The FreeBSD Ports Archive
FreeBSD print  : ghostscript-gnu
GNU Postscript interpreter
Ghostscript is the well-known PostScript interpreter which is available for
all common and most esoteric platforms and supports many different printers
and some displays.
Versions entitled "GNU Ghostscript" are distributed with the GNU General
Public License, which allows free use, and free copying and redistribution
under certain conditions (including, in some cases, commercial distribution).
This is the older version 7, for those that can't (or don't want to) use
the newer Ghostscript version 8.
This port includes add-on packages (not part of the official gs release)
o HP8XX driver for HP DeskJet 880C/882C/895C
- http://www.gelhaus.net/hp880c/
o DJ970 driver for HP DeskJet 970CXi
- http://www.harsch.net/Ghostscript/ghostscript.html
o PCL3 driver for HP DeskJet series
- http://home.vrweb.de/martin.lottermoser/pcl3.html
o Gimp-Print driver for Canon/Epson/Lexmark/HP printers
- http://gimp-print.sourceforge.net/
o Special drivers for verious printer models
- Alps, Canon, Epson, NEC, Lexmark, Ricoh,...
o Additional contributed uniprint driver profiles for
- Epson Stylus Color 740 and Epson LQ-1170
http://www.cs.wisc.edu/~ghost/doc/gnu/index.htm
|
ghostscript-gnu history
v. 1.125
date: 2007/09/24 08:39:21; author: rafan; state: Exp; lines: +1 -1
Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.
Approved by: portmgr (pav)
v. 1.124
date: 2007/08/03 21:46:53; author: mm; state: Exp; lines: +1 -1
- Replace USE_XLIB with USE_XORG (xt xext)
- Bump PORTREVISION
Tested by: pointyhat
Thanks to: pav (testing)
Approved by: garga (mentor, implicit)
v. 1.123
date: 2007/05/20 11:50:22; author: pav; state: Exp; lines: +0 -1
- Bump PORTREVISION for xorg72 import (automated tool got confused here)
Reported by: netchild
Approved by: portmgr (implicit)
v. 1.122
date: 2007/05/19 20:20:51; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.121
date: 2006/08/15 00:56:22; author: clsung; state: Exp; lines: +1 -1
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include misc/ multimedia/ net/ net-mgmt/ net-im/
net-p2p/ palm/ print/ science/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin
v. 1.120
date: 2006/05/31 16:24:03; author: novel; state: Exp; lines: +2 -2
Fix some typos in comments.
Submitted by: stefanf
v. 1.119
date: 2006/05/21 19:02:08; author: arved; state: Exp; lines: +3 -2
Fix fetch of eplaser distfile by putting a copy on MASTER_SITE_LOCAL
v. 1.118
date: 2006/05/13 01:03:12; author: edwin; state: Exp; lines: +0 -1
Remove USE_REINPLACE from all categories starting with P
v. 1.117
date: 2005/12/27 23:58:20; author: pav; state: Exp; lines: +2 -0
- Add conflicts
PR: ports/80491
Submitted by: LI Dong
v. 1.116
date: 2005/11/22 16:40:43; author: mnag; state: Exp; lines: +1 -1
Fix MASTER_SITES (pcl3-3.3.tar.gz)
PR: 89293
Notified by: diff
v. 1.115
date: 2005/06/08 10:54:10; author: barner; state: Exp; lines: +12 -49
- Update MASTER_SITES for MD2K driver
- Remove HPDJ driver completely (officially discontinued)
- Add KRGB support patch for IJS driver
- Bump GS_REVISION
Submitted by: KATO Tsuguru
Tested by: Jose M Rodriguez
PR: ports/81962
v. 1.114
date: 2005/06/06 15:13:23; author: barner; state: Exp; lines: +5 -3
- Update master site and homepage for PCL3 driver
- Add FIXME item noting that the HPDJ (predecessor of PCL3) has been
obsoleted by its author Martin Lottermoser.
v. 1.113
date: 2005/01/24 20:21:14; author: pav; state: Exp; lines: +1 -1
- Update gimp-print to 4.2.7
- Correct merge cups/pstoraster patches
PR: ports/76569
Submitted by: Jose M Rodriguez (freebsd)
v. 1.112
date: 2004/10/16 07:28:32; author: krion; state: Exp; lines: +1 -1
Announce the release of GPL Ghostscript. This release is based on
the AFPL Ghostscript 8.00 release of 14 months ago. The most
significant new feature since 7.0x is support for DeviceN
colorspaces, up to 8 colorants total at 8 bits per component. Also,
pdfwrite has seen considerable improvement in font handling, and
many other bug fixes.
PR: ports/72326
Submitted by: Ports Fury
v. 1.111
date: 2004/06/27 21:14:57; author: krion; state: Exp; lines: +1 -1
Fix package build
v. 1.110
date: 2004/06/27 18:13:39; author: krion; state: Exp; lines: +4 -3
Update EPLASER driver to version 3.1.4
PR: ports/68391
Submitted by: Ports Fury
v. 1.109
date: 2004/06/17 08:18:55; author: pav; state: Exp; lines: +1 -1
- Unify print/gsfonts dependency check
PR: ports/67999, ports/68035
Submitted by: Jose M Rodriguez
v. 1.108
date: 2004/06/14 14:02:09; author: nork; state: Exp; lines: +2 -2
Fix dependency on print/gsfonts.
Pointed out by: bento via kris, hrs
v. 1.107
date: 2004/06/13 12:36:20; author: nork; state: Exp; lines: +4 -10
o Remove ghostscript-fonts and Add dependency on print/gsfonts.
o Update gimp-print to 4.2.6.
o Fix implicit dependency on cups/ijs.
PR: ports/67574
Submitted by: Jose M Rodriguez
v. 1.106
date: 2004/05/09 18:26:18; author: krion; state: Exp; lines: +1 -1
- Fix MASTER_SITES
PR: ports/66398
Submitted by: Ports Fury
v. 1.105
date: 2004/04/10 17:26:47; author: trevor; state: Exp; lines: +2 -2
Tidy up whitespace.
v. 1.104
date: 2004/03/17 23:54:21; author: marcel; state: Exp; lines: +1 -1
s/pre-install/pre-su-install/ because we're creating directories under
${PREFIX}.
v. 1.103
date: 2004/02/04 05:08:34; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.102
date: 2004/01/12 14:34:03; author: krion; state: Exp; lines: +22 -35
- Replace HP2200 driver (currently unavailable at master site)
with HP8XX driver
- Update ghotscript-fonts-std to version 8.11
- Update EPLASER driver to version 3.1.4
- Fix minor bug in paparsize handling of LIPS driver
- Fix minor bug in Japanese vertical font support
PR: 61249
Submitted by: Ports Fury
v. 1.101
date: 2003/09/27 05:04:14; author: edwin; state: Exp; lines: +1 -1
Fix master_site for EPLASER files.
Noticed by: Adam McLaurin
v. 1.100
date: 2003/09/27 02:35:24; author: edwin; state: Exp; lines: +7 -7
Update port: print/ghostscript-gnu
- Update EPLASER driver to version 3.1.1
- Fix papersize handling of LIPS driver
- Enable hl1240/hl1250 driver by default configuration
PR: ports/57009
Submitted by: KATO Tsuguru
v. 1.99
date: 2003/07/26 23:26:50; author: nork; state: Exp; lines: +1 -1
Fix handling big post table and GSUB's Lookuplist
sub table. These problems cause that ghostscript
can't display with kochi-subst fonts.
PR: ports-jp/13949, ports-jp/13973
Reported by: Yoshihiko Sarumaru
Submitted by: KANOU Hiroki
Patched by: Akira TAGOH
v. 1.98
date: 2003/07/22 02:35:09; author: maho; state: Exp; lines: +0 -0
(forced commit)
Very sorry, thousand of apologizes...
I was in rush... and what I want to do is
forced commit to distinfo,
v. 1.97
date: 2003/07/22 02:28:58; author: maho; state: Exp; lines: +0 -0
My former commit to
This patch cope with the problem for bigger than 64 kb
the printer does not accept compressed data bands bigger than 64 kB
(gdevgdi-64k-bands-gtaylor.patch) is applied. So files not being
printed with the original driver will most probably be printed with
this version.
v. 1.96
date: 2003/07/21 13:41:52; author: arved; state: Exp; lines: +91 -91
Backout my previous commit and reenable .SILENT instead.
Take measures to cope with too frequent update (without version numbering)
of Samsung-SmartGDI driver
PR: 54708
Submitted by: KATO Tsuguru
v. 1.95
date: 2003/07/21 10:34:12; author: arved; state: Exp; lines: +88 -88
Add @'s before ECHO_MSGs.
v. 1.94
date: 2003/07/11 17:19:57; author: nork; state: Exp; lines: +5 -30
o Update GDI driver
o Replace NPDL driver (currently unavailable at master site)
with one included in LIPS driver
PR: ports/54103
Submitted by: Ports Fury
v. 1.93
date: 2003/07/11 16:14:50; author: nork; state: Exp; lines: +1 -1
Update URL for eplaser.
Reviewed by: Yoshihiko Sarumaru
v. 1.92
date: 2003/06/08 20:02:23; author: naddy; state: Exp; lines: +76 -5
Update to version 7.07.
PR: 52480
Submitted by: Ports Fury
v. 1.91
date: 2003/05/10 00:40:37; author: arved; state: Exp; lines: +1 -0
This port CONFLICTS with ghostscript-afpl*
v. 1.90
date: 2003/04/27 23:09:13; author: naddy; state: Exp; lines: +87 -73
Update to version 7.06.
PR: 51062
Submitted by: Ports Fury
v. 1.89
date: 2003/04/20 19:40:33; author: marcus; state: Exp; lines: +0 -1
Remove USE_GNOMENG.
v. 1.88
date: 2003/03/27 16:02:50; author: nork; state: Exp; lines: +1 -1
Bump PORTREVISION by previous commit.
And I forgot to mention that Support for EPSON LPC-9500.
v. 1.87
date: 2003/03/27 15:41:28; author: nork; state: Exp; lines: +6 -5
Eplaser update to 3.0.6.
PR: ports-jp/13600
Submitted by: Yoshihiko Sarumaru
v. 1.86
date: 2003/03/02 08:57:09; author: leeym; state: Exp; lines: +2 -1
- chown font files to root:wheel after extract them into datadir
- bump PORTREVISION
PR: 48821
Submitted by: Pat Lashley
v. 1.85
date: 2003/02/20 18:55:44; author: knu; state: Exp; lines: +1 -0
De-pkg-comment.
v. 1.84
date: 2002/11/10 16:47:41; author: lioux; state: Exp; lines: +0 -2
o Rollback PORTCOMMENT modifications while this feature's implementation
is better studied
o Turn PORTCOMMENT variable in Makefile back into pkg-comment files
Approved by: kris (portmgr hat),
portmgr, re (silence)
v. 1.83
date: 2002/11/06 22:46:37; author: adamw; state: Exp; lines: +2 -0
Use PORTCOMMENT in the Makefile, and whack the pkg-comment.
Approved by: pat
v. 1.82
date: 2002/10/07 01:17:24; author: ijliao; state: Exp; lines: +6 -1
- Wipe x11* items out from device config dialog when WITHOUT_X11 is defined
- Fix MASTER_SITES
PR: 43708
Submitted by: Ports Fury
v. 1.81
date: 2002/09/02 01:03:49; author: lioux; state: Exp; lines: +2 -1
Deploy USE_GNOMENG infrastructure
PR: 42302
Submitted by: Edwin Groothuis
v. 1.80
date: 2002/08/20 00:15:58; author: naddy; state: Exp; lines: +48 -1
Add back Gimp-Print (stp) driver support.
PR: 41800
Submitted by: Ports Fury
v. 1.79
date: 2002/08/17 21:36:29; author: naddy; state: Exp; lines: +26 -2
Add BJC250 driver.
PR: 41738
Submitted by: Ports Fury
v. 1.78
date: 2002/08/06 20:34:08; author: naddy; state: Exp; lines: +29 -60
- Spin off Gimp-Print driver.
- Update EPLASER driver to version 3.0.4.
- Update GDI driver.
PR: 41275
Submitted by: Ports Fury
v. 1.77
date: 2002/06/27 23:52:18; author: perky; state: Exp; lines: +5 -4
PERL -> REINPLACE_CMD
PR: 39706 39708 39709 39710
Submitted by: Scott Flatman
v. 1.76
date: 2002/05/10 03:15:18; author: ijliao; state: Exp; lines: +5 -42
Spin off HPIJS driver
PR: 37890, 37891
Submitted by: Ports Fury
v. 1.75
date: 2002/04/27 18:27:51; author: ijliao; state: Exp; lines: +34 -17
upgrade to 7.05
PR: 37501
Submitted by: Ports Fury
v. 1.74
date: 2002/04/20 15:38:25; author: ijliao; state: Exp; lines: +3 -3
- Update DISTNAME/MASTER_SITE of samsung-gdi driver
- Add workaround for the problem that ps2epsi doesn't work
PR: 37285
Submitted by: Ports Fury
v. 1.73
date: 2002/04/05 02:20:54; author: kuriyama; state: Exp; lines: +1 -0
Bump $PORTREVISION for previous commit (distfile changed).
Changes in gdevdj9.c include "both the Quality and the Duplex parameter
can be set using setpagedevice."
v. 1.72
date: 2002/04/04 02:03:08; author: kuriyama; state: Exp; lines: +364 -109
Upgrade to 6.53.
PR: ports/36674
Submitted by: KATO Tsuguru
v. 1.71
date: 2002/04/03 20:49:37; author: lioux; state: Exp; lines: +5 -5
o Fix breakage introduced in last rev:
- Comma operator does not work for {DIST,PATCH}FILES just yet,
re-arrange groups to achieve similar effect
Prompted by: John Hay
v. 1.70
date: 2002/04/02 21:38:47; author: lioux; state: Exp; lines: +13 -9
Complete deployment of MASTER_SITES:n
v. 1.69
date: 2002/03/09 00:27:21; author: trevor; state: Exp; lines: +14 -7
Sort some of the master sites.
v. 1.68
date: 2002/02/01 14:07:17; author: murray; state: Exp; lines: +1 -1
Bump PORTREVISION now that ps2epsi has been fixed.
Suggested by: bmah, will
v. 1.67
date: 2002/01/22 03:08:18; author: trevor; state: Exp; lines: +5 -5
Upgrade HPIJS (HP inkjet) driver to 1.0.2, featuring the latest
disclaimer technology (and allowing full-bleed printing on the
Photosmart 100), so increment PORTREVISION.
fix CAPS In Comment.
Invoke perl more specifically.
PR: 34140
Submitted by: KATO Tsuguru
v. 1.66
date: 2002/01/19 04:27:11; author: sf; state: Exp; lines: +3 -0
support CFLAGS/CXXFLAGS properly.
PR: 34026
Submitted by: KATO Tsuguru
v. 1.65
date: 2002/01/17 20:57:53; author: andreas; state: Exp; lines: +2 -5
Update HPIJS package from 1.0 to 1.0.1.
HP fixed "off-by-one error" in the HPIJS sources, that caused hpijs
to core dump at runtime, when being compiled with -O or -O2.
I confirmed, that everything works perfectly again with -O and -O2.
Bumped port revision, to flag this as an important change.
Thanks to David Suffield from HP who took our (and others) reports
seriously, fixed the bug and released the new HPIJS version.
v. 1.64
date: 2002/01/14 14:57:59; author: sf; state: Exp; lines: +3 -2
o fix build of HPinkjet driver.
o change WWW.
PR: 33798
Submitted by: KATO Tsuguru
v. 1.63
date: 2002/01/11 21:47:33; author: andreas; state: Exp; lines: +1 -1
- Fix hpijs 1.0 dumping core with the kind help of HP.
- Important fix, therefore PORTREVISION bumped.
background info: hpijs currently may not compiled with -O or -O2.
Simply leaving out any optimization (like it was default in prior
hpijs versions) cures the problem.
Many thanks to David Suffield from HP-Vancouver.
v. 1.62
date: 2002/01/01 14:07:39; author: dirk; state: Exp; lines: +1 -1
Fix build if ${PORTSDIR} is a symlink by finding jpeg's WRKSRC properly.
v. 1.61
date: 2001/12/27 16:47:05; author: lioux; state: Exp; lines: +63 -46
- Update Gimp-Print driver to version 4.2.0
- Update HPinkjet driver to version 1.0
- Better support for jpeg WRKDIR location
PR: 33061
Submitted by: KATO Tsuguru
v. 1.60
date: 2001/11/04 07:35:34; author: demon; state: Exp; lines: +5 -9
Update to 6.52
PR: 31724
Submitted by: KATO Tsuguru
v. 1.59
date: 2001/10/12 04:01:48; author: ijliao; state: Exp; lines: +10 -10
back out last commit
v. 1.58
date: 2001/10/11 11:01:42; author: ijliao; state: Exp; lines: +10 -10
DISTDIR/DIST_SUBDIR -> _DISTDIR
PR: 31174
Submitted by: Ports Fury
v. 1.57
date: 2001/10/06 17:24:19; author: lioux; state: Exp; lines: +29 -35
o style fixes
- deploy DATADIR/DOCSDIR
- don't use internal .mk work variables, rely on supported
ones
_DISTDIR -> DISTDIR/DIST_SUBDIR
o use for checking byte order instead of an
ARCH check
PR: 31078
Submitted by: KATO Tsuguru
v. 1.56
date: 2001/09/27 18:29:31; author: knu; state: Exp; lines: +2 -2
Perform one leftover s/DISTDIR/_DISTDIR/.
v. 1.55
date: 2001/09/27 18:02:57; author: knu; state: Exp; lines: +4 -4
Set DIST_SUBDIR=ghostscript, because this port requires lots of
distfiles with random names.
Suggested by: Andre Albsmeier
De-portlint while I'm here.
v. 1.54
date: 2001/09/12 17:05:47; author: knu; state: Exp; lines: +2 -2
Fix a compilation error when A4 is defined.
PR: 30522
Submitted by: KATO Tsuguru
v. 1.53
date: 2001/09/11 20:22:01; author: knu; state: Exp; lines: +1 -2
Remove duplicate PKGNAMESUFFIX lines I added.
v. 1.52
date: 2001/09/11 20:18:03; author: knu; state: Exp; lines: +2 -2
Use the :: operator for pre-everything.
Submitted by: Dan Langille
v. 1.51
date: 2001/09/11 19:12:18; author: knu; state: Exp; lines: +283 -39
** ghostscript55 has been repocopied to ghostscript-gnu **
Update to GNU Ghostscript 6.51.
PR: ports/29579
Submitted by: KATO Tsuguru
v. 1.50
date: 2001/09/11 02:59:06; author: ache; state: Exp; lines: +2 -2
Bump png major
v. 1.49
date: 2001/08/13 20:57:23; author: andreas; state: Exp; lines: +2 -2
change URL for pdfencrypt
PR: 27331
v. 1.48
date: 2001/07/06 10:35:13; author: andreas; state: Exp; lines: +2 -2
sorry, no time for maintenance, hand port over to ports team entirely
v. 1.47
date: 2001/06/20 05:11:51; author: obrien; state: Exp; lines: +3 -1
Make executive decision. `pkg_add -r ghostscript' will get you
version 6.x.
v. 1.46
date: 2000/09/11 19:07:36; author: andreas; state: Exp; lines: +9 -13
- Remove restriction of encrypted PDF support
- nonexistent -> NONEXISTENT
PR: 21082
Submitted by: tkato@prontomail.ne.jp
v. 1.45
date: 2000/08/24 21:20:29; author: andreas; state: Exp; lines: +18 -24
Update port: print/ghostscript55 to 5.50a
Thanks for port submission !
PR: 20266
Submitted by: tkato@prontomail.ne.jp
v. 1.44
date: 2000/07/26 07:43:48; author: sobomax; state: Exp; lines: +2 -2
Create ${WRKSRC} --> ${WRKDIR}/libpng sysmlink and use it in ghostscript ports
instead of hardcoded ${WRKSRC}/libpng-png.version.number.
v. 1.43
date: 2000/07/04 07:12:49; author: sobomax; state: Exp; lines: +2 -2
Bump png shared library version.
Submitted by: Hajimu UMEMOTO
v. 1.42
date: 2000/04/09 17:49:42; author: cpiazza; state: Exp; lines: +4 -4
Accidental whitespace
v. 1.41
date: 2000/04/09 17:40:12; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variables
v. 1.40
date: 2000/02/13 17:33:57; author: andreas; state: Exp; lines: +2 -2
tabify
v. 1.39
date: 2000/02/13 17:07:38; author: andreas; state: Exp; lines: +14 -9
- Disable encrypted PDF support by default (because of possible
export restrictions)
- tar -> TAR
PR: 16667
Submitted by: KATO Tsuguro
v. 1.38
date: 1999/11/26 16:25:06; author: andreas; state: Exp; lines: +2 -2
link false after upgrade of libpng from 1.0.3 to 1.0.5
Submitted by: Dominik Brettnacher
v. 1.37
date: 1999/11/26 03:00:40; author: jseger; state: Exp; lines: +2 -2
png-1.0.3 -> png-1.0.5
Submitted by: Christian Weisgerber
PR: ports/15052
v. 1.36
date: 1999/08/31 06:49:49; author: mharo; state: Exp; lines: +2 -2
FreeBSD.ORG -> FreeBSD.org
Prompted by PR: 13476, 13477
Submitted by: KATO Tsuguru
v. 1.35
date: 1999/08/31 01:44:47; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.34
date: 1999/07/15 21:53:13; author: asami; state: Exp; lines: +3 -3
Assorted ${WRKDIRPREFIX}/symlink ${PORTSDIR} fixes. mbone/vat still doesn't
build but at least it will have a better chance.
v. 1.33
date: 1999/05/15 01:14:34; author: andreas; state: Exp; lines: +3 -1
unix-lpr.sh and lprsetup.sh are missing from the package.
fixed install target and PLIST file.
Reported by: Marko Schuetz
v. 1.32
date: 1999/01/23 07:05:22; author: vanilla; state: Exp; lines: +2 -2
Bump png's major number to 3.
v. 1.31
date: 1999/01/21 18:08:50; author: vanilla; state: Exp; lines: +2 -2
png's version is 1.0.3 now.
v. 1.30
date: 1999/01/13 07:24:57; author: scrappy; state: Exp; lines: +3 -1
Add Y2K link for Alladin GhostScript...
v. 1.29
date: 1999/01/04 03:35:58; author: steve; state: Exp; lines: +2 -4
Fixup after repository copy.
v. 1.28
date: 1998/12/27 22:31:29; author: asami; state: Exp; lines: +3 -1
Mark this broken after repo copy.
v. 1.27
date: 1998/12/03 08:38:56; author: andreas; state: Exp; lines: +2 -2
update std font. Only the new font (symlink)
ghostscript-fonts-std-5.50.tar.gz points to
the newer font
ghostscript-fonts-std-5.10a.tar.gz points to
^-- !
in another directory on the ftp server.
v. 1.26
date: 1998/12/03 08:24:20; author: andreas; state: Exp; lines: +24 -26
*** empty log message ***
v. 1.25
date: 1998/12/01 09:59:46; author: asami; state: Exp; lines: +3 -3
Append ${WRKDIRPREFIX} in front of jpeg and png dir names.
v. 1.24
date: 1998/11/28 09:07:15; author: asami; state: Exp; lines: +2 -1
A few more USE_XLIBs.
v. 1.23
date: 1998/07/17 20:19:41; author: andreas; state: Exp; lines: +2 -2
update gs port after update of libpng port.
The version change produced a symlink in gs source directory
which pointed to an nonexistent directory under libpng port.
v. 1.22
date: 1998/06/05 06:21:03; author: andreas; state: Exp; lines: +3 -3
correct install target which broke port
v. 1.21
date: 1998/06/04 20:11:37; author: andreas; state: Exp; lines: +9 -4
- Update the additional hp850 driver to newest release 1.3
- Since the author decided to put a version number into his archive,
we can now safely fetch the file from his site.
- patch-ad is useless now
- updated the configure and configure.batch script, to show all possible
drivers
- install hp850 drivers license and readme file in the gs doc dir
- update the DESCR file, mention the two add on packages in this port
- The new driver supports the following additional printers:
Support for HP DeskJet 670, 690, 850, 855, 870, 890, 1100 and 1600,
See announcement on http://bonk.ethz.ch/hp850/hp850.html
Please note, that some of the drivers have certain restrictions
and produce huge output files ... Please read the release notes !!!
The author makes suggestions on his website, what driver to choose
if you need a fast printout, see
http://bonk.ethz.ch/hp850/hp850-readme.1.3.html
v. 1.20
date: 1998/04/19 18:34:50; author: andreas; state: Exp; lines: +2 -2
fix compilation problems after jpeg lib upgrade
v. 1.19
date: 1998/04/01 01:43:05; author: asami; state: Exp; lines: +2 -2
libpng upgrade changed directory name.
v. 1.18
date: 1998/03/03 02:13:00; author: jseger; state: Exp; lines: +2 -2
libpng-0.96 -> libpng-0.99e
v. 1.17
date: 1998/01/31 20:08:41; author: andreas; state: Exp; lines: +3 -3
my previous commit was possibly bogus ... here the real one.
v. 1.16
date: 1998/01/25 15:37:05; author: andreas; state: Exp; lines: +11 -6
FreeBSD-hardware mailinglist:
From: Jin Guojun (ITG staff)
BJC-240 in color mode is supported as well by the bjc600 and bjc800 driver.
BJC-240 b&w is supported by bj200. Added this to configure dialogue.
From: Luigi Rizzo :
Support for encrypted PDF files by replacing pdf_sec.ps with the
free and legal version from:
http://www.ozemail.com.au/~geoffk/pdfencrypt/pdf_sec.ps
Deceided to update the pathnames of font files for easier
maintenance, because they revamped their ftp archive structure
to "5.10/files".
Submitted by: various people
v. 1.15
date: 1998/01/03 08:34:31; author: andreas; state: Exp; lines: +6 -6
Upgrade to v 5.10, bugfix release concerning PDF ...
From the release notes: 5.10 is a special release to clear up
problems in the PDF writer (ps2pdf) affecting NSF's FastLane proposal
submission program: we have tested its output and verified
compatibility with the Acrobat software that NSF uses. Relative to
5.03, the only other changes in 5.10 are some improvements in the
PDF interpreter to handle more PDF 1.2 (Acrobat 3.x) constructs,
and a number of bug fixes.
v. 1.14
date: 1997/10/13 11:22:43; author: asami; state: Exp; lines: +3 -3
Add DEPENDS_TARGET of jpeg/png back as third argument in BUILD_DEPENDS
lines, needed separately now because unzip is also on the list.
Submitted by: msmith
v. 1.13
date: 1997/10/09 21:04:40; author: andreas; state: Exp; lines: +2 -2
cosmetic changes, changed MAINTAINER address to andreas@FreeBSD.ORG
v. 1.12
date: 1997/10/04 14:53:04; author: andreas; state: Exp; lines: +7 -9
cosmetic changes using portlint, a really nice tool ;-)
v. 1.11
date: 1997/09/04 14:57:14; author: andreas; state: Exp; lines: +2 -2
typo:
- unzip:${PORTSDIR}/archiver/unzip
+ unzip:${PORTSDIR}/archivers/unzip
Submitted by: Bernd Rosauer
v. 1.10
date: 1997/09/03 06:57:04; author: andreas; state: Exp; lines: +2 -2
Path changed on ftp server.
Version number bumped but withoout file change
Submitted by: Jeffrey Hsu
v. 1.9
date: 1997/09/02 16:48:55; author: andreas; state: Exp; lines: +2 -2
someone rearranged directory paths on alladins main ftp server
v. 1.8
date: 1997/08/27 16:00:04; author: andreas; state: Exp; lines: +2 -6
unzip -La converts to lowercase file names and strips away the messy
^M's ... rest in peace for the sed line .. ;-)
v. 1.7
date: 1997/08/27 06:52:42; author: andreas; state: Exp; lines: +15 -4
Included new driver version 1.2 for HP 850 printers and related ...
See: http://bonk.ethz.ch/hp850/hp850.html
Additional driver will be fetched directly from internet now
Because this driver source is packed as a .zip file (tada *sigh*)
and contains ^M's (where the combination \^M confuses gcc) we have
to BUILD_DEPEND on unzip and pipe the source and header files through
sed to wipe out the ^M's ...
As requested by: Lars Koeller
v. 1.6
date: 1997/08/24 14:36:24; author: andreas; state: Exp; lines: +13 -11
Upgrade to ghostscript 5.03
Makefile:
- Changed WRKSRC
- New GS_SOURCES
- Make symbolic link from jpeg-6a and libpng port's workdir into
WRKSRC, instead of patching unix-gcc.mak further:
ln -s ${PORTSDIR}/graphics/jpeg/work/jpeg-6a ${WRKSRC}/jpeg-6a
ln -s ${PORTSDIR}/graphics/png/work/libpng-0.96 ${WRKSRC}/libpng
- updated md5 files
patches/patch-aa:
- new unified diff because some of the above mentioned changes
- Only commented out the default DEVICE_DEVS
- make our zlib compile again
pkg/DESCR:
- bumped version number
pkg/PLIST:
- updated PLIST
- added proper @dirrm's for a successfull pkg_delete action
scripts/configure:
- added new drivers
"la70t" "DEC LA70 printer with low resol. text enhancement" ON \
"lq850" "EPSON LQ-850 (360x360), ok for Canon BJ300 in LQ850 emul" ON \
- rmoved one unnecessary "pdfwrite"
- same for scripts/configure.batch
As requested by: Lars Koeller ;-)
v. 1.5
date: 1997/07/13 18:49:28; author: max; state: Exp; lines: +3 -3
/bin/sh -> ${SH}
v. 1.4
date: 1997/06/14 09:36:28; author: andreas; state: Exp; lines: +11 -2
Major cleanup for ghostscript5 port.
- merged patch-af into patch-aa, both patches hacked unix-gcc.mak
- merged the scripts/{configure,configure.batch} changes into
patch-aa, so that unix-gcc.mak is hacked only by patch-aa
- when doing interactive configuration, every device driver is
now turned on, so you have to deselect devices
- when using BATCH compilation, you now get every supported device,
this one is especially for Satoshi, when making gs packages !
- Added a note into unix-gcc.mak, that DEVICE_DEVS now completely
are removed in the makefile, instead of this, the two configure
scripts now completely control, which devices have to be compiled in.
So, the configure target "patches" the unix-gcc.mak Makefile and
puts a DEVICE_DEVS line at line 1. When doing batch compilation
every device is included in this line, or the wanted devices ...
- The compilation option -DA4 is now included if you compile the port
by saying "make A4=yes".
I hope, I didn't forget a driver, look at that long line ;-)
BTW, I didn't create that DEVICE_DEVS line by hand, I did the
interactive installation, which created it automatically, and
after that I "stealed" that DEVICE_DEVS line for inclusion
into configure.batch ;-) So the devices in configure and configure.batch
are exactly the same, you only have to compare devices.mak with one
of the configure scripts.
BTW, should we nuke ghostscript4 ??? Does somebody know if any
port needs gs4 ???
v. 1.3
date: 1997/06/12 16:48:56; author: andreas; state: Exp; lines: +1 -2
removed unnecessary newline
v. 1.2
date: 1997/06/11 06:37:54; author: andreas; state: Exp; lines: +5 -3
- The package other fonts doesn't have the trailing fonts/ path,
so other-fonts were extracted into /usr/local/share/ghostscript
instead of /usr/local/share/ghostscript/fonts
- Corrected PLIST file
v. 1.1
date: 1997/06/11 06:20:46; author: andreas; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1997/06/11 06:20:46; author: andreas; state: Exp; lines: +0 -0
New ghostscript 5 port
=============================================================================
v. 1.125
date: 2007/09/24 08:39:21; author: rafan; state: Exp; lines: +1 -1
Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.
Approved by: portmgr (pav)
v. 1.124
date: 2007/08/03 21:46:53; author: mm; state: Exp; lines: +1 -1
- Replace USE_XLIB with USE_XORG (xt xext)
- Bump PORTREVISION
Tested by: pointyhat
Thanks to: pav (testing)
Approved by: garga (mentor, implicit)
v. 1.123
date: 2007/05/20 11:50:22; author: pav; state: Exp; lines: +0 -1
- Bump PORTREVISION for xorg72 import (automated tool got confused here)
Reported by: netchild
Approved by: portmgr (implicit)
v. 1.122
date: 2007/05/19 20:20:51; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.121
date: 2006/08/15 00:56:22; author: clsung; state: Exp; lines: +1 -1
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include misc/ multimedia/ net/ net-mgmt/ net-im/
net-p2p/ palm/ print/ science/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin
v. 1.120
date: 2006/05/31 16:24:03; author: novel; state: Exp; lines: +2 -2
Fix some typos in comments.
Submitted by: stefanf
v. 1.119
date: 2006/05/21 19:02:08; author: arved; state: Exp; lines: +3 -2
Fix fetch of eplaser distfile by putting a copy on MASTER_SITE_LOCAL
v. 1.118
date: 2006/05/13 01:03:12; author: edwin; state: Exp; lines: +0 -1
Remove USE_REINPLACE from all categories starting with P
v. 1.117
date: 2005/12/27 23:58:20; author: pav; state: Exp; lines: +2 -0
- Add conflicts
PR: ports/80491
Submitted by: LI Dong
v. 1.116
date: 2005/11/22 16:40:43; author: mnag; state: Exp; lines: +1 -1
Fix MASTER_SITES (pcl3-3.3.tar.gz)
PR: 89293
Notified by: diff
v. 1.115
date: 2005/06/08 10:54:10; author: barner; state: Exp; lines: +12 -49
- Update MASTER_SITES for MD2K driver
- Remove HPDJ driver completely (officially discontinued)
- Add KRGB support patch for IJS driver
- Bump GS_REVISION
Submitted by: KATO Tsuguru
Tested by: Jose M Rodriguez
PR: ports/81962
v. 1.114
date: 2005/06/06 15:13:23; author: barner; state: Exp; lines: +5 -3
- Update master site and homepage for PCL3 driver
- Add FIXME item noting that the HPDJ (predecessor of PCL3) has been
obsoleted by its author Martin Lottermoser.
v. 1.113
date: 2005/01/24 20:21:14; author: pav; state: Exp; lines: +1 -1
- Update gimp-print to 4.2.7
- Correct merge cups/pstoraster patches
PR: ports/76569
Submitted by: Jose M Rodriguez (freebsd)
v. 1.112
date: 2004/10/16 07:28:32; author: krion; state: Exp; lines: +1 -1
Announce the release of GPL Ghostscript. This release is based on
the AFPL Ghostscript 8.00 release of 14 months ago. The most
significant new feature since 7.0x is support for DeviceN
colorspaces, up to 8 colorants total at 8 bits per component. Also,
pdfwrite has seen considerable improvement in font handling, and
many other bug fixes.
PR: ports/72326
Submitted by: Ports Fury
v. 1.111
date: 2004/06/27 21:14:57; author: krion; state: Exp; lines: +1 -1
Fix package build
v. 1.110
date: 2004/06/27 18:13:39; author: krion; state: Exp; lines: +4 -3
Update EPLASER driver to version 3.1.4
PR: ports/68391
Submitted by: Ports Fury
v. 1.109
date: 2004/06/17 08:18:55; author: pav; state: Exp; lines: +1 -1
- Unify print/gsfonts dependency check
PR: ports/67999, ports/68035
Submitted by: Jose M Rodriguez
v. 1.108
date: 2004/06/14 14:02:09; author: nork; state: Exp; lines: +2 -2
Fix dependency on print/gsfonts.
Pointed out by: bento via kris, hrs
v. 1.107
date: 2004/06/13 12:36:20; author: nork; state: Exp; lines: +4 -10
o Remove ghostscript-fonts and Add dependency on print/gsfonts.
o Update gimp-print to 4.2.6.
o Fix implicit dependency on cups/ijs.
PR: ports/67574
Submitted by: Jose M Rodriguez
v. 1.106
date: 2004/05/09 18:26:18; author: krion; state: Exp; lines: +1 -1
- Fix MASTER_SITES
PR: ports/66398
Submitted by: Ports Fury
v. 1.105
date: 2004/04/10 17:26:47; author: trevor; state: Exp; lines: +2 -2
Tidy up whitespace.
v. 1.104
date: 2004/03/17 23:54:21; author: marcel; state: Exp; lines: +1 -1
s/pre-install/pre-su-install/ because we're creating directories under
${PREFIX}.
v. 1.103
date: 2004/02/04 05:08:34; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.102
date: 2004/01/12 14:34:03; author: krion; state: Exp; lines: +22 -35
- Replace HP2200 driver (currently unavailable at master site)
with HP8XX driver
- Update ghotscript-fonts-std to version 8.11
- Update EPLASER driver to version 3.1.4
- Fix minor bug in paparsize handling of LIPS driver
- Fix minor bug in Japanese vertical font support
PR: 61249
Submitted by: Ports Fury
v. 1.101
date: 2003/09/27 05:04:14; author: edwin; state: Exp; lines: +1 -1
Fix master_site for EPLASER files.
Noticed by: Adam McLaurin
v. 1.100
date: 2003/09/27 02:35:24; author: edwin; state: Exp; lines: +7 -7
Update port: print/ghostscript-gnu
- Update EPLASER driver to version 3.1.1
- Fix papersize handling of LIPS driver
- Enable hl1240/hl1250 driver by default configuration
PR: ports/57009
Submitted by: KATO Tsuguru
v. 1.99
date: 2003/07/26 23:26:50; author: nork; state: Exp; lines: +1 -1
Fix handling big post table and GSUB's Lookuplist
sub table. These problems cause that ghostscript
can't display with kochi-subst fonts.
PR: ports-jp/13949, ports-jp/13973
Reported by: Yoshihiko Sarumaru
Submitted by: KANOU Hiroki
Patched by: Akira TAGOH
v. 1.98
date: 2003/07/22 02:35:09; author: maho; state: Exp; lines: +0 -0
(forced commit)
Very sorry, thousand of apologizes...
I was in rush... and what I want to do is
forced commit to distinfo,
v. 1.97
date: 2003/07/22 02:28:58; author: maho; state: Exp; lines: +0 -0
My former commit to
This patch cope with the problem for bigger than 64 kb
the printer does not accept compressed data bands bigger than 64 kB
(gdevgdi-64k-bands-gtaylor.patch) is applied. So files not being
printed with the original driver will most probably be printed with
this version.
v. 1.96
date: 2003/07/21 13:41:52; author: arved; state: Exp; lines: +91 -91
Backout my previous commit and reenable .SILENT instead.
Take measures to cope with too frequent update (without version numbering)
of Samsung-SmartGDI driver
PR: 54708
Submitted by: KATO Tsuguru
v. 1.95
date: 2003/07/21 10:34:12; author: arved; state: Exp; lines: +88 -88
Add @'s before ECHO_MSGs.
v. 1.94
date: 2003/07/11 17:19:57; author: nork; state: Exp; lines: +5 -30
o Update GDI driver
o Replace NPDL driver (currently unavailable at master site)
with one included in LIPS driver
PR: ports/54103
Submitted by: Ports Fury
v. 1.93
date: 2003/07/11 16:14:50; author: nork; state: Exp; lines: +1 -1
Update URL for eplaser.
Reviewed by: Yoshihiko Sarumaru
v. 1.92
date: 2003/06/08 20:02:23; author: naddy; state: Exp; lines: +76 -5
Update to version 7.07.
PR: 52480
Submitted by: Ports Fury
v. 1.91
date: 2003/05/10 00:40:37; author: arved; state: Exp; lines: +1 -0
This port CONFLICTS with ghostscript-afpl*
v. 1.90
date: 2003/04/27 23:09:13; author: naddy; state: Exp; lines: +87 -73
Update to version 7.06.
PR: 51062
Submitted by: Ports Fury
v. 1.89
date: 2003/04/20 19:40:33; author: marcus; state: Exp; lines: +0 -1
Remove USE_GNOMENG.
v. 1.88
date: 2003/03/27 16:02:50; author: nork; state: Exp; lines: +1 -1
Bump PORTREVISION by previous commit.
And I forgot to mention that Support for EPSON LPC-9500.
v. 1.87
date: 2003/03/27 15:41:28; author: nork; state: Exp; lines: +6 -5
Eplaser update to 3.0.6.
PR: ports-jp/13600
Submitted by: Yoshihiko Sarumaru
v. 1.86
date: 2003/03/02 08:57:09; author: leeym; state: Exp; lines: +2 -1
- chown font files to root:wheel after extract them into datadir
- bump PORTREVISION
PR: 48821
Submitted by: Pat Lashley
v. 1.85
date: 2003/02/20 18:55:44; author: knu; state: Exp; lines: +1 -0
De-pkg-comment.
v. 1.84
date: 2002/11/10 16:47:41; author: lioux; state: Exp; lines: +0 -2
o Rollback PORTCOMMENT modifications while this feature's implementation
is better studied
o Turn PORTCOMMENT variable in Makefile back into pkg-comment files
Approved by: kris (portmgr hat),
portmgr, re (silence)
v. 1.83
date: 2002/11/06 22:46:37; author: adamw; state: Exp; lines: +2 -0
Use PORTCOMMENT in the Makefile, and whack the pkg-comment.
Approved by: pat
v. 1.82
date: 2002/10/07 01:17:24; author: ijliao; state: Exp; lines: +6 -1
- Wipe x11* items out from device config dialog when WITHOUT_X11 is defined
- Fix MASTER_SITES
PR: 43708
Submitted by: Ports Fury
v. 1.81
date: 2002/09/02 01:03:49; author: lioux; state: Exp; lines: +2 -1
Deploy USE_GNOMENG infrastructure
PR: 42302
Submitted by: Edwin Groothuis
v. 1.80
date: 2002/08/20 00:15:58; author: naddy; state: Exp; lines: +48 -1
Add back Gimp-Print (stp) driver support.
PR: 41800
Submitted by: Ports Fury
v. 1.79
date: 2002/08/17 21:36:29; author: naddy; state: Exp; lines: +26 -2
Add BJC250 driver.
PR: 41738
Submitted by: Ports Fury
v. 1.78
date: 2002/08/06 20:34:08; author: naddy; state: Exp; lines: +29 -60
- Spin off Gimp-Print driver.
- Update EPLASER driver to version 3.0.4.
- Update GDI driver.
PR: 41275
Submitted by: Ports Fury
v. 1.77
date: 2002/06/27 23:52:18; author: perky; state: Exp; lines: +5 -4
PERL -> REINPLACE_CMD
PR: 39706 39708 39709 39710
Submitted by: Scott Flatman
v. 1.76
date: 2002/05/10 03:15:18; author: ijliao; state: Exp; lines: +5 -42
Spin off HPIJS driver
PR: 37890, 37891
Submitted by: Ports Fury
v. 1.75
date: 2002/04/27 18:27:51; author: ijliao; state: Exp; lines: +34 -17
upgrade to 7.05
PR: 37501
Submitted by: Ports Fury
v. 1.74
date: 2002/04/20 15:38:25; author: ijliao; state: Exp; lines: +3 -3
- Update DISTNAME/MASTER_SITE of samsung-gdi driver
- Add workaround for the problem that ps2epsi doesn't work
PR: 37285
Submitted by: Ports Fury
v. 1.73
date: 2002/04/05 02:20:54; author: kuriyama; state: Exp; lines: +1 -0
Bump $PORTREVISION for previous commit (distfile changed).
Changes in gdevdj9.c include "both the Quality and the Duplex parameter
can be set using setpagedevice."
v. 1.72
date: 2002/04/04 02:03:08; author: kuriyama; state: Exp; lines: +364 -109
Upgrade to 6.53.
PR: ports/36674
Submitted by: KATO Tsuguru
v. 1.71
date: 2002/04/03 20:49:37; author: lioux; state: Exp; lines: +5 -5
o Fix breakage introduced in last rev:
- Comma operator does not work for {DIST,PATCH}FILES just yet,
re-arrange groups to achieve similar effect
Prompted by: John Hay
v. 1.70
date: 2002/04/02 21:38:47; author: lioux; state: Exp; lines: +13 -9
Complete deployment of MASTER_SITES:n
v. 1.69
date: 2002/03/09 00:27:21; author: trevor; state: Exp; lines: +14 -7
Sort some of the master sites.
v. 1.68
date: 2002/02/01 14:07:17; author: murray; state: Exp; lines: +1 -1
Bump PORTREVISION now that ps2epsi has been fixed.
Suggested by: bmah, will
v. 1.67
date: 2002/01/22 03:08:18; author: trevor; state: Exp; lines: +5 -5
Upgrade HPIJS (HP inkjet) driver to 1.0.2, featuring the latest
disclaimer technology (and allowing full-bleed printing on the
Photosmart 100), so increment PORTREVISION.
fix CAPS In Comment.
Invoke perl more specifically.
PR: 34140
Submitted by: KATO Tsuguru
v. 1.66
date: 2002/01/19 04:27:11; author: sf; state: Exp; lines: +3 -0
support CFLAGS/CXXFLAGS properly.
PR: 34026
Submitted by: KATO Tsuguru
v. 1.65
date: 2002/01/17 20:57:53; author: andreas; state: Exp; lines: +2 -5
Update HPIJS package from 1.0 to 1.0.1.
HP fixed "off-by-one error" in the HPIJS sources, that caused hpijs
to core dump at runtime, when being compiled with -O or -O2.
I confirmed, that everything works perfectly again with -O and -O2.
Bumped port revision, to flag this as an important change.
Thanks to David Suffield from HP who took our (and others) reports
seriously, fixed the bug and released the new HPIJS version.
v. 1.64
date: 2002/01/14 14:57:59; author: sf; state: Exp; lines: +3 -2
o fix build of HPinkjet driver.
o change WWW.
PR: 33798
Submitted by: KATO Tsuguru
v. 1.63
date: 2002/01/11 21:47:33; author: andreas; state: Exp; lines: +1 -1
- Fix hpijs 1.0 dumping core with the kind help of HP.
- Important fix, therefore PORTREVISION bumped.
background info: hpijs currently may not compiled with -O or -O2.
Simply leaving out any optimization (like it was default in prior
hpijs versions) cures the problem.
Many thanks to David Suffield from HP-Vancouver.
v. 1.62
date: 2002/01/01 14:07:39; author: dirk; state: Exp; lines: +1 -1
Fix build if ${PORTSDIR} is a symlink by finding jpeg's WRKSRC properly.
v. 1.61
date: 2001/12/27 16:47:05; author: lioux; state: Exp; lines: +63 -46
- Update Gimp-Print driver to version 4.2.0
- Update HPinkjet driver to version 1.0
- Better support for jpeg WRKDIR location
PR: 33061
Submitted by: KATO Tsuguru
v. 1.60
date: 2001/11/04 07:35:34; author: demon; state: Exp; lines: +5 -9
Update to 6.52
PR: 31724
Submitted by: KATO Tsuguru
v. 1.59
date: 2001/10/12 04:01:48; author: ijliao; state: Exp; lines: +10 -10
back out last commit
v. 1.58
date: 2001/10/11 11:01:42; author: ijliao; state: Exp; lines: +10 -10
DISTDIR/DIST_SUBDIR -> _DISTDIR
PR: 31174
Submitted by: Ports Fury
v. 1.57
date: 2001/10/06 17:24:19; author: lioux; state: Exp; lines: +29 -35
o style fixes
- deploy DATADIR/DOCSDIR
- don't use internal .mk work variables, rely on supported
ones
_DISTDIR -> DISTDIR/DIST_SUBDIR
o use for checking byte order instead of an
ARCH check
PR: 31078
Submitted by: KATO Tsuguru
v. 1.56
date: 2001/09/27 18:29:31; author: knu; state: Exp; lines: +2 -2
Perform one leftover s/DISTDIR/_DISTDIR/.
v. 1.55
date: 2001/09/27 18:02:57; author: knu; state: Exp; lines: +4 -4
Set DIST_SUBDIR=ghostscript, because this port requires lots of
distfiles with random names.
Suggested by: Andre Albsmeier
De-portlint while I'm here.
v. 1.54
date: 2001/09/12 17:05:47; author: knu; state: Exp; lines: +2 -2
Fix a compilation error when A4 is defined.
PR: 30522
Submitted by: KATO Tsuguru
v. 1.53
date: 2001/09/11 20:22:01; author: knu; state: Exp; lines: +1 -2
Remove duplicate PKGNAMESUFFIX lines I added.
v. 1.52
date: 2001/09/11 20:18:03; author: knu; state: Exp; lines: +2 -2
Use the :: operator for pre-everything.
Submitted by: Dan Langille
v. 1.51
date: 2001/09/11 19:12:18; author: knu; state: Exp; lines: +283 -39
** ghostscript55 has been repocopied to ghostscript-gnu **
Update to GNU Ghostscript 6.51.
PR: ports/29579
Submitted by: KATO Tsuguru
v. 1.50
date: 2001/09/11 02:59:06; author: ache; state: Exp; lines: +2 -2
Bump png major
v. 1.49
date: 2001/08/13 20:57:23; author: andreas; state: Exp; lines: +2 -2
change URL for pdfencrypt
PR: 27331
v. 1.48
date: 2001/07/06 10:35:13; author: andreas; state: Exp; lines: +2 -2
sorry, no time for maintenance, hand port over to ports team entirely
v. 1.47
date: 2001/06/20 05:11:51; author: obrien; state: Exp; lines: +3 -1
Make executive decision. `pkg_add -r ghostscript' will get you
version 6.x.
v. 1.46
date: 2000/09/11 19:07:36; author: andreas; state: Exp; lines: +9 -13
- Remove restriction of encrypted PDF support
- nonexistent -> NONEXISTENT
PR: 21082
Submitted by: tkato@prontomail.ne.jp
v. 1.45
date: 2000/08/24 21:20:29; author: andreas; state: Exp; lines: +18 -24
Update port: print/ghostscript55 to 5.50a
Thanks for port submission !
PR: 20266
Submitted by: tkato@prontomail.ne.jp
v. 1.44
date: 2000/07/26 07:43:48; author: sobomax; state: Exp; lines: +2 -2
Create ${WRKSRC} --> ${WRKDIR}/libpng sysmlink and use it in ghostscript ports
instead of hardcoded ${WRKSRC}/libpng-png.version.number.
v. 1.43
date: 2000/07/04 07:12:49; author: sobomax; state: Exp; lines: +2 -2
Bump png shared library version.
Submitted by: Hajimu UMEMOTO
v. 1.42
date: 2000/04/09 17:49:42; author: cpiazza; state: Exp; lines: +4 -4
Accidental whitespace
v. 1.41
date: 2000/04/09 17:40:12; author: cpiazza; state: Exp; lines: +3 -3
Update with the new PORTNAME/PORTVERSION variables
v. 1.40
date: 2000/02/13 17:33:57; author: andreas; state: Exp; lines: +2 -2
tabify
v. 1.39
date: 2000/02/13 17:07:38; author: andreas; state: Exp; lines: +14 -9
- Disable encrypted PDF support by default (because of possible
export restrictions)
- tar -> TAR
PR: 16667
Submitted by: KATO Tsuguro
v. 1.38
date: 1999/11/26 16:25:06; author: andreas; state: Exp; lines: +2 -2
link false after upgrade of libpng from 1.0.3 to 1.0.5
Submitted by: Dominik Brettnacher
v. 1.37
date: 1999/11/26 03:00:40; author: jseger; state: Exp; lines: +2 -2
png-1.0.3 -> png-1.0.5
Submitted by: Christian Weisgerber
PR: ports/15052
v. 1.36
date: 1999/08/31 06:49:49; author: mharo; state: Exp; lines: +2 -2
FreeBSD.ORG -> FreeBSD.org
Prompted by PR: 13476, 13477
Submitted by: KATO Tsuguru
v. 1.35
date: 1999/08/31 01:44:47; author: peter; state: Exp; lines: +1 -1
$Id$ -> $FreeBSD$
v. 1.34
date: 1999/07/15 21:53:13; author: asami; state: Exp; lines: +3 -3
Assorted ${WRKDIRPREFIX}/symlink ${PORTSDIR} fixes. mbone/vat still doesn't
build but at least it will have a better chance.
v. 1.33
date: 1999/05/15 01:14:34; author: andreas; state: Exp; lines: +3 -1
unix-lpr.sh and lprsetup.sh are missing from the package.
fixed install target and PLIST file.
Reported by: Marko Schuetz
v. 1.32
date: 1999/01/23 07:05:22; author: vanilla; state: Exp; lines: +2 -2
Bump png's major number to 3.
v. 1.31
date: 1999/01/21 18:08:50; author: vanilla; state: Exp; lines: +2 -2
png's version is 1.0.3 now.
v. 1.30
date: 1999/01/13 07:24:57; author: scrappy; state: Exp; lines: +3 -1
Add Y2K link for Alladin GhostScript...
v. 1.29
date: 1999/01/04 03:35:58; author: steve; state: Exp; lines: +2 -4
Fixup after repository copy.
v. 1.28
date: 1998/12/27 22:31:29; author: asami; state: Exp; lines: +3 -1
Mark this broken after repo copy.
v. 1.27
date: 1998/12/03 08:38:56; author: andreas; state: Exp; lines: +2 -2
update std font. Only the new font (symlink)
ghostscript-fonts-std-5.50.tar.gz points to
the newer font
ghostscript-fonts-std-5.10a.tar.gz points to
^-- !
in another directory on the ftp server.
v. 1.26
date: 1998/12/03 08:24:20; author: andreas; state: Exp; lines: +24 -26
*** empty log message ***
v. 1.25
date: 1998/12/01 09:59:46; author: asami; state: Exp; lines: +3 -3
Append ${WRKDIRPREFIX} in front of jpeg and png dir names.
v. 1.24
date: 1998/11/28 09:07:15; author: asami; state: Exp; lines: +2 -1
A few more USE_XLIBs.
v. 1.23
date: 1998/07/17 20:19:41; author: andreas; state: Exp; lines: +2 -2
update gs port after update of libpng port.
The version change produced a symlink in gs source directory
which pointed to an nonexistent directory under libpng port.
v. 1.22
date: 1998/06/05 06:21:03; author: andreas; state: Exp; lines: +3 -3
correct install target which broke port
v. 1.21
date: 1998/06/04 20:11:37; author: andreas; state: Exp; lines: +9 -4
- Update the additional hp850 driver to newest release 1.3
- Since the author decided to put a version number into his archive,
we can now safely fetch the file from his site.
- patch-ad is useless now
- updated the configure and configure.batch script, to show all possible
drivers
- install hp850 drivers license and readme file in the gs doc dir
- update the DESCR file, mention the two add on packages in this port
- The new driver supports the following additional printers:
Support for HP DeskJet 670, 690, 850, 855, 870, 890, 1100 and 1600,
See announcement on http://bonk.ethz.ch/hp850/hp850.html
Please note, that some of the drivers have certain restrictions
and produce huge output files ... Please read the release notes !!!
The author makes suggestions on his website, what driver to choose
if you need a fast printout, see
http://bonk.ethz.ch/hp850/hp850-readme.1.3.html
v. 1.20
date: 1998/04/19 18:34:50; author: andreas; state: Exp; lines: +2 -2
fix compilation problems after jpeg lib upgrade
v. 1.19
date: 1998/04/01 01:43:05; author: asami; state: Exp; lines: +2 -2
libpng upgrade changed directory name.
v. 1.18
date: 1998/03/03 02:13:00; author: jseger; state: Exp; lines: +2 -2
libpng-0.96 -> libpng-0.99e
v. 1.17
date: 1998/01/31 20:08:41; author: andreas; state: Exp; lines: +3 -3
my previous commit was possibly bogus ... here the real one.
v. 1.16
date: 1998/01/25 15:37:05; author: andreas; state: Exp; lines: +11 -6
FreeBSD-hardware mailinglist:
From: Jin Guojun (ITG staff)
BJC-240 in color mode is supported as well by the bjc600 and bjc800 driver.
BJC-240 b&w is supported by bj200. Added this to configure dialogue.
From: Luigi Rizzo :
Support for encrypted PDF files by replacing pdf_sec.ps with the
free and legal version from:
http://www.ozemail.com.au/~geoffk/pdfencrypt/pdf_sec.ps
Deceided to update the pathnames of font files for easier
maintenance, because they revamped their ftp archive structure
to "5.10/files".
Submitted by: various people
v. 1.15
date: 1998/01/03 08:34:31; author: andreas; state: Exp; lines: +6 -6
Upgrade to v 5.10, bugfix release concerning PDF ...
From the release notes: 5.10 is a special release to clear up
problems in the PDF writer (ps2pdf) affecting NSF's FastLane proposal
submission program: we have tested its output and verified
compatibility with the Acrobat software that NSF uses. Relative to
5.03, the only other changes in 5.10 are some improvements in the
PDF interpreter to handle more PDF 1.2 (Acrobat 3.x) constructs,
and a number of bug fixes.
v. 1.14
date: 1997/10/13 11:22:43; author: asami; state: Exp; lines: +3 -3
Add DEPENDS_TARGET of jpeg/png back as third argument in BUILD_DEPENDS
lines, needed separately now because unzip is also on the list.
Submitted by: msmith
v. 1.13
date: 1997/10/09 21:04:40; author: andreas; state: Exp; lines: +2 -2
cosmetic changes, changed MAINTAINER address to andreas@FreeBSD.ORG
v. 1.12
date: 1997/10/04 14:53:04; author: andreas; state: Exp; lines: +7 -9
cosmetic changes using portlint, a really nice tool ;-)
v. 1.11
date: 1997/09/04 14:57:14; author: andreas; state: Exp; lines: +2 -2
typo:
- unzip:${PORTSDIR}/archiver/unzip
+ unzip:${PORTSDIR}/archivers/unzip
Submitted by: Bernd Rosauer
v. 1.10
date: 1997/09/03 06:57:04; author: andreas; state: Exp; lines: +2 -2
Path changed on ftp server.
Version number bumped but withoout file change
Submitted by: Jeffrey Hsu
v. 1.9
date: 1997/09/02 16:48:55; author: andreas; state: Exp; lines: +2 -2
someone rearranged directory paths on alladins main ftp server
v. 1.8
date: 1997/08/27 16:00:04; author: andreas; state: Exp; lines: +2 -6
unzip -La converts to lowercase file names and strips away the messy
^M's ... rest in peace for the sed line .. ;-)
v. 1.7
date: 1997/08/27 06:52:42; author: andreas; state: Exp; lines: +15 -4
Included new driver version 1.2 for HP 850 printers and related ...
See: http://bonk.ethz.ch/hp850/hp850.html
Additional driver will be fetched directly from internet now
Because this driver source is packed as a .zip file (tada *sigh*)
and contains ^M's (where the combination \^M confuses gcc) we have
to BUILD_DEPEND on unzip and pipe the source and header files through
sed to wipe out the ^M's ...
As requested by: Lars Koeller
v. 1.6
date: 1997/08/24 14:36:24; author: andreas; state: Exp; lines: +13 -11
Upgrade to ghostscript 5.03
Makefile:
- Changed WRKSRC
- New GS_SOURCES
- Make symbolic link from jpeg-6a and libpng port's workdir into
WRKSRC, instead of patching unix-gcc.mak further:
ln -s ${PORTSDIR}/graphics/jpeg/work/jpeg-6a ${WRKSRC}/jpeg-6a
ln -s ${PORTSDIR}/graphics/png/work/libpng-0.96 ${WRKSRC}/libpng
- updated md5 files
patches/patch-aa:
- new unified diff because some of the above mentioned changes
- Only commented out the default DEVICE_DEVS
- make our zlib compile again
pkg/DESCR:
- bumped version number
pkg/PLIST:
- updated PLIST
- added proper @dirrm's for a successfull pkg_delete action
scripts/configure:
- added new drivers
"la70t" "DEC LA70 printer with low resol. text enhancement" ON \
"lq850" "EPSON LQ-850 (360x360), ok for Canon BJ300 in LQ850 emul" ON \
- rmoved one unnecessary "pdfwrite"
- same for scripts/configure.batch
As requested by: Lars Koeller ;-)
v. 1.5
date: 1997/07/13 18:49:28; author: max; state: Exp; lines: +3 -3
/bin/sh -> ${SH}
v. 1.4
date: 1997/06/14 09:36:28; author: andreas; state: Exp; lines: +11 -2
Major cleanup for ghostscript5 port.
- merged patch-af into patch-aa, both patches hacked unix-gcc.mak
- merged the scripts/{configure,configure.batch} changes into
patch-aa, so that unix-gcc.mak is hacked only by patch-aa
- when doing interactive configuration, every device driver is
now turned on, so you have to deselect devices
- when using BATCH compilation, you now get every supported device,
this one is especially for Satoshi, when making gs packages !
- Added a note into unix-gcc.mak, that DEVICE_DEVS now completely
are removed in the makefile, instead of this, the two configure
scripts now completely control, which devices have to be compiled in.
So, the configure target "patches" the unix-gcc.mak Makefile and
puts a DEVICE_DEVS line at line 1. When doing batch compilation
every device is included in this line, or the wanted devices ...
- The compilation option -DA4 is now included if you compile the port
by saying "make A4=yes".
I hope, I didn't forget a dri |
| |
|