The FreeBSD Ports Archive
FreeBSD palm  : synce-kde
SynCE KDE Utilities
SynCE is a project for connecting to devices running Windows CE or Pocket PC.
Synce-KDE provides KDE users transparent access to the files and information
on their Windows CE device as if it were a local folder. It also provides
a system tray application and PDA connection manager.
http://synce.sourceforge.net/
|
synce-kde history
v. 1.19
date: 2007/06/29 16:29:18; author: araujo; state: Exp; lines: +1 -1
- Change my mail address to araujo@.
Approved by: stas (mentor)
v. 1.18
date: 2007/05/19 20:20:27; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.17
date: 2007/02/12 20:27:09; author: anray; state: Exp; lines: +1 -2
Remove not needed dccm from RUN_DEPENDS. Internal vdccm is generalization of
dccm.
Reported by: pointyhat via kris, pav
v. 1.16
date: 2007/01/07 12:44:07; author: itetcu; state: Exp; lines: +6 -3
- update to 0.9.1 [1]
-pass maintainership to submitter [1]
PR: ports/107598 [1]
Submitted by: Marcelo Araujo [1]
v. 1.15
date: 2006/02/23 10:38:41; author: ade; state: Exp; lines: +1 -2
Conversion to a single libtool environment.
Approved by: portmgr (kris)
v. 1.14
date: 2005/11/15 06:50:46; author: ade; state: Exp; lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
v. 1.13
date: 2005/11/05 05:21:16; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION to chase the glib20 shared library update.
v. 1.12
date: 2005/10/29 04:24:59; author: lawrance; state: Exp; lines: +1 -1
Drop maintainership since I no longer have a pocket pc. I'll be keeping
an eye on these, especially uppc-kmod in case anyone wants to take it over
and keep it working.
v. 1.11
date: 2005/04/12 13:00:31; author: lawrance; state: Exp; lines: +1 -1
Set my ports to their shiny new MAINTAINER address.
Approved by: clement (mentor)
v. 1.10
date: 2005/04/12 03:26:22; author: obrien; state: Exp; lines: +1 -1
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
v. 1.9
date: 2005/04/11 08:03:45; author: obrien; state: Exp; lines: +1 -1
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
v. 1.8
date: 2005/03/12 10:52:33; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION to chase the glib20 shared lib version change.
v. 1.7
date: 2005/01/14 02:15:15; author: edwin; state: Exp; lines: +17 -6
[maintainer] palm/synce-kde: update to 0.8.0; transform from rapip
Transform the ageing rapip into shiny synce-kde 0.8.0
PR: ports/76058
Submitted by: Sam Lawrance
v. 1.6
date: 2004/11/11 23:22:25; author: lofi; state: Exp; lines: +1 -1
More pthread-check fixes.
v. 1.5
date: 2004/07/09 17:42:44; author: marcus; state: Exp; lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
v. 1.4
date: 2004/04/05 03:29:55; author: marcus; state: Exp; lines: +1 -1
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
v. 1.3
date: 2004/03/14 06:17:12; author: ade; state: Exp; lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
v. 1.2
date: 2004/02/04 05:08:31; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.1
date: 2003/08/01 15:17:58; author: arved; state: Exp;
Add rapip, a kio-slave that provides transparent filesystem access to
a Windows CE device for KDE applications.
PR: 53333
Submitted by: Sam Lawrance
=============================================================================
v. 1.19
date: 2007/06/29 16:29:18; author: araujo; state: Exp; lines: +1 -1
- Change my mail address to araujo@.
Approved by: stas (mentor)
v. 1.18
date: 2007/05/19 20:20:27; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.17
date: 2007/02/12 20:27:09; author: anray; state: Exp; lines: +1 -2
Remove not needed dccm from RUN_DEPENDS. Internal vdccm is generalization of
dccm.
Reported by: pointyhat via kris, pav
v. 1.16
date: 2007/01/07 12:44:07; author: itetcu; state: Exp; lines: +6 -3
- update to 0.9.1 [1]
-pass maintainership to submitter [1]
PR: ports/107598 [1]
Submitted by: Marcelo Araujo [1]
v. 1.15
date: 2006/02/23 10:38:41; author: ade; state: Exp; lines: +1 -2
Conversion to a single libtool environment.
Approved by: portmgr (kris)
v. 1.14
date: 2005/11/15 06:50:46; author: ade; state: Exp; lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
v. 1.13
date: 2005/11/05 05:21:16; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION to chase the glib20 shared library update.
v. 1.12
date: 2005/10/29 04:24:59; author: lawrance; state: Exp; lines: +1 -1
Drop maintainership since I no longer have a pocket pc. I'll be keeping
an eye on these, especially uppc-kmod in case anyone wants to take it over
and keep it working.
v. 1.11
date: 2005/04/12 13:00:31; author: lawrance; state: Exp; lines: +1 -1
Set my ports to their shiny new MAINTAINER address.
Approved by: clement (mentor)
v. 1.10
date: 2005/04/12 03:26:22; author: obrien; state: Exp; lines: +1 -1
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
v. 1.9
date: 2005/04/11 08:03:45; author: obrien; state: Exp; lines: +1 -1
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
v. 1.8
date: 2005/03/12 10:52:33; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION to chase the glib20 shared lib version change.
v. 1.7
date: 2005/01/14 02:15:15; author: edwin; state: Exp; lines: +17 -6
[maintainer] palm/synce-kde: update to 0.8.0; transform from rapip
Transform the ageing rapip into shiny synce-kde 0.8.0
PR: ports/76058
Submitted by: Sam Lawrance
v. 1.6
date: 2004/11/11 23:22:25; author: lofi; state: Exp; lines: +1 -1
More pthread-check fixes.
v. 1.5
date: 2004/07/09 17:42:44; author: marcus; state: Exp; lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
v. 1.4
date: 2004/04/05 03:29:55; author: marcus; state: Exp; lines: +1 -1
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
v. 1.3
date: 2004/03/14 06:17:12; author: ade; state: Exp; lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
v. 1.2
date: 2004/02/04 05:08:31; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.1
date: 2003/08/01 15:17:58; author: arved; state: Exp;
Add rapip, a kio-slave that provides transparent filesystem access to
a Windows CE device for KDE applications.
PR: 53333
Submitted by: Sam Lawrance
=============================================================================
v. 1.19
date: 2007/06/29 16:29:18; author: araujo; state: Exp; lines: +1 -1
- Change my mail address to araujo@.
Approved by: stas (mentor)
v. 1.18
date: 2007/05/19 20:20:27; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.17
date: 2007/02/12 20:27:09; author: anray; state: Exp; lines: +1 -2
Remove not needed dccm from RUN_DEPENDS. Internal vdccm is generalization of
dccm.
Reported by: pointyhat via kris, pav
v. 1.16
date: 2007/01/07 12:44:07; author: itetcu; state: Exp; lines: +6 -3
- update to 0.9.1 [1]
-pass maintainership to submitter [1]
PR: ports/107598 [1]
Submitted by: Marcelo Araujo [1]
v. 1.15
date: 2006/02/23 10:38:41; author: ade; state: Exp; lines: +1 -2
Conversion to a single libtool environment.
Approved by: portmgr (kris)
v. 1.14
date: 2005/11/15 06:50:46; author: ade; state: Exp; lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
v. 1.13
date: 2005/11/05 05:21:16; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION to chase the glib20 shared library update.
v. 1.12
date: 2005/10/29 04:24:59; author: lawrance; state: Exp; lines: +1 -1
Drop maintainership since I no longer have a pocket pc. I'll be keeping
an eye on these, especially uppc-kmod in case anyone wants to take it over
and keep it working.
v. 1.11
date: 2005/04/12 13:00:31; author: lawrance; state: Exp; lines: +1 -1
Set my ports to their shiny new MAINTAINER address.
Approved by: clement (mentor)
v. 1.10
date: 2005/04/12 03:26:22; author: obrien; state: Exp; lines: +1 -1
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
v. 1.9
date: 2005/04/11 08:03:45; author: obrien; state: Exp; lines: +1 -1
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
v. 1.8
date: 2005/03/12 10:52:33; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION to chase the glib20 shared lib version change.
v. 1.7
date: 2005/01/14 02:15:15; author: edwin; state: Exp; lines: +17 -6
[maintainer] palm/synce-kde: update to 0.8.0; transform from rapip
Transform the ageing rapip into shiny synce-kde 0.8.0
PR: ports/76058
Submitted by: Sam Lawrance
v. 1.6
date: 2004/11/11 23:22:25; author: lofi; state: Exp; lines: +1 -1
More pthread-check fixes.
v. 1.5
date: 2004/07/09 17:42:44; author: marcus; state: Exp; lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
v. 1.4
date: 2004/04/05 03:29:55; author: marcus; state: Exp; lines: +1 -1
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
v. 1.3
date: 2004/03/14 06:17:12; author: ade; state: Exp; lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
v. 1.2
date: 2004/02/04 05:08:31; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.1
date: 2003/08/01 15:17:58; author: arved; state: Exp;
Add rapip, a kio-slave that provides transparent filesystem access to
a Windows CE device for KDE applications.
PR: 53333
Submitted by: Sam Lawrance
=============================================================================
|
| |
|