The FreeBSD Ports Archive
FreeBSD sysutils  : ascpu
CPU statistics monitor utility for XFree86
ascpu history
v. 1.17
date: 2007/05/19 20:22:59; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.16
date: 2005/10/24 06:51:41; author: demon; state: Exp; lines: +1 -1
Hopefully fix build with non-standard X11BASE (I can't test it).
v. 1.15
date: 2005/10/24 06:15:39; author: demon; state: Exp; lines: +1 -1
Update to version 1.11.
v. 1.14
date: 2004/02/06 13:12:21; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES (bento-tested, marcus-reviewed).
v. 1.13
date: 2003/03/07 06:11:07; author: ade; state: Exp; lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.12
date: 2002/07/02 06:43:22; author: demon; state: Exp; lines: +2 -3
Correct MASTER_SITES and WWW
Submitted by: Seamus Venasse
v. 1.11
date: 2000/11/13 12:44:59; author: demon; state: Exp; lines: +2 -2
Change MAINTAINER field.
I am now at FreeBSD dot org
Approved by: sobomax
v. 1.10
date: 2000/08/03 09:26:15; author: asami; state: Exp; lines: +3 -3
(1) Add new variable, XFREE86_VERSION, to specify which version of
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
v. 1.9
date: 2000/07/04 10:09:51; author: sobomax; state: Exp; lines: +8 -6
Update to 1.9.
PR: 19679
Submitted by: maintainer
v. 1.8
date: 2000/04/22 10:11:29; author: mharo; state: Exp; lines: +2 -2
Corrrect whitespace introduced during PORTNAME conversion and portlint
v. 1.7
date: 2000/04/09 19:07:07; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variable
v. 1.6
date: 1999/12/24 04:53:40; author: steve; state: Exp; lines: +3 -3
Update to version 1.8.
PR: 15568
Submitted by: maintainer
v. 1.5
date: 1999/08/31 01:59:30; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.4
date: 1999/05/09 16:17:30; author: steve; state: Exp; lines: +3 -3
Update to version 1.6.
PR: 11585
Submitted by: Chris Piazza
v. 1.3
date: 1999/05/01 02:09:34; author: steve; state: Exp; lines: +3 -4
Update to version 1.5.
PR: 11397
Submitted by: Chris Piazza
v. 1.2
date: 1999/04/23 16:35:57; author: jseger; state: Exp; lines: +3 -3
Upgrade to ascpu-1.4
v. 1.1
date: 1999/02/28 04:30:59; author: billf; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1999/02/28 04:30:59; author: billf; state: Exp; lines: +0 -0
This is an Afterstep look & feel CPU statistics monitor tool.
http://bewoner.dma.be/Albert/afterstep/
PR: ports/10144
Submitted By: Dima Sivachenko
=============================================================================
v. 1.17
date: 2007/05/19 20:22:59; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.16
date: 2005/10/24 06:51:41; author: demon; state: Exp; lines: +1 -1
Hopefully fix build with non-standard X11BASE (I can't test it).
v. 1.15
date: 2005/10/24 06:15:39; author: demon; state: Exp; lines: +1 -1
Update to version 1.11.
v. 1.14
date: 2004/02/06 13:12:21; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES (bento-tested, marcus-reviewed).
v. 1.13
date: 2003/03/07 06:11:07; author: ade; state: Exp; lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.12
date: 2002/07/02 06:43:22; author: demon; state: Exp; lines: +2 -3
Correct MASTER_SITES and WWW
Submitted by: Seamus Venasse
v. 1.11
date: 2000/11/13 12:44:59; author: demon; state: Exp; lines: +2 -2
Change MAINTAINER field.
I am now at FreeBSD dot org
Approved by: sobomax
v. 1.10
date: 2000/08/03 09:26:15; author: asami; state: Exp; lines: +3 -3
(1) Add new variable, XFREE86_VERSION, to specify which version of
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
v. 1.9
date: 2000/07/04 10:09:51; author: sobomax; state: Exp; lines: +8 -6
Update to 1.9.
PR: 19679
Submitted by: maintainer
v. 1.8
date: 2000/04/22 10:11:29; author: mharo; state: Exp; lines: +2 -2
Corrrect whitespace introduced during PORTNAME conversion and portlint
v. 1.7
date: 2000/04/09 19:07:07; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variable
v. 1.6
date: 1999/12/24 04:53:40; author: steve; state: Exp; lines: +3 -3
Update to version 1.8.
PR: 15568
Submitted by: maintainer
v. 1.5
date: 1999/08/31 01:59:30; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.4
date: 1999/05/09 16:17:30; author: steve; state: Exp; lines: +3 -3
Update to version 1.6.
PR: 11585
Submitted by: Chris Piazza
v. 1.3
date: 1999/05/01 02:09:34; author: steve; state: Exp; lines: +3 -4
Update to version 1.5.
PR: 11397
Submitted by: Chris Piazza
v. 1.2
date: 1999/04/23 16:35:57; author: jseger; state: Exp; lines: +3 -3
Upgrade to ascpu-1.4
v. 1.1
date: 1999/02/28 04:30:59; author: billf; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1999/02/28 04:30:59; author: billf; state: Exp; lines: +0 -0
This is an Afterstep look & feel CPU statistics monitor tool.
http://bewoner.dma.be/Albert/afterstep/
PR: ports/10144
Submitted By: Dima Sivachenko
=============================================================================
v. 1.17
date: 2007/05/19 20:22:59; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.16
date: 2005/10/24 06:51:41; author: demon; state: Exp; lines: +1 -1
Hopefully fix build with non-standard X11BASE (I can't test it).
v. 1.15
date: 2005/10/24 06:15:39; author: demon; state: Exp; lines: +1 -1
Update to version 1.11.
v. 1.14
date: 2004/02/06 13:12:21; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES (bento-tested, marcus-reviewed).
v. 1.13
date: 2003/03/07 06:11:07; author: ade; state: Exp; lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.12
date: 2002/07/02 06:43:22; author: demon; state: Exp; lines: +2 -3
Correct MASTER_SITES and WWW
Submitted by: Seamus Venasse
v. 1.11
date: 2000/11/13 12:44:59; author: demon; state: Exp; lines: +2 -2
Change MAINTAINER field.
I am now at FreeBSD dot org
Approved by: sobomax
v. 1.10
date: 2000/08/03 09:26:15; author: asami; state: Exp; lines: +3 -3
(1) Add new variable, XFREE86_VERSION, to specify which version of
XFree86 (3 or 4) to depend to when USE_XLIB is set.
XFREE86_VERSION defaults to 3 for now, but adventurous users can
override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB
will add a dependency to x11/XFree86; when it is set to 4, the
dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS
hacks to avoid messing with XFree86 are turned off.
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbm
v. 1.9
date: 2000/07/04 10:09:51; author: sobomax; state: Exp; lines: +8 -6
Update to 1.9.
PR: 19679
Submitted by: maintainer
v. 1.8
date: 2000/04/22 10:11:29; author: mharo; state: Exp; lines: +2 -2
Corrrect whitespace introduced during PORTNAME conversion and portlint
v. 1.7
date: 2000/04/09 19:07:07; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variable
v. 1.6
date: 1999/12/24 04:53:40; author: steve; state: Exp; lines: +3 -3
Update to version 1.8.
PR: 15568
Submitted by: maintainer
v. 1.5
date: 1999/08/31 01:59:30; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.4
date: 1999/05/09 16:17:30; author: steve; state: Exp; lines: +3 -3
Update to version 1.6.
PR: 11585
Submitted by: Chris Piazza
v. 1.3
date: 1999/05/01 02:09:34; author: steve; state: Exp; lines: +3 -4
Update to version 1.5.
PR: 11397
Submitted by: Chris Piazza
v. 1.2
date: 1999/04/23 16:35:57; author: jseger; state: Exp; lines: +3 -3
Upgrade to ascpu-1.4
v. 1.1
date: 1999/02/28 04:30:59; author: billf; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1999/02/28 04:30:59; author: billf; state: Exp; lines: +0 -0
This is an Afterstep look & feel CPU statistics monitor tool.
http://bewoner.dma.be/Albert/afterstep/
PR: ports/10144
Submitted By: Dima Sivachenko
=============================================================================
|
| |
|