The FreeBSD Ports Archive
FreeBSD sysutils  : asmon
A swallowable applet monitors the CPU usage, memory and swap, etc
The asmon tool is an AfterStep look-n-feel memory, swap, cpu, and load
average monitor for X Windows. "Lights" indicate swap and vm paging.
Also displays system uptime or X memory usage.
|
asmon history
v. 1.16
date: 2007/05/19 20:23:00; author: flz; state: Exp; lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.15
date: 2006/05/13 04:15:24; author: edwin; state: Exp; lines: +0 -1
Remove USE_REINPLACE from all categories starting with S
v. 1.14
date: 2005/04/20 14:18:31; author: vs; state: Exp; lines: +13 -6
Avoid Makefile-patch. I didn't get v0.61 to compile on non-i386, though (kvm-related).
v. 1.13
date: 2004/02/05 20:37:49; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES.
Reviewed by: marcus
v. 1.12
date: 2004/02/04 05:08:54; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.11
date: 2003/11/19 19:28:38; author: eik; state: Exp; lines: +1 -1
Reset unreachable MAINTAINERs to ports@FreeBSD.org
PR: 59109
Approved by: marcus (mentor)
v. 1.10
date: 2003/02/21 13:28:35; author: knu; state: Exp; lines: +2 -1
De-pkg-comment.
v. 1.9
date: 2000/08/03 09:26:19; author: asami; state: Exp; lines: +2 -3
(1) Add new variable, XFREE86_VERSION, to specify which version of
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
v. 1.8
date: 2000/08/03 07:59:31; author: asami; state: Exp; lines: +3 -2
USE_X_PREFIX should be before bsd.port.pre.mk include.
v. 1.7
date: 2000/07/18 16:14:56; author: alex; state: Exp; lines: +1 -4
Update to work with 4.x's new VM system.
PR: 19990
Submitted by: maintainer
v. 1.6
date: 2000/06/23 13:14:37; author: sobomax; state: Exp; lines: +4 -4
- Use MASTER_SITE_AFTERSTEP to MASTER_SITES
PR: 19468
Submitted by: KATO Tsuguru
v. 1.5
date: 2000/04/22 10:11:32; author: mharo; state: Exp; lines: +2 -2
Corrrect whitespace introduced during PORTNAME conversion and portlint
v. 1.4
date: 2000/04/09 19:07:11; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variable
v. 1.3
date: 2000/02/07 21:18:57; author: billf; state: Exp; lines: +3 -3
Add a MASTER_SITE and fix the original MASTER_SITE.
I also added the md5 of the second MASTER_SITE because there was no (real)
difference between the two tarballs.
PR: ports/16571
Submitted by: maintainer
v. 1.2
date: 2000/01/30 02:34:28; author: kris; state: Exp; lines: +3 -3
Drop privileges before executing user commands.
Chase the checksum and remove (temporarily) the second MASTER_SITE. The
distfile from the second site (which has the old md5 sum) has no content
differences but it's 9 bytes longer.
Submitted by: jedgar
v. 1.1
date: 1999/10/05 16:30:00; author: cpiazza; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1999/10/05 16:30:00; author: cpiazza; state: Exp; lines: +0 -0
The asmon tool is an AfterStep look-n-feel memory, swap, cpu, and load
average monitor for X Windows. "Lights" indicate swap and vm paging.
Also displays system uptime or X memory usage.
PR: 14008
Submitted by: jack@germanium.xtalwind.net
=============================================================================
v. 1.16
date: 2007/05/19 20:23:00; author: flz; state: Exp; lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.15
date: 2006/05/13 04:15:24; author: edwin; state: Exp; lines: +0 -1
Remove USE_REINPLACE from all categories starting with S
v. 1.14
date: 2005/04/20 14:18:31; author: vs; state: Exp; lines: +13 -6
Avoid Makefile-patch. I didn't get v0.61 to compile on non-i386, though (kvm-related).
v. 1.13
date: 2004/02/05 20:37:49; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES.
Reviewed by: marcus
v. 1.12
date: 2004/02/04 05:08:54; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.11
date: 2003/11/19 19:28:38; author: eik; state: Exp; lines: +1 -1
Reset unreachable MAINTAINERs to ports@FreeBSD.org
PR: 59109
Approved by: marcus (mentor)
v. 1.10
date: 2003/02/21 13:28:35; author: knu; state: Exp; lines: +2 -1
De-pkg-comment.
v. 1.9
date: 2000/08/03 09:26:19; author: asami; state: Exp; lines: +2 -3
(1) Add new variable, XFREE86_VERSION, to specify which version of
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
v. 1.8
date: 2000/08/03 07:59:31; author: asami; state: Exp; lines: +3 -2
USE_X_PREFIX should be before bsd.port.pre.mk include.
v. 1.7
date: 2000/07/18 16:14:56; author: alex; state: Exp; lines: +1 -4
Update to work with 4.x's new VM system.
PR: 19990
Submitted by: maintainer
v. 1.6
date: 2000/06/23 13:14:37; author: sobomax; state: Exp; lines: +4 -4
- Use MASTER_SITE_AFTERSTEP to MASTER_SITES
PR: 19468
Submitted by: KATO Tsuguru
v. 1.5
date: 2000/04/22 10:11:32; author: mharo; state: Exp; lines: +2 -2
Corrrect whitespace introduced during PORTNAME conversion and portlint
v. 1.4
date: 2000/04/09 19:07:11; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variable
v. 1.3
date: 2000/02/07 21:18:57; author: billf; state: Exp; lines: +3 -3
Add a MASTER_SITE and fix the original MASTER_SITE.
I also added the md5 of the second MASTER_SITE because there was no (real)
difference between the two tarballs.
PR: ports/16571
Submitted by: maintainer
v. 1.2
date: 2000/01/30 02:34:28; author: kris; state: Exp; lines: +3 -3
Drop privileges before executing user commands.
Chase the checksum and remove (temporarily) the second MASTER_SITE. The
distfile from the second site (which has the old md5 sum) has no content
differences but it's 9 bytes longer.
Submitted by: jedgar
v. 1.1
date: 1999/10/05 16:30:00; author: cpiazza; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1999/10/05 16:30:00; author: cpiazza; state: Exp; lines: +0 -0
The asmon tool is an AfterStep look-n-feel memory, swap, cpu, and load
average monitor for X Windows. "Lights" indicate swap and vm paging.
Also displays system uptime or X memory usage.
PR: 14008
Submitted by: jack@germanium.xtalwind.net
=============================================================================
v. 1.16
date: 2007/05/19 20:23:00; author: flz; state: Exp; lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.15
date: 2006/05/13 04:15:24; author: edwin; state: Exp; lines: +0 -1
Remove USE_REINPLACE from all categories starting with S
v. 1.14
date: 2005/04/20 14:18:31; author: vs; state: Exp; lines: +13 -6
Avoid Makefile-patch. I didn't get v0.61 to compile on non-i386, though (kvm-related).
v. 1.13
date: 2004/02/05 20:37:49; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES.
Reviewed by: marcus
v. 1.12
date: 2004/02/04 05:08:54; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.11
date: 2003/11/19 19:28:38; author: eik; state: Exp; lines: +1 -1
Reset unreachable MAINTAINERs to ports@FreeBSD.org
PR: 59109
Approved by: marcus (mentor)
v. 1.10
date: 2003/02/21 13:28:35; author: knu; state: Exp; lines: +2 -1
De-pkg-comment.
v. 1.9
date: 2000/08/03 09:26:19; author: asami; state: Exp; lines: +2 -3
(1) Add new variable, XFREE86_VERSION, to specify which version of
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
v. 1.8
date: 2000/08/03 07:59:31; author: asami; state: Exp; lines: +3 -2
USE_X_PREFIX should be before bsd.port.pre.mk include.
v. 1.7
date: 2000/07/18 16:14:56; author: alex; state: Exp; lines: +1 -4
Update to work with 4.x's new VM system.
PR: 19990
Submitted by: maintainer
v. 1.6
date: 2000/06/23 13:14:37; author: sobomax; state: Exp; lines: +4 -4
- Use MASTER_SITE_AFTERSTEP to MASTER_SITES
PR: 19468
Submitted by: KATO Tsuguru
v. 1.5
date: 2000/04/22 10:11:32; author: mharo; state: Exp; lines: +2 -2
Corrrect whitespace introduced during PORTNAME conversion and portlint
v. 1.4
date: 2000/04/09 19:07:11; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variable
v. 1.3
date: 2000/02/07 21:18:57; author: billf; state: Exp; lines: +3 -3
Add a MASTER_SITE and fix the original MASTER_SITE.
I also added the md5 of the second MASTER_SITE because there was no (real)
difference between the two tarballs.
PR: ports/16571
Submitted by: maintainer
v. 1.2
date: 2000/01/30 02:34:28; author: kris; state: Exp; lines: +3 -3
Drop privileges before executing user commands.
Chase the checksum and remove (temporarily) the second MASTER_SITE. The
distfile from the second site (which has the old md5 sum) has no content
differences but it's 9 bytes longer.
Submitted by: jedgar
v. 1.1
date: 1999/10/05 16:30:00; author: cpiazza; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1999/10/05 16:30:00; author: cpiazza; state: Exp; lines: +0 -0
The asmon tool is an AfterStep look-n-feel memory, swap, cpu, and load
average monitor for X Windows. "Lights" indicate swap and vm paging.
Also displays system uptime or X memory usage.
PR: 14008
Submitted by: jack@germanium.xtalwind.net
=============================================================================
|
| |
|