD Ports Archive

FreeBSD x11-themes : gtkstep

A theme module to make GTK+ look like the NeXTSTEP(tm) interface

 GTKstep is a GTK+ theme engine to improve the boring 
GTK+ look and feel with the NeXTSTEP(tm) look and feel. 
 

gtkstep history

v. 1.36
date: 2007/05/19 20:30:21;  author: flz;  state: Exp;  lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

v. 1.35
date: 2007/03/28 11:56:32;  author: pav;  state: Exp;  lines: +1 -0
- Fix after objformat removal

Reported by:	pointyhat

v. 1.34
date: 2006/10/14 08:53:58;  author: marcus;  state: Exp;  lines: +2 -3
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:	mezz, ahze, pav, and many others
Approved by:	portmgr (implicit, kris)

v. 1.33
date: 2006/05/13 05:00:29;  author: edwin;  state: Exp;  lines: +0 -1
Remove USE_REINPLACE from categories starting with X

v. 1.32
date: 2006/02/23 10:40:09;  author: ade;  state: Exp;  lines: +2 -2
Conversion to a single libtool environment.

Approved by:	portmgr (kris)

v. 1.31
date: 2005/11/15 06:51:54;  author: ade;  state: Exp;  lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

v. 1.30
date: 2005/06/03 20:18:10;  author: oliver;  state: Exp;  lines: +6 -1
change the libtool version to use from 1.3 to 1.5

v. 1.29
date: 2004/07/09 17:43:01;  author: marcus;  state: Exp;  lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:		63944
Based on work by:eik and marcus
Approved by:	ade (autotools maintainer)
Tested by:	kris on pointyhat
Bound to be hidden problems:	You bet

v. 1.28
date: 2004/06/02 09:13:45;  author: pav;  state: Exp;  lines: +1 -1
- Move to new category x11-themes.

PR:		ports/67478
Submitted by:	pav
Repocopy by:	marcus

v. 1.27
date: 2004/03/14 06:17:48;  author: ade;  state: Exp;  lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

	USE_LIBTOOL=YES		->	USE_LIBTOOL_VER=13
	USE_AUTOCONF=YES	->	USE_AUTOCONF_VER=213
	USE_AUTOMAKE=YES	->	USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

v. 1.26
date: 2004/02/04 05:10:07;  author: marcus;  state: Exp;  lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

v. 1.25
date: 2003/12/15 21:31:51;  author: krion;  state: Exp;  lines: +5 -1
- Fix MASTER_SITES
- Remove obsolete WWW: line

PR:		60274
Submitted by:	Ports Fury

v. 1.24
date: 2003/06/09 09:46:36;  author: erwin;  state: Exp;  lines: +1 -2
o Fix MASTER_SITES
o change in distinfo because the new distfile is a .tar.gz .
  but there is no change between both the old and new distfile.

PR:		53075
Submitted by:	Serge Gagnon 
Approved by:	edwin (mentor)

v. 1.23
date: 2003/04/20 19:54:02;  author: marcus;  state: Exp;  lines: +0 -1
Remove USE_GNOMENG.

v. 1.22
date: 2003/02/20 19:20:22;  author: knu;  state: Exp;  lines: +1 -0
De-pkg-comment.

v. 1.21
date: 2003/01/19 20:36:00;  author: sobomax;  state: Exp;  lines: +1 -1
Release to the wild.

v. 1.20
date: 2002/09/02 03:58:16;  author: lioux;  state: Exp;  lines: +2 -1
Deploy USE_GNOMENG infrastructure

PR:		42309
Submitted by:	Edwin Groothuis 

v. 1.19
date: 2001/04/09 08:03:32;  author: sobomax;  state: Exp;  lines: +2 -2
Update WWW and MASTER_SITES.

Submitted by:	FDS

v. 1.18
date: 2001/02/05 16:49:01;  author: olgeni;  state: Exp;  lines: +2 -2
Batch of style fixes for x11-toolkits.

v. 1.17
date: 2000/11/03 15:35:26;  author: sobomax;  state: Exp;  lines: +3 -3
- Update to 2.2;
- take over maintainership.

PR:		22424
Submitted by:	PF

v. 1.16
date: 2000/10/05 06:42:46;  author: reg;  state: Exp;  lines: +2 -6
Implement USE_GTK, part 2.

v. 1.15
date: 2000/04/10 01:10:28;  author: cpiazza;  state: Exp;  lines: +3 -3
Update with the new PORTNAME/PORTVERSION variables

v. 1.14
date: 2000/03/23 23:54:21;  author: jedgar;  state: Exp;  lines: +2 -2
Update MASTER_SITES and WWW to their new domain

PR:		17530
Submitted by:	KATO Tsuguru 

v. 1.13
date: 1999/12/25 01:33:11;  author: steve;  state: Exp;  lines: +3 -3
Update to version 2.0.

PR:		15666
Submitted by:	KATO Tsuguru 

v. 1.12
date: 1999/11/11 10:39:58;  author: tg;  state: Exp;  lines: +5 -5
Upgrade to 1.10.

PR:		14804
Submitted by:	KATO Tsuguru 

v. 1.11
date: 1999/10/07 21:20:34;  author: cpiazza;  state: Exp;  lines: +4 -5
Update to version 1.9

v. 1.10
date: 1999/09/06 19:56:31;  author: cpiazza;  state: Exp;  lines: +3 -3
Update to version 1.8

PR:		13602
Submitted by:	KATO Tsuguru 

v. 1.9
date: 1999/08/31 02:59:19;  author: peter;  state: Exp;  lines: +1 -1
$Id$ -> $FreeBSD$

v. 1.8
date: 1999/07/17 01:33:14;  author: cpiazza;  state: Exp;  lines: +4 -3
Update to gtkstep 1.6

v. 1.7
date: 1999/06/19 07:48:00;  author: cpiazza;  state: Exp;  lines: +2 -2
Remove current maintainer and replace with ports@FreeBSD.org
Maintainer writes:
  Sorry, but as Ive posted before, I can no longer maintain any of my
  ports, serving in the army is eating up all of my free time.

Requested by: Gilad Rom 

v. 1.6
date: 1999/05/29 04:25:56;  author: steve;  state: Exp;  lines: +8 -9
Update to version 1.5.

PR:		11850
Submitted by:	Jeremy Lea 

v. 1.5
date: 1999/04/22 06:49:17;  author: nectar;  state: Exp;  lines: +2 -2
Applications using imlib should also use gtk12 (as opposed to any
earlier version).

v. 1.4
date: 1999/03/15 18:30:06;  author: nectar;  state: Exp;  lines: +2 -2
Bump imlib library version since it now depends upon GTK 1.2 instead of 1.1.
	libgdk_imlib.so.2 -> libgdk_imlib.so.3
	libImlib.so.2     -> libImlib.so.3

v. 1.3
date: 1999/02/18 04:58:45;  author: vanilla;  state: Exp;  lines: +11 -15
Upgrade to 1.4, it's GTK theme module now, you need gtk11-devel & imlib,
and it doesn't work with gtk1.0.6.
Agree by:	maintainer

v. 1.2
date: 1998/12/10 13:18:16;  author: vanilla;  state: Exp;  lines: +2 -2
Correct MASTER_SITES.

v. 1.1
date: 1998/11/08 17:00:25;  author: eivind;  state: Exp;
branches:  1.1.1;
Initial revision

v. 1.1.1.1
date: 1998/11/08 17:00:25;  author: eivind;  state: Exp;  lines: +0 -0
Inital import of a GTKStep port.  This provides GTK with a NeXTstep-like
interface.

Submitted by:	Gilad Rom 
=============================================================================


v. 1.36
date: 2007/05/19 20:30:21;  author: flz;  state: Exp;  lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

v. 1.35
date: 2007/03/28 11:56:32;  author: pav;  state: Exp;  lines: +1 -0
- Fix after objformat removal

Reported by:	pointyhat

v. 1.34
date: 2006/10/14 08:53:58;  author: marcus;  state: Exp;  lines: +2 -3
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:	mezz, ahze, pav, and many others
Approved by:	portmgr (implicit, kris)

v. 1.33
date: 2006/05/13 05:00:29;  author: edwin;  state: Exp;  lines: +0 -1
Remove USE_REINPLACE from categories starting with X

v. 1.32
date: 2006/02/23 10:40:09;  author: ade;  state: Exp;  lines: +2 -2
Conversion to a single libtool environment.

Approved by:	portmgr (kris)

v. 1.31
date: 2005/11/15 06:51:54;  author: ade;  state: Exp;  lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

v. 1.30
date: 2005/06/03 20:18:10;  author: oliver;  state: Exp;  lines: +6 -1
change the libtool version to use from 1.3 to 1.5

v. 1.29
date: 2004/07/09 17:43:01;  author: marcus;  state: Exp;  lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:		63944
Based on work by:eik and marcus
Approved by:	ade (autotools maintainer)
Tested by:	kris on pointyhat
Bound to be hidden problems:	You bet

v. 1.28
date: 2004/06/02 09:13:45;  author: pav;  state: Exp;  lines: +1 -1
- Move to new category x11-themes.

PR:		ports/67478
Submitted by:	pav
Repocopy by:	marcus

v. 1.27
date: 2004/03/14 06:17:48;  author: ade;  state: Exp;  lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

	USE_LIBTOOL=YES		->	USE_LIBTOOL_VER=13
	USE_AUTOCONF=YES	->	USE_AUTOCONF_VER=213
	USE_AUTOMAKE=YES	->	USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

v. 1.26
date: 2004/02/04 05:10:07;  author: marcus;  state: Exp;  lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

v. 1.25
date: 2003/12/15 21:31:51;  author: krion;  state: Exp;  lines: +5 -1
- Fix MASTER_SITES
- Remove obsolete WWW: line

PR:		60274
Submitted by:	Ports Fury

v. 1.24
date: 2003/06/09 09:46:36;  author: erwin;  state: Exp;  lines: +1 -2
o Fix MASTER_SITES
o change in distinfo because the new distfile is a .tar.gz .
  but there is no change between both the old and new distfile.

PR:		53075
Submitted by:	Serge Gagnon 
Approved by:	edwin (mentor)

v. 1.23
date: 2003/04/20 19:54:02;  author: marcus;  state: Exp;  lines: +0 -1
Remove USE_GNOMENG.

v. 1.22
date: 2003/02/20 19:20:22;  author: knu;  state: Exp;  lines: +1 -0
De-pkg-comment.

v. 1.21
date: 2003/01/19 20:36:00;  author: sobomax;  state: Exp;  lines: +1 -1
Release to the wild.

v. 1.20
date: 2002/09/02 03:58:16;  author: lioux;  state: Exp;  lines: +2 -1
Deploy USE_GNOMENG infrastructure

PR:		42309
Submitted by:	Edwin Groothuis 

v. 1.19
date: 2001/04/09 08:03:32;  author: sobomax;  state: Exp;  lines: +2 -2
Update WWW and MASTER_SITES.

Submitted by:	FDS

v. 1.18
date: 2001/02/05 16:49:01;  author: olgeni;  state: Exp;  lines: +2 -2
Batch of style fixes for x11-toolkits.

v. 1.17
date: 2000/11/03 15:35:26;  author: sobomax;  state: Exp;  lines: +3 -3
- Update to 2.2;
- take over maintainership.

PR:		22424
Submitted by:	PF

v. 1.16
date: 2000/10/05 06:42:46;  author: reg;  state: Exp;  lines: +2 -6
Implement USE_GTK, part 2.

v. 1.15
date: 2000/04/10 01:10:28;  author: cpiazza;  state: Exp;  lines: +3 -3
Update with the new PORTNAME/PORTVERSION variables

v. 1.14
date: 2000/03/23 23:54:21;  author: jedgar;  state: Exp;  lines: +2 -2
Update MASTER_SITES and WWW to their new domain

PR:		17530
Submitted by:	KATO Tsuguru 

v. 1.13
date: 1999/12/25 01:33:11;  author: steve;  state: Exp;  lines: +3 -3
Update to version 2.0.

PR:		15666
Submitted by:	KATO Tsuguru 

v. 1.12
date: 1999/11/11 10:39:58;  author: tg;  state: Exp;  lines: +5 -5
Upgrade to 1.10.

PR:		14804
Submitted by:	KATO Tsuguru 

v. 1.11
date: 1999/10/07 21:20:34;  author: cpiazza;  state: Exp;  lines: +4 -5
Update to version 1.9

v. 1.10
date: 1999/09/06 19:56:31;  author: cpiazza;  state: Exp;  lines: +3 -3
Update to version 1.8

PR:		13602
Submitted by:	KATO Tsuguru 

v. 1.9
date: 1999/08/31 02:59:19;  author: peter;  state: Exp;  lines: +1 -1
$Id$ -> $FreeBSD$

v. 1.8
date: 1999/07/17 01:33:14;  author: cpiazza;  state: Exp;  lines: +4 -3
Update to gtkstep 1.6

v. 1.7
date: 1999/06/19 07:48:00;  author: cpiazza;  state: Exp;  lines: +2 -2
Remove current maintainer and replace with ports@FreeBSD.org
Maintainer writes:
  Sorry, but as Ive posted before, I can no longer maintain any of my
  ports, serving in the army is eating up all of my free time.

Requested by: Gilad Rom 

v. 1.6
date: 1999/05/29 04:25:56;  author: steve;  state: Exp;  lines: +8 -9
Update to version 1.5.

PR:		11850
Submitted by:	Jeremy Lea 

v. 1.5
date: 1999/04/22 06:49:17;  author: nectar;  state: Exp;  lines: +2 -2
Applications using imlib should also use gtk12 (as opposed to any
earlier version).

v. 1.4
date: 1999/03/15 18:30:06;  author: nectar;  state: Exp;  lines: +2 -2
Bump imlib library version since it now depends upon GTK 1.2 instead of 1.1.
	libgdk_imlib.so.2 -> libgdk_imlib.so.3
	libImlib.so.2     -> libImlib.so.3

v. 1.3
date: 1999/02/18 04:58:45;  author: vanilla;  state: Exp;  lines: +11 -15
Upgrade to 1.4, it's GTK theme module now, you need gtk11-devel & imlib,
and it doesn't work with gtk1.0.6.
Agree by:	maintainer

v. 1.2
date: 1998/12/10 13:18:16;  author: vanilla;  state: Exp;  lines: +2 -2
Correct MASTER_SITES.

v. 1.1
date: 1998/11/08 17:00:25;  author: eivind;  state: Exp;
branches:  1.1.1;
Initial revision

v. 1.1.1.1
date: 1998/11/08 17:00:25;  author: eivind;  state: Exp;  lines: +0 -0
Inital import of a GTKStep port.  This provides GTK with a NeXTstep-like
interface.

Submitted by:	Gilad Rom 
=============================================================================


v. 1.36
date: 2007/05/19 20:30:21;  author: flz;  state: Exp;  lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

v. 1.35
date: 2007/03/28 11:56:32;  author: pav;  state: Exp;  lines: +1 -0
- Fix after objformat removal

Reported by:	pointyhat

v. 1.34
date: 2006/10/14 08:53:58;  author: marcus;  state: Exp;  lines: +2 -3
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:	mezz, ahze, pav, and many others
Approved by:	portmgr (implicit, kris)

v. 1.33
date: 2006/05/13 05:00:29;  author: edwin;  state: Exp;  lines: +0 -1
Remove USE_REINPLACE from categories starting with X

v. 1.32
date: 2006/02/23 10:40:09;  author: ade;  state: Exp;  lines: +2 -2
Conversion to a single libtool environment.

Approved by:	portmgr (kris)

v. 1.31
date: 2005/11/15 06:51:54;  author: ade;  state: Exp;  lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

v. 1.30
date: 2005/06/03 20:18:10;  author: oliver;  state: Exp;  lines: +6 -1
change the libtool version to use from 1.3 to 1.5

v. 1.29
date: 2004/07/09 17:43:01;  author: marcus;  state: Exp;  lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:		63944
Based on work by:eik and marcus
Approved by:	ade (autotools maintainer)
Tested by:	kris on pointyhat
Bound to be hidden problems:	You bet

v. 1.28
date: 2004/06/02 09:13:45;  author: pav;  state: Exp;  lines: +1 -1
- Move to new category x11-themes.

PR:		ports/67478
Submitted by:	pav
Repocopy by:	marcus

v. 1.27
date: 2004/03/14 06:17:48;  author: ade;  state: Exp;  lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

	USE_LIBTOOL=YES		->	USE_LIBTOOL_VER=13
	USE_AUTOCONF=YES	->	USE_AUTOCONF_VER=213
	USE_AUTOMAKE=YES	->	USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

v. 1.26
date: 2004/02/04 05:10:07;  author: marcus;  state: Exp;  lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

v. 1.25
date: 2003/12/15 21:31:51;  author: krion;  state: Exp;  lines: +5 -1
- Fix MASTER_SITES
- Remove obsolete WWW: line

PR:		60274
Submitted by:	Ports Fury

v. 1.24
date: 2003/06/09 09:46:36;  author: erwin;  state: Exp;  lines: +1 -2
o Fix MASTER_SITES
o change in distinfo because the new distfile is a .tar.gz .
  but there is no change between both the old and new distfile.

PR:		53075
Submitted by:	Serge Gagnon 
Approved by:	edwin (mentor)

v. 1.23
date: 2003/04/20 19:54:02;  author: marcus;  state: Exp;  lines: +0 -1
Remove USE_GNOMENG.

v. 1.22
date: 2003/02/20 19:20:22;  author: knu;  state: Exp;  lines: +1 -0
De-pkg-comment.

v. 1.21
date: 2003/01/19 20:36:00;  author: sobomax;  state: Exp;  lines: +1 -1
Release to the wild.

v. 1.20
date: 2002/09/02 03:58:16;  author: lioux;  state: Exp;  lines: +2 -1
Deploy USE_GNOMENG infrastructure

PR:		42309
Submitted by:	Edwin Groothuis 

v. 1.19
date: 2001/04/09 08:03:32;  author: sobomax;  state: Exp;  lines: +2 -2
Update WWW and MASTER_SITES.

Submitted by:	FDS

v. 1.18
date: 2001/02/05 16:49:01;  author: olgeni;  state: Exp;  lines: +2 -2
Batch of style fixes for x11-toolkits.

v. 1.17
date: 2000/11/03 15:35:26;  author: sobomax;  state: Exp;  lines: +3 -3
- Update to 2.2;
- take over maintainership.

PR:		22424
Submitted by:	PF

v. 1.16
date: 2000/10/05 06:42:46;  author: reg;  state: Exp;  lines: +2 -6
Implement USE_GTK, part 2.

v. 1.15
date: 2000/04/10 01:10:28;  author: cpiazza;  state: Exp;  lines: +3 -3
Update with the new PORTNAME/PORTVERSION variables

v. 1.14
date: 2000/03/23 23:54:21;  author: jedgar;  state: Exp;  lines: +2 -2
Update MASTER_SITES and WWW to their new domain

PR:		17530
Submitted by:	KATO Tsuguru 

v. 1.13
date: 1999/12/25 01:33:11;  author: steve;  state: Exp;  lines: +3 -3
Update to version 2.0.

PR:		15666
Submitted by:	KATO Tsuguru 

v. 1.12
date: 1999/11/11 10:39:58;  author: tg;  state: Exp;  lines: +5 -5
Upgrade to 1.10.

PR:		14804
Submitted by:	KATO Tsuguru 

v. 1.11
date: 1999/10/07 21:20:34;  author: cpiazza;  state: Exp;  lines: +4 -5
Update to version 1.9

v. 1.10
date: 1999/09/06 19:56:31;  author: cpiazza;  state: Exp;  lines: +3 -3
Update to version 1.8

PR:		13602
Submitted by:	KATO Tsuguru 

v. 1.9
date: 1999/08/31 02:59:19;  author: peter;  state: Exp;  lines: +1 -1
$Id$ -> $FreeBSD$

v. 1.8
date: 1999/07/17 01:33:14;  author: cpiazza;  state: Exp;  lines: +4 -3
Update to gtkstep 1.6

v. 1.7
date: 1999/06/19 07:48:00;  author: cpiazza;  state: Exp;  lines: +2 -2
Remove current maintainer and replace with ports@FreeBSD.org
Maintainer writes:
  Sorry, but as Ive posted before, I can no longer maintain any of my
  ports, serving in the army is eating up all of my free time.

Requested by: Gilad Rom 

v. 1.6
date: 1999/05/29 04:25:56;  author: steve;  state: Exp;  lines: +8 -9
Update to version 1.5.

PR:		11850
Submitted by:	Jeremy Lea 

v. 1.5
date: 1999/04/22 06:49:17;  author: nectar;  state: Exp;  lines: +2 -2
Applications using imlib should also use gtk12 (as opposed to any
earlier version).

v. 1.4
date: 1999/03/15 18:30:06;  author: nectar;  state: Exp;  lines: +2 -2
Bump imlib library version since it now depends upon GTK 1.2 instead of 1.1.
	libgdk_imlib.so.2 -> libgdk_imlib.so.3
	libImlib.so.2     -> libImlib.so.3

v. 1.3
date: 1999/02/18 04:58:45;  author: vanilla;  state: Exp;  lines: +11 -15
Upgrade to 1.4, it's GTK theme module now, you need gtk11-devel & imlib,
and it doesn't work with gtk1.0.6.
Agree by:	maintainer

v. 1.2
date: 1998/12/10 13:18:16;  author: vanilla;  state: Exp;  lines: +2 -2
Correct MASTER_SITES.

v. 1.1
date: 1998/11/08 17:00:25;  author: eivind;  state: Exp;
branches:  1.1.1;
Initial revision

v. 1.1.1.1
date: 1998/11/08 17:00:25;  author: eivind;  state: Exp;  lines: +0 -0
Inital import of a GTKStep port.  This provides GTK with a NeXTstep-like
interface.

Submitted by:	Gilad Rom 
=============================================================================