The FreeBSD Ports Archive
FreeBSD x11-clocks  : asclock
Afterstep clock with some language extensions
afterstep clock with some language extensions
|
asclock history
v. 1.21
date: 2007/05/19 20:28:24; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.20
date: 2006/12/30 15:08:20; author: garga; state: Exp; lines: +2 -0
Register CONFLICTS with asclock-gtk and asclock-xlib
Approved by: dinoex (maintainer)
v. 1.19
date: 2006/10/31 15:55:55; author: dinoex; state: Exp; lines: +1 -1
- take MAINTAINERSHIP
v. 1.18
date: 2004/03/10 22:47:25; author: glewis; state: Exp; lines: +1 -1
. Fix a typo in COMMENT.
v. 1.17
date: 2004/02/05 20:38:00; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES.
Reviewed by: marcus
v. 1.16
date: 2003/11/03 01:19:25; author: kris; state: Exp; lines: +1 -1
Reset maintainer on ports owned by the following committers who have
been inactive for over 12 months and did not respond to my email confirming
their status: keith, nakai, torstenb
Reviewed by: portmgr
v. 1.15
date: 2003/03/07 06:12:23; author: ade; state: Exp; lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.14
date: 2002/01/29 12:14:13; author: knu; state: Exp; lines: +2 -2
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;
the ECHO macro is set to "echo" by default, but it is set to "true" if
make(1) is invoked with the -s option while ECHO_CMD is always set to
the echo command.
v. 1.13
date: 2001/02/05 17:05:19; author: olgeni; state: Exp; lines: +3 -3
Style fixes for x11-clocks.
v. 1.12
date: 2000/08/03 09:26:50; author: asami; state: Exp; lines: +2 -3
(1) Add new variable, XFREE86_VERSION, to specify which version of
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
v. 1.11
date: 2000/04/16 04:14:01; author: asami; state: Exp; lines: +2 -2
DISTNAMe-related cleanups.
v. 1.10
date: 2000/04/10 00:32:23; author: cpiazza; state: Exp; lines: +4 -4
Update with the new PORTNAME/PORTVERSION variables
v. 1.9
date: 2000/01/08 11:23:57; author: nakai; state: Exp; lines: +2 -2
Change MAINTAINER address from nacai@iname.com to nakai@FreeBSD.org
v. 1.8
date: 1999/08/31 02:57:53; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.7
date: 1999/01/18 06:38:07; author: asami; state: Exp; lines: +2 -2
Add "afterstep" virtual category.
v. 1.6
date: 1999/01/12 16:50:21; author: vanilla; state: Exp; lines: +2 -2
Change maitainer's email address,
and BROKEN some gnome ports until I upgrade it.
v. 1.5
date: 1998/11/29 12:43:11; author: asami; state: Exp; lines: +3 -1
More missing dependencies.
v. 1.4
date: 1998/09/22 22:32:03; author: asami; state: Exp; lines: +2 -2
Category name is "x11-clocks", not "x11-clock". ;)
Pointed out by: steve
v. 1.3
date: 1998/09/21 01:38:42; author: steve; state: Exp; lines: +2 -1
Make these build in an ELF world and use MAN1 for manpages.
v. 1.2
date: 1998/08/07 22:28:02; author: asami; state: Exp; lines: +2 -2
Move "xtimer" from misc to x11-clocks and "asclock bclock dclock
emiclock mlclock mouseclock rclock swisswatch t3d wmtime xalarm
xdaliclock" from x11 to x11-clocks.
v. 1.1
date: 1997/11/04 09:03:01; author: tg; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1997/11/04 09:03:01; author: tg; state: Exp; lines: +0 -0
Import asclock port. Yet another digital clock for X11 for
people who like the afterstep look.
PR: 4277
Submitted by: Yukihiro Nakai
=============================================================================
v. 1.21
date: 2007/05/19 20:28:24; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.20
date: 2006/12/30 15:08:20; author: garga; state: Exp; lines: +2 -0
Register CONFLICTS with asclock-gtk and asclock-xlib
Approved by: dinoex (maintainer)
v. 1.19
date: 2006/10/31 15:55:55; author: dinoex; state: Exp; lines: +1 -1
- take MAINTAINERSHIP
v. 1.18
date: 2004/03/10 22:47:25; author: glewis; state: Exp; lines: +1 -1
. Fix a typo in COMMENT.
v. 1.17
date: 2004/02/05 20:38:00; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES.
Reviewed by: marcus
v. 1.16
date: 2003/11/03 01:19:25; author: kris; state: Exp; lines: +1 -1
Reset maintainer on ports owned by the following committers who have
been inactive for over 12 months and did not respond to my email confirming
their status: keith, nakai, torstenb
Reviewed by: portmgr
v. 1.15
date: 2003/03/07 06:12:23; author: ade; state: Exp; lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.14
date: 2002/01/29 12:14:13; author: knu; state: Exp; lines: +2 -2
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;
the ECHO macro is set to "echo" by default, but it is set to "true" if
make(1) is invoked with the -s option while ECHO_CMD is always set to
the echo command.
v. 1.13
date: 2001/02/05 17:05:19; author: olgeni; state: Exp; lines: +3 -3
Style fixes for x11-clocks.
v. 1.12
date: 2000/08/03 09:26:50; author: asami; state: Exp; lines: +2 -3
(1) Add new variable, XFREE86_VERSION, to specify which version of
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
v. 1.11
date: 2000/04/16 04:14:01; author: asami; state: Exp; lines: +2 -2
DISTNAMe-related cleanups.
v. 1.10
date: 2000/04/10 00:32:23; author: cpiazza; state: Exp; lines: +4 -4
Update with the new PORTNAME/PORTVERSION variables
v. 1.9
date: 2000/01/08 11:23:57; author: nakai; state: Exp; lines: +2 -2
Change MAINTAINER address from nacai@iname.com to nakai@FreeBSD.org
v. 1.8
date: 1999/08/31 02:57:53; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.7
date: 1999/01/18 06:38:07; author: asami; state: Exp; lines: +2 -2
Add "afterstep" virtual category.
v. 1.6
date: 1999/01/12 16:50:21; author: vanilla; state: Exp; lines: +2 -2
Change maitainer's email address,
and BROKEN some gnome ports until I upgrade it.
v. 1.5
date: 1998/11/29 12:43:11; author: asami; state: Exp; lines: +3 -1
More missing dependencies.
v. 1.4
date: 1998/09/22 22:32:03; author: asami; state: Exp; lines: +2 -2
Category name is "x11-clocks", not "x11-clock". ;)
Pointed out by: steve
v. 1.3
date: 1998/09/21 01:38:42; author: steve; state: Exp; lines: +2 -1
Make these build in an ELF world and use MAN1 for manpages.
v. 1.2
date: 1998/08/07 22:28:02; author: asami; state: Exp; lines: +2 -2
Move "xtimer" from misc to x11-clocks and "asclock bclock dclock
emiclock mlclock mouseclock rclock swisswatch t3d wmtime xalarm
xdaliclock" from x11 to x11-clocks.
v. 1.1
date: 1997/11/04 09:03:01; author: tg; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1997/11/04 09:03:01; author: tg; state: Exp; lines: +0 -0
Import asclock port. Yet another digital clock for X11 for
people who like the afterstep look.
PR: 4277
Submitted by: Yukihiro Nakai
=============================================================================
v. 1.21
date: 2007/05/19 20:28:24; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.20
date: 2006/12/30 15:08:20; author: garga; state: Exp; lines: +2 -0
Register CONFLICTS with asclock-gtk and asclock-xlib
Approved by: dinoex (maintainer)
v. 1.19
date: 2006/10/31 15:55:55; author: dinoex; state: Exp; lines: +1 -1
- take MAINTAINERSHIP
v. 1.18
date: 2004/03/10 22:47:25; author: glewis; state: Exp; lines: +1 -1
. Fix a typo in COMMENT.
v. 1.17
date: 2004/02/05 20:38:00; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES.
Reviewed by: marcus
v. 1.16
date: 2003/11/03 01:19:25; author: kris; state: Exp; lines: +1 -1
Reset maintainer on ports owned by the following committers who have
been inactive for over 12 months and did not respond to my email confirming
their status: keith, nakai, torstenb
Reviewed by: portmgr
v. 1.15
date: 2003/03/07 06:12:23; author: ade; state: Exp; lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.14
date: 2002/01/29 12:14:13; author: knu; state: Exp; lines: +2 -2
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;
the ECHO macro is set to "echo" by default, but it is set to "true" if
make(1) is invoked with the -s option while ECHO_CMD is always set to
the echo command.
v. 1.13
date: 2001/02/05 17:05:19; author: olgeni; state: Exp; lines: +3 -3
Style fixes for x11-clocks.
v. 1.12
date: 2000/08/03 09:26:50; author: asami; state: Exp; lines: +2 -3
(1) Add new variable, XFREE86_VERSION, to specify which version of
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
v. 1.11
date: 2000/04/16 04:14:01; author: asami; state: Exp; lines: +2 -2
DISTNAMe-related cleanups.
v. 1.10
date: 2000/04/10 00:32:23; author: cpiazza; state: Exp; lines: +4 -4
Update with the new PORTNAME/PORTVERSION variables
v. 1.9
date: 2000/01/08 11:23:57; author: nakai; state: Exp; lines: +2 -2
Change MAINTAINER address from nacai@iname.com to nakai@FreeBSD.org
v. 1.8
date: 1999/08/31 02:57:53; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.7
date: 1999/01/18 06:38:07; author: asami; state: Exp; lines: +2 -2
Add "afterstep" virtual category.
v. 1.6
date: 1999/01/12 16:50:21; author: vanilla; state: Exp; lines: +2 -2
Change maitainer's email address,
and BROKEN some gnome ports until I upgrade it.
v. 1.5
date: 1998/11/29 12:43:11; author: asami; state: Exp; lines: +3 -1
More missing dependencies.
v. 1.4
date: 1998/09/22 22:32:03; author: asami; state: Exp; lines: +2 -2
Category name is "x11-clocks", not "x11-clock". ;)
Pointed out by: steve
v. 1.3
date: 1998/09/21 01:38:42; author: steve; state: Exp; lines: +2 -1
Make these build in an ELF world and use MAN1 for manpages.
v. 1.2
date: 1998/08/07 22:28:02; author: asami; state: Exp; lines: +2 -2
Move "xtimer" from misc to x11-clocks and "asclock bclock dclock
emiclock mlclock mouseclock rclock swisswatch t3d wmtime xalarm
xdaliclock" from x11 to x11-clocks.
v. 1.1
date: 1997/11/04 09:03:01; author: tg; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1997/11/04 09:03:01; author: tg; state: Exp; lines: +0 -0
Import asclock port. Yet another digital clock for X11 for
people who like the afterstep look.
PR: 4277
Submitted by: Yukihiro Nakai
=============================================================================
|
| |
|