The FreeBSD Ports Archive
FreeBSD x11-clocks  : xdaliclock
A rather neat animated clock
This is a neat program which ``morphs'' each of the digits into the
next in the sequence to update the time. Good processor hog for all you
P90 owners.
http://www.jwz.org/xdaliclock/
|
xdaliclock history
v. 1.33
date: 2007/07/23 09:36:47; author: rafan; state: Exp; lines: +1 -1
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
v. 1.32
date: 2007/06/07 07:09:33; author: miwi; state: Exp; lines: +3 -4
- Update to 2.24
PR: 113418
Submitted by: Wesley Shields (maintainer)
v. 1.31
date: 2007/05/19 20:28:34; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.30
date: 2006/08/19 16:49:48; author: miwi; state: Exp; lines: +1 -1
- Update maintainer addresses
PR: ports/102230
Submitted by: Wesley Shields
Approved by: krion (mentor)
v. 1.29
date: 2006/04/04 17:27:37; author: pav; state: Exp; lines: +1 -1
- Update to 2.23
PR: ports/95107
Submitted by: Wesley Shields (maintainer)
v. 1.28
date: 2006/01/07 01:00:50; author: edwin; state: Exp; lines: +1 -1
[UPDATE]: x11-clocks/xdaliclock
x11-clocks/xdaliclock is out of date and without a maintainer.
The attached patch updates the port and sets myself as the
maintainer.
(well, sets the maintainer to start with, port was updated yesterday)
PR: ports/91431
Submitted by: Wesley Shields
v. 1.27
date: 2006/01/05 21:37:38; author: edwin; state: Exp; lines: +1 -1
Update to 2.22
v. 1.26
date: 2005/11/27 03:30:55; author: linimon; state: Exp; lines: +1 -2
None of the XCONTRIB sites have recent versions of this distfile.
v. 1.25
date: 2005/04/12 03:26:52; author: obrien; state: Exp; lines: +1 -1
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
v. 1.24
date: 2005/04/11 08:04:33; author: obrien; state: Exp; lines: +1 -1
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
v. 1.23
date: 2004/02/05 20:38:01; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES.
Reviewed by: marcus
v. 1.22
date: 2003/09/10 10:46:33; author: glewis; state: Exp; lines: +5 -6
. Update to 2.20.
PR: 56635
Submitted by: Ports Fury
v. 1.21
date: 2003/06/12 02:10:00; author: will; state: Exp; lines: +1 -1
gpalmer left us a while ago, revert these ports to ports@ MAINTAINER.
v. 1.20
date: 2003/05/02 07:06:05; author: glewis; state: Exp; lines: +1 -1
. Update to 2.19.
Approved by: maintainer timeout
v. 1.19
date: 2003/03/07 06:12:26; author: ade; state: Exp; lines: +2 -1
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.18
date: 2001/02/05 17:05:29; author: olgeni; state: Exp; lines: +2 -2
Style fixes for x11-clocks.
v. 1.17
date: 2000/04/10 00:33:06; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variables
v. 1.16
date: 2000/01/29 20:12:55; author: gpalmer; state: Exp; lines: +9 -4
Upgrade to 2.18. Apparently has a minor Y2K bugfix. The palm code
distributed in the tarball to be built isn't being built, just the
X11 code.
v. 1.15
date: 1999/10/31 23:59:32; author: gpalmer; state: Exp; lines: +3 -3
Update to 2.14
PR: 14557
v. 1.14
date: 1999/08/31 06:52:32; author: mharo; state: Exp; lines: +2 -2
FreeBSD.ORG -> FreeBSD.org
Prompted by PR: 13476, 13477
Submitted by: KATO Tsuguru
v. 1.13
date: 1999/08/31 02:58:09; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.12
date: 1999/01/01 22:45:52; author: gpalmer; state: Exp; lines: +2 -2
Whoops. Bump the `required version' field also.
v. 1.11
date: 1999/01/01 22:43:44; author: gpalmer; state: Exp; lines: +4 -3
Update to 2.13
Prompted by: Kris Kennaway
v. 1.10
date: 1998/09/22 22:32:14; author: asami; state: Exp; lines: +2 -2
Category name is "x11-clocks", not "x11-clock". ;)
Pointed out by: steve
v. 1.9
date: 1998/09/21 01:39:11; author: steve; state: Exp; lines: +2 -1
Make these build in an ELF world and use MAN1 for manpages.
v. 1.8
date: 1998/08/07 22:28:05; author: asami; state: Exp; lines: +2 -2
Move "xtimer" from misc to x11-clocks and "asclock bclock dclock
emiclock mlclock mouseclock rclock swisswatch t3d wmtime xalarm
xdaliclock" from x11 to x11-clocks.
v. 1.7
date: 1998/02/18 18:08:23; author: vanilla; state: Exp; lines: +3 -3
Upgrade to 2.11.
v. 1.6
date: 1997/11/20 09:01:09; author: gpalmer; state: Exp; lines: +3 -4
Update to 2.10
v. 1.5
date: 1996/11/30 01:30:03; author: torstenb; state: Exp; lines: +3 -3
Upgrade to 2.08
v. 1.4
date: 1996/11/18 09:56:07; author: asami; state: Exp; lines: +4 -3
Use MASTER_SITE_XCONTRIB. Use MAN? macros. CATEGORIES+= -> CATEGORIES.
v. 1.3
date: 1995/04/12 20:31:51; author: asami; state: Exp; lines: +5 -3
And now the rest of the x11 ports Makefiles.
v. 1.2
date: 1995/04/01 12:51:18; author: jkh; state: Exp; lines: +2 -1
Add CATEGORIES lines to a whole bunch of port Makefiles. Some ports are in
multiple catagories - I'll expect the various MAINTAINERS to make further
adjustments (and add any KEYWORDS lines) themselves.
v. 1.1
date: 1995/02/10 23:32:42; author: gpalmer; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1995/02/10 23:32:43; author: gpalmer; state: Exp; lines: +0 -0
I'm afraid I couldn't hold off any longer. Yes, a port of XDaliClock :-)
=============================================================================
v. 1.33
date: 2007/07/23 09:36:47; author: rafan; state: Exp; lines: +1 -1
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
v. 1.32
date: 2007/06/07 07:09:33; author: miwi; state: Exp; lines: +3 -4
- Update to 2.24
PR: 113418
Submitted by: Wesley Shields (maintainer)
v. 1.31
date: 2007/05/19 20:28:34; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.30
date: 2006/08/19 16:49:48; author: miwi; state: Exp; lines: +1 -1
- Update maintainer addresses
PR: ports/102230
Submitted by: Wesley Shields
Approved by: krion (mentor)
v. 1.29
date: 2006/04/04 17:27:37; author: pav; state: Exp; lines: +1 -1
- Update to 2.23
PR: ports/95107
Submitted by: Wesley Shields (maintainer)
v. 1.28
date: 2006/01/07 01:00:50; author: edwin; state: Exp; lines: +1 -1
[UPDATE]: x11-clocks/xdaliclock
x11-clocks/xdaliclock is out of date and without a maintainer.
The attached patch updates the port and sets myself as the
maintainer.
(well, sets the maintainer to start with, port was updated yesterday)
PR: ports/91431
Submitted by: Wesley Shields
v. 1.27
date: 2006/01/05 21:37:38; author: edwin; state: Exp; lines: +1 -1
Update to 2.22
v. 1.26
date: 2005/11/27 03:30:55; author: linimon; state: Exp; lines: +1 -2
None of the XCONTRIB sites have recent versions of this distfile.
v. 1.25
date: 2005/04/12 03:26:52; author: obrien; state: Exp; lines: +1 -1
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
v. 1.24
date: 2005/04/11 08:04:33; author: obrien; state: Exp; lines: +1 -1
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
v. 1.23
date: 2004/02/05 20:38:01; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES.
Reviewed by: marcus
v. 1.22
date: 2003/09/10 10:46:33; author: glewis; state: Exp; lines: +5 -6
. Update to 2.20.
PR: 56635
Submitted by: Ports Fury
v. 1.21
date: 2003/06/12 02:10:00; author: will; state: Exp; lines: +1 -1
gpalmer left us a while ago, revert these ports to ports@ MAINTAINER.
v. 1.20
date: 2003/05/02 07:06:05; author: glewis; state: Exp; lines: +1 -1
. Update to 2.19.
Approved by: maintainer timeout
v. 1.19
date: 2003/03/07 06:12:26; author: ade; state: Exp; lines: +2 -1
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.18
date: 2001/02/05 17:05:29; author: olgeni; state: Exp; lines: +2 -2
Style fixes for x11-clocks.
v. 1.17
date: 2000/04/10 00:33:06; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variables
v. 1.16
date: 2000/01/29 20:12:55; author: gpalmer; state: Exp; lines: +9 -4
Upgrade to 2.18. Apparently has a minor Y2K bugfix. The palm code
distributed in the tarball to be built isn't being built, just the
X11 code.
v. 1.15
date: 1999/10/31 23:59:32; author: gpalmer; state: Exp; lines: +3 -3
Update to 2.14
PR: 14557
v. 1.14
date: 1999/08/31 06:52:32; author: mharo; state: Exp; lines: +2 -2
FreeBSD.ORG -> FreeBSD.org
Prompted by PR: 13476, 13477
Submitted by: KATO Tsuguru
v. 1.13
date: 1999/08/31 02:58:09; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.12
date: 1999/01/01 22:45:52; author: gpalmer; state: Exp; lines: +2 -2
Whoops. Bump the `required version' field also.
v. 1.11
date: 1999/01/01 22:43:44; author: gpalmer; state: Exp; lines: +4 -3
Update to 2.13
Prompted by: Kris Kennaway
v. 1.10
date: 1998/09/22 22:32:14; author: asami; state: Exp; lines: +2 -2
Category name is "x11-clocks", not "x11-clock". ;)
Pointed out by: steve
v. 1.9
date: 1998/09/21 01:39:11; author: steve; state: Exp; lines: +2 -1
Make these build in an ELF world and use MAN1 for manpages.
v. 1.8
date: 1998/08/07 22:28:05; author: asami; state: Exp; lines: +2 -2
Move "xtimer" from misc to x11-clocks and "asclock bclock dclock
emiclock mlclock mouseclock rclock swisswatch t3d wmtime xalarm
xdaliclock" from x11 to x11-clocks.
v. 1.7
date: 1998/02/18 18:08:23; author: vanilla; state: Exp; lines: +3 -3
Upgrade to 2.11.
v. 1.6
date: 1997/11/20 09:01:09; author: gpalmer; state: Exp; lines: +3 -4
Update to 2.10
v. 1.5
date: 1996/11/30 01:30:03; author: torstenb; state: Exp; lines: +3 -3
Upgrade to 2.08
v. 1.4
date: 1996/11/18 09:56:07; author: asami; state: Exp; lines: +4 -3
Use MASTER_SITE_XCONTRIB. Use MAN? macros. CATEGORIES+= -> CATEGORIES.
v. 1.3
date: 1995/04/12 20:31:51; author: asami; state: Exp; lines: +5 -3
And now the rest of the x11 ports Makefiles.
v. 1.2
date: 1995/04/01 12:51:18; author: jkh; state: Exp; lines: +2 -1
Add CATEGORIES lines to a whole bunch of port Makefiles. Some ports are in
multiple catagories - I'll expect the various MAINTAINERS to make further
adjustments (and add any KEYWORDS lines) themselves.
v. 1.1
date: 1995/02/10 23:32:42; author: gpalmer; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1995/02/10 23:32:43; author: gpalmer; state: Exp; lines: +0 -0
I'm afraid I couldn't hold off any longer. Yes, a port of XDaliClock :-)
=============================================================================
v. 1.33
date: 2007/07/23 09:36:47; author: rafan; state: Exp; lines: +1 -1
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
v. 1.32
date: 2007/06/07 07:09:33; author: miwi; state: Exp; lines: +3 -4
- Update to 2.24
PR: 113418
Submitted by: Wesley Shields (maintainer)
v. 1.31
date: 2007/05/19 20:28:34; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.30
date: 2006/08/19 16:49:48; author: miwi; state: Exp; lines: +1 -1
- Update maintainer addresses
PR: ports/102230
Submitted by: Wesley Shields
Approved by: krion (mentor)
v. 1.29
date: 2006/04/04 17:27:37; author: pav; state: Exp; lines: +1 -1
- Update to 2.23
PR: ports/95107
Submitted by: Wesley Shields (maintainer)
v. 1.28
date: 2006/01/07 01:00:50; author: edwin; state: Exp; lines: +1 -1
[UPDATE]: x11-clocks/xdaliclock
x11-clocks/xdaliclock is out of date and without a maintainer.
The attached patch updates the port and sets myself as the
maintainer.
(well, sets the maintainer to start with, port was updated yesterday)
PR: ports/91431
Submitted by: Wesley Shields
v. 1.27
date: 2006/01/05 21:37:38; author: edwin; state: Exp; lines: +1 -1
Update to 2.22
v. 1.26
date: 2005/11/27 03:30:55; author: linimon; state: Exp; lines: +1 -2
None of the XCONTRIB sites have recent versions of this distfile.
v. 1.25
date: 2005/04/12 03:26:52; author: obrien; state: Exp; lines: +1 -1
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
v. 1.24
date: 2005/04/11 08:04:33; author: obrien; state: Exp; lines: +1 -1
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
v. 1.23
date: 2004/02/05 20:38:01; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES.
Reviewed by: marcus
v. 1.22
date: 2003/09/10 10:46:33; author: glewis; state: Exp; lines: +5 -6
. Update to 2.20.
PR: 56635
Submitted by: Ports Fury
v. 1.21
date: 2003/06/12 02:10:00; author: will; state: Exp; lines: +1 -1
gpalmer left us a while ago, revert these ports to ports@ MAINTAINER.
v. 1.20
date: 2003/05/02 07:06:05; author: glewis; state: Exp; lines: +1 -1
. Update to 2.19.
Approved by: maintainer timeout
v. 1.19
date: 2003/03/07 06:12:26; author: ade; state: Exp; lines: +2 -1
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.18
date: 2001/02/05 17:05:29; author: olgeni; state: Exp; lines: +2 -2
Style fixes for x11-clocks.
v. 1.17
date: 2000/04/10 00:33:06; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variables
v. 1.16
date: 2000/01/29 20:12:55; author: gpalmer; state: Exp; lines: +9 -4
Upgrade to 2.18. Apparently has a minor Y2K bugfix. The palm code
distributed in the tarball to be built isn't being built, just the
X11 code.
v. 1.15
date: 1999/10/31 23:59:32; author: gpalmer; state: Exp; lines: +3 -3
Update to 2.14
PR: 14557
v. 1.14
date: 1999/08/31 06:52:32; author: mharo; state: Exp; lines: +2 -2
FreeBSD.ORG -> FreeBSD.org
Prompted by PR: 13476, 13477
Submitted by: KATO Tsuguru
v. 1.13
date: 1999/08/31 02:58:09; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.12
date: 1999/01/01 22:45:52; author: gpalmer; state: Exp; lines: +2 -2
Whoops. Bump the `required version' field also.
v. 1.11
date: 1999/01/01 22:43:44; author: gpalmer; state: Exp; lines: +4 -3
Update to 2.13
Prompted by: Kris Kennaway
v. 1.10
date: 1998/09/22 22:32:14; author: asami; state: Exp; lines: +2 -2
Category name is "x11-clocks", not "x11-clock". ;)
Pointed out by: steve
v. 1.9
date: 1998/09/21 01:39:11; author: steve; state: Exp; lines: +2 -1
Make these build in an ELF world and use MAN1 for manpages.
v. 1.8
date: 1998/08/07 22:28:05; author: asami; state: Exp; lines: +2 -2
Move "xtimer" from misc to x11-clocks and "asclock bclock dclock
emiclock mlclock mouseclock rclock swisswatch t3d wmtime xalarm
xdaliclock" from x11 to x11-clocks.
v. 1.7
date: 1998/02/18 18:08:23; author: vanilla; state: Exp; lines: +3 -3
Upgrade to 2.11.
v. 1.6
date: 1997/11/20 09:01:09; author: gpalmer; state: Exp; lines: +3 -4
Update to 2.10
v. 1.5
date: 1996/11/30 01:30:03; author: torstenb; state: Exp; lines: +3 -3
Upgrade to 2.08
v. 1.4
date: 1996/11/18 09:56:07; author: asami; state: Exp; lines: +4 -3
Use MASTER_SITE_XCONTRIB. Use MAN? macros. CATEGORIES+= -> CATEGORIES.
v. 1.3
date: 1995/04/12 20:31:51; author: asami; state: Exp; lines: +5 -3
And now the rest of the x11 ports Makefiles.
v. 1.2
date: 1995/04/01 12:51:18; author: jkh; state: Exp; lines: +2 -1
Add CATEGORIES lines to a whole bunch of port Makefiles. Some ports are in
multiple catagories - I'll expect the various MAINTAINERS to make further
adjustments (and add any KEYWORDS lines) themselves.
v. 1.1
date: 1995/02/10 23:32:42; author: gpalmer; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1995/02/10 23:32:43; author: gpalmer; state: Exp; lines: +0 -0
I'm afraid I couldn't hold off any longer. Yes, a port of XDaliClock :-)
=============================================================================
|
| |
|