The FreeBSD Ports Archive

Freebsd | Contact
Welcome to FreeBSD Software


FreeBSD sysutils : mbmon

 This is a X/tty motherboard monitor which supports LM78/79, WINBond
83781D/83782D/83783S, ASUS 991227F, and VIA VT82C686A/B PC-health
chips via 3 methods: ISA-I/O, SMBus, VIA-direct.

Run "mbmon -h" or "xmbmon -help" to see the usage.

***CAUTION*** 

These programs access to the SMBus or the ISA-IO port directly under
the superuser privilege, so it may cause a system crash.  Please test
"mbmon -d" or "xmbmon -debug" first. 

http://www.nt.phys.kyushu-u.ac.jp/shimizu/download/download.html



mbmon history


v. 1.24
date: 2007/09/24 05:18:45;  author: edwin;  state: Exp;  lines: +1 -1
[PATCH] sysutils/mbmon - enables recognition of 657DHG controller

	Enclosed one line patch enables mbmon's recognition of the 657DHG
	temp sensing device on the Asus P5x motherboard series

PR:		ports/116474
Submitted by:	Howard Goldstein 
Approved by:	maintainer timeout

v. 1.23 date: 2006/05/03 19:46:55; author: jylefort; state: Exp; lines: +1 -1 Call fflush() after printing sensor values. This allows to use mbmon in scripts, etc.
v. 1.22 date: 2006/05/03 17:32:38; author: jylefort; state: Exp; lines: +1 -1 Recognize a Winbond chip on the MSI Neo4-FI motherboard. PR: ports/96718 Submitted by: pav
v. 1.21 date: 2006/03/19 02:24:29; author: jylefort; state: Exp; lines: +5 -1 Add a rcng startup script for the daemon mode. PR: ports/94610 Submitted by: Douglas K. Rand
v. 1.20 date: 2006/02/01 20:05:08; author: jylefort; state: Exp; lines: +18 -32 - Split into two ports: mbmon (tty) and xmbmon (X) - Remove -s from LDFLAGS (do not unconditionally strip, let ${INSTALL_PROGRAM} do it) - Use OPTIONS - Decouple manpage installation from NOPORTDOCS - xmbmon: - use X prefix - install xmbmon.resources into the appropriate location - do not require a font package: use fixed rather than Helvetica [1] - Take maintainership [1]: PR: ports/92600 Submitted by: Daniel Berlin
v. 1.19 date: 2005/12/30 22:12:13; author: ru; state: Exp; lines: +5 -1 Allow to compile without smb(4) support.
v. 1.18 date: 2005/12/30 21:33:17; author: ru; state: Exp; lines: +1 -1 - Process the -P option when compiled with smb(4) support. - Add PCI IDs for both SMBus controllers of AMD-8111. NB: The non-smb(4) access to the AMD-8111 SMBus 2.0 controller is broken -- should use EC, like our amdsmb.c driver does.
v. 1.17 date: 2005/12/21 14:03:54; author: ru; state: Exp; lines: +1 -1 Fix reading temperature and voltage from ADM1027 sensors: - Don't add offsets, they are added automatically by the chip. - Make sure to read all registers with MSBs after reading from the extended resoltion register, otherwise they stay locked. This makes mbmon actually work on Asus S2882-D Opteron server motherboards with the ADM1027 chip, using amdpm(4) + smb(4). (Except it doesn't show the 4th FAN RPM counter; fix not committed at this time.) In collaboration with: Vsevolod Lobko
v. 1.16 date: 2005/12/16 16:23:40; author: ru; state: Exp; lines: +1 -1 - Enable smb(4) support (on amd64 and i386 for now). - Fix PCI ID for AMD-8111's SMBus 1.0 supported by amdpm(4).
v. 1.15 date: 2005/10/10 02:25:24; author: linimon; state: Exp; lines: +1 -1 Reset bouncing maintainer addresses. Source: distfile survey Hat: portmgr
v. 1.14 date: 2004/11/19 16:02:54; author: vs; state: Exp; lines: +7 -2 Install mbmon.1 PR: ports/72348 Submitted by: Dmitry Kazarov Approved by: maintainer timeout
v. 1.13 date: 2004/11/18 20:55:00; author: krion; state: Exp; lines: +1 -1 Fix MASTER_SITES PR: ports/74093 Submitted by: Serge Gagnon
v. 1.12 date: 2004/10/12 01:08:04; author: edwin; state: Exp; lines: +1 -1 maintainer-update of xmbmon port. maintainer-update of xmbmon port. TO VERSION 205 PR: ports/71814 Submitted by: NAKAMURA Kazushi
v. 1.11 date: 2004/05/24 20:22:41; author: pav; state: Exp; lines: +4 -3 - Update to 204 PR: ports/66218 Submitted by: NAKAMURA Kazushi (maintainer)
v. 1.10 date: 2004/02/25 09:55:24; author: kris; state: Exp; lines: +7 -1 BROKEN on !i386 and !amd64: Does not compile
v. 1.9 date: 2003/12/17 13:06:40; author: osa; state: Exp; lines: +2 -1 Enable monitoring for ADM9240. Submitted by: Alex Vasylenko Approved by: maintainer timeout (> 3 months) PR: 57930
v. 1.8 date: 2003/08/04 08:46:09; author: oliver; state: Exp; lines: +2 -5 update xmbmon to 203 Approved by: maintainer
v. 1.7 date: 2003/07/29 03:09:30; author: oliver; state: Exp; lines: +7 -4 update xmbmon to 202 Approved by: maintainer
v. 1.6 date: 2003/02/21 13:28:58; author: knu; state: Exp; lines: +1 -0 De-pkg-comment.
v. 1.5 date: 2003/02/05 00:52:56; author: pat; state: Exp; lines: +17 -28 Update to 201 PR: ports/42984 Submitted by: maintainer
v. 1.4 date: 2002/03/12 02:51:41; author: pat; state: Exp; lines: +2 -2 Update to 1.07p1 PR: 35705 Submitted by: maintainer
v. 1.3 date: 2002/02/17 06:39:57; author: pat; state: Exp; lines: +3 -4 Update to 1.07 PR: 35026 Submitted by: maintainer
v. 1.2 date: 2001/09/24 07:39:17; author: knu; state: Exp; lines: +29 -6 Add a WITHOUT_X11 knob and set PREFIX to LOCALBASE. Submitted by: MAINTAINER
v. 1.1 date: 2001/09/03 17:37:52; author: knu; state: Exp; Add xmbmon, X/tty motherboard monitor for LM78/79, W8378x, AS99127F and VT82C686. PR: ports/30233 Submitted by: NAKAMURA Kazushi ============================================================================= v. 1.24 date: 2007/09/24 05:18:45; author: edwin; state: Exp; lines: +1 -1 [PATCH] sysutils/mbmon - enables recognition of 657DHG controller Enclosed one line patch enables mbmon's recognition of the 657DHG temp sensing device on the Asus P5x motherboard series PR: ports/116474 Submitted by: Howard Goldstein Approved by: maintainer timeout
v. 1.23 date: 2006/05/03 19:46:55; author: jylefort; state: Exp; lines: +1 -1 Call fflush() after printing sensor values. This allows to use mbmon in scripts, etc.
v. 1.22 date: 2006/05/03 17:32:38; author: jylefort; state: Exp; lines: +1 -1 Recognize a Winbond chip on the MSI Neo4-FI motherboard. PR: ports/96718 Submitted by: pav
v. 1.21 date: 2006/03/19 02:24:29; author: jylefort; state: Exp; lines: +5 -1 Add a rcng startup script for the daemon mode. PR: ports/94610 Submitted by: Douglas K. Rand
v. 1.20 date: 2006/02/01 20:05:08; author: jylefort; state: Exp; lines: +18 -32 - Split into two ports: mbmon (tty) and xmbmon (X) - Remove -s from LDFLAGS (do not unconditionally strip, let ${INSTALL_PROGRAM} do it) - Use OPTIONS - Decouple manpage installation from NOPORTDOCS - xmbmon: - use X prefix - install xmbmon.resources into the appropriate location - do not require a font package: use fixed rather than Helvetica [1] - Take maintainership [1]: PR: ports/92600 Submitted by: Daniel Berlin
v. 1.19 date: 2005/12/30 22:12:13; author: ru; state: Exp; lines: +5 -1 Allow to compile without smb(4) support.
v. 1.18 date: 2005/12/30 21:33:17; author: ru; state: Exp; lines: +1 -1 - Process the -P option when compiled with smb(4) support. - Add PCI IDs for both SMBus controllers of AMD-8111. NB: The non-smb(4) access to the AMD-8111 SMBus 2.0 controller is broken -- should use EC, like our amdsmb.c driver does.
v. 1.17 date: 2005/12/21 14:03:54; author: ru; state: Exp; lines: +1 -1 Fix reading temperature and voltage from ADM1027 sensors: - Don't add offsets, they are added automatically by the chip. - Make sure to read all registers with MSBs after reading from the extended resoltion register, otherwise they stay locked. This makes mbmon actually work on Asus S2882-D Opteron server motherboards with the ADM1027 chip, using amdpm(4) + smb(4). (Except it doesn't show the 4th FAN RPM counter; fix not committed at this time.) In collaboration with: Vsevolod Lobko
v. 1.16 date: 2005/12/16 16:23:40; author: ru; state: Exp; lines: +1 -1 - Enable smb(4) support (on amd64 and i386 for now). - Fix PCI ID for AMD-8111's SMBus 1.0 supported by amdpm(4).
v. 1.15 date: 2005/10/10 02:25:24; author: linimon; state: Exp; lines: +1 -1 Reset bouncing maintainer addresses. Source: distfile survey Hat: portmgr
v. 1.14 date: 2004/11/19 16:02:54; author: vs; state: Exp; lines: +7 -2 Install mbmon.1 PR: ports/72348 Submitted by: Dmitry Kazarov Approved by: maintainer timeout
v. 1.13 date: 2004/11/18 20:55:00; author: krion; state: Exp; lines: +1 -1 Fix MASTER_SITES PR: ports/74093 Submitted by: Serge Gagnon
v. 1.12 date: 2004/10/12 01:08:04; author: edwin; state: Exp; lines: +1 -1 maintainer-update of xmbmon port. maintainer-update of xmbmon port. TO VERSION 205 PR: ports/71814 Submitted by: NAKAMURA Kazushi
v. 1.11 date: 2004/05/24 20:22:41; author: pav; state: Exp; lines: +4 -3 - Update to 204 PR: ports/66218 Submitted by: NAKAMURA Kazushi (maintainer)
v. 1.10 date: 2004/02/25 09:55:24; author: kris; state: Exp; lines: +7 -1 BROKEN on !i386 and !amd64: Does not compile
v. 1.9 date: 2003/12/17 13:06:40; author: osa; state: Exp; lines: +2 -1 Enable monitoring for ADM9240. Submitted by: Alex Vasylenko Approved by: maintainer timeout (> 3 months) PR: 57930
v. 1.8 date: 2003/08/04 08:46:09; author: oliver; state: Exp; lines: +2 -5 update xmbmon to 203 Approved by: maintainer
v. 1.7 date: 2003/07/29 03:09:30; author: oliver; state: Exp; lines: +7 -4 update xmbmon to 202 Approved by: maintainer
v. 1.6 date: 2003/02/21 13:28:58; author: knu; state: Exp; lines: +1 -0 De-pkg-comment.
v. 1.5 date: 2003/02/05 00:52:56; author: pat; state: Exp; lines: +17 -28 Update to 201 PR: ports/42984 Submitted by: maintainer
v. 1.4 date: 2002/03/12 02:51:41; author: pat; state: Exp; lines: +2 -2 Update to 1.07p1 PR: 35705 Submitted by: maintainer
v. 1.3 date: 2002/02/17 06:39:57; author: pat; state: Exp; lines: +3 -4 Update to 1.07 PR: 35026 Submitted by: maintainer
v. 1.2 date: 2001/09/24 07:39:17; author: knu; state: Exp; lines: +29 -6 Add a WITHOUT_X11 knob and set PREFIX to LOCALBASE. Submitted by: MAINTAINER
v. 1.1 date: 2001/09/03 17:37:52; author: knu; state: Exp; Add xmbmon, X/tty motherboard monitor for LM78/79, W8378x, AS99127F and VT82C686. PR: ports/30233 Submitted by: NAKAMURA Kazushi ============================================================================= v. 1.24 date: 2007/09/24 05:18:45; author: edwin; state: Exp; lines: +1 -1 [PATCH] sysutils/mbmon - enables recognition of 657DHG controller Enclosed one line patch enables mbmon's recognition of the 657DHG temp sensing device on the Asus P5x motherboard series PR: ports/116474 Submitted by: Howard Goldstein Approved by: maintainer timeout
v. 1.23 date: 2006/05/03 19:46:55; author: jylefort; state: Exp; lines: +1 -1 Call fflush() after printing sensor values. This allows to use mbmon in scripts, etc.
v. 1.22 date: 2006/05/03 17:32:38; author: jylefort; state: Exp; lines: +1 -1 Recognize a Winbond chip on the MSI Neo4-FI motherboard. PR: ports/96718 Submitted by: pav
v. 1.21 date: 2006/03/19 02:24:29; author: jylefort; state: Exp; lines: +5 -1 Add a rcng startup script for the daemon mode. PR: ports/94610 Submitted by: Douglas K. Rand
v. 1.20 date: 2006/02/01 20:05:08; author: jylefort; state: Exp; lines: +18 -32 - Split into two ports: mbmon (tty) and xmbmon (X) - Remove -s from LDFLAGS (do not unconditionally strip, let ${INSTALL_PROGRAM} do it) - Use OPTIONS - Decouple manpage installation from NOPORTDOCS - xmbmon: - use X prefix - install xmbmon.resources into the appropriate location - do not require a font package: use fixed rather than Helvetica [1] - Take maintainership [1]: PR: ports/92600 Submitted by: Daniel Berlin
v. 1.19 date: 2005/12/30 22:12:13; author: ru; state: Exp; lines: +5 -1 Allow to compile without smb(4) support.
v. 1.18 date: 2005/12/30 21:33:17; author: ru; state: Exp; lines: +1 -1 - Process the -P option when compiled with smb(4) support. - Add PCI IDs for both SMBus controllers of AMD-8111. NB: The non-smb(4) access to the AMD-8111 SMBus 2.0 controller is broken -- should use EC, like our amdsmb.c driver does.
v. 1.17 date: 2005/12/21 14:03:54; author: ru; state: Exp; lines: +1 -1 Fix reading temperature and voltage from ADM1027 sensors: - Don't add offsets, they are added automatically by the chip. - Make sure to read all registers with MSBs after reading from the extended resoltion register, otherwise they stay locked. This makes mbmon actually work on Asus S2882-D Opteron server motherboards with the ADM1027 chip, using amdpm(4) + smb(4). (Except it doesn't show the 4th FAN RPM counter; fix not committed at this time.) In collaboration with: Vsevolod Lobko
v. 1.16 date: 2005/12/16 16:23:40; author: ru; state: Exp; lines: +1 -1 - Enable smb(4) support (on amd64 and i386 for now). - Fix PCI ID for AMD-8111's SMBus 1.0 supported by amdpm(4).
v. 1.15 date: 2005/10/10 02:25:24; author: linimon; state: Exp; lines: +1 -1 Reset bouncing maintainer addresses. Source: distfile survey Hat: portmgr
v. 1.14 date: 2004/11/19 16:02:54; author: vs; state: Exp; lines: +7 -2 Install mbmon.1 PR: ports/72348 Submitted by: Dmitry Kazarov Approved by: maintainer timeout
v. 1.13 date: 2004/11/18 20:55:00; author: krion; state: Exp; lines: +1 -1 Fix MASTER_SITES PR: ports/74093 Submitted by: Serge Gagnon
v. 1.12 date: 2004/10/12 01:08:04; author: edwin; state: Exp; lines: +1 -1 maintainer-update of xmbmon port. maintainer-update of xmbmon port. TO VERSION 205 PR: ports/71814 Submitted by: NAKAMURA Kazushi
v. 1.11 date: 2004/05/24 20:22:41; author: pav; state: Exp; lines: +4 -3 - Update to 204 PR: ports/66218 Submitted by: NAKAMURA Kazushi (maintainer)
v. 1.10 date: 2004/02/25 09:55:24; author: kris; state: Exp; lines: +7 -1 BROKEN on !i386 and !amd64: Does not compile
v. 1.9 date: 2003/12/17 13:06:40; author: osa; state: Exp; lines: +2 -1 Enable monitoring for ADM9240. Submitted by: Alex Vasylenko Approved by: maintainer timeout (> 3 months) PR: 57930
v. 1.8 date: 2003/08/04 08:46:09; author: oliver; state: Exp; lines: +2 -5 update xmbmon to 203 Approved by: maintainer
v. 1.7 date: 2003/07/29 03:09:30; author: oliver; state: Exp; lines: +7 -4 update xmbmon to 202 Approved by: maintainer
v. 1.6 date: 2003/02/21 13:28:58; author: knu; state: Exp; lines: +1 -0 De-pkg-comment.
v. 1.5 date: 2003/02/05 00:52:56; author: pat; state: Exp; lines: +17 -28 Update to 201 PR: ports/42984 Submitted by: maintainer
v. 1.4 date: 2002/03/12 02:51:41; author: pat; state: Exp; lines: +2 -2 Update to 1.07p1 PR: 35705 Submitted by: maintainer
v. 1.3 date: 2002/02/17 06:39:57; author: pat; state: Exp; lines: +3 -4 Update to 1.07 PR: 35026 Submitted by: maintainer
v. 1.2 date: 2001/09/24 07:39:17; author: knu; state: Exp; lines: +29 -6 Add a WITHOUT_X11 knob and set PREFIX to LOCALBASE. Submitted by: MAINTAINER
v. 1.1 date: 2001/09/03 17:37:52; author: knu; state: Exp; Add xmbmon, X/tty motherboard monitor for LM78/79, W8378x, AS99127F and VT82C686. PR: ports/30233 Submitted by: NAKAMURA Kazushi =============================================================================



Main menu

FreeBSD

Program categories

Freebsd accessibility
Freebsd archivers
Freebsd astro
Freebsd audio
Freebsd benchmarks
Freebsd biology
Freebsd cad
Freebsd chinese
Freebsd comms
Freebsd converters
Freebsd databases
Freebsd deskutils
Freebsd devel
Freebsd dns
Freebsd editors
Freebsd emulators
Freebsd finance
Freebsd french
Freebsd ftp
Freebsd games
Freebsd german
Freebsd graphics
Freebsd hebrew
Freebsd hungarian
Freebsd irc
Freebsd japanese
Freebsd java
Freebsd korean
Freebsd lang
Freebsd mail
Freebsd math
Freebsd mbone
Freebsd misc
Freebsd multimedia
Freebsd net
Freebsd net-im
Freebsd net-mgmt
Freebsd net-p2p
Freebsd news
Freebsd palm
Freebsd polish
Freebsd ports-mgmt
Freebsd portuguese
Freebsd print
Freebsd russian
Freebsd science
Freebsd security
Freebsd shells
Freebsd sysutils
Freebsd textproc
Freebsd ukrainian
Freebsd vietnamese
Freebsd www
Freebsd x11
Freebsd x11-clocks
Freebsd x11-drivers
Freebsd x11-fm
Freebsd x11-fonts
Freebsd x11-servers
Freebsd x11-themes
Freebsd x11-toolkits
Freebsd x11-wm