The FreeBSD Ports Archive
FreeBSD palm  : gnome-pilot
PalmPilot conduit system for GNOME 2
Gnome-pilot is a package with a daemon that monitors for pilot
connects on one or more devices. It has a conduit system, and is
accompanied by a few conduits, basically for installing files
and backing up db's from the pilot.
http://www.gnome.org/gnome-office/
|
gnome-pilot history
v. 1.76
date: 2007/10/24 23:36:25; author: marcus; state: Exp; lines: +1 -1
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
their work on porting modules and testing the whole ball of wax on
pointyhat (respectively).
The FreeBSD GNOME team would also like to thank our various testers and
contributors:
Yasuda Keisuke
Frank Jahnke
Pawel Worach
Brian Gruber
Franz Klammer
Yuri Pankov
Nick Barkas
Cristian KLEIN
Tony Maher
Scot Hetzel
Martin Matuska (mm)
Benoit Dejean
Martin Wilke (miwi)
(And anyone else I may have missed)
PRs fixed in this release:
111272, 113470, 115995, 116338
v. 1.75
date: 2007/07/23 09:36:23; author: rafan; state: Exp; lines: +1 -2
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
v. 1.74
date: 2007/05/19 20:20:23; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.73
date: 2006/11/23 05:56:32; author: marcus; state: Exp; lines: +3 -3
Update to 2.0.15.
v. 1.72
date: 2006/11/05 03:40:47; author: mezz; state: Exp; lines: +1 -1
INSTALLS_SHLIB -> USE_LDCONFIG.
Found by: portlint (cports.sh)
v. 1.71
date: 2006/09/25 03:03:06; author: mezz; state: Exp; lines: +2 -1
Chase pilot-link's shared library version bump. Bump the PORTREVISION. As for
the PRs, I shall chase and close a few of them.
Pointyhat: ijliao
v. 1.70
date: 2006/09/06 21:53:31; author: marcus; state: Exp; lines: +4 -6
Update to 2.0.14.
v. 1.69
date: 2006/05/28 13:17:38; author: pav; state: Exp; lines: +1 -1
- Rename ports
palm/gnomepilot2 -> palm/gnome-pilot
palm/gnomepilot-conduits2 -> palm/gnome-pilot-conduits
v. 1.68
date: 2006/05/15 22:23:00; author: mezz; state: Exp; lines: +1 -0
Add USE_GETTEXT to appease portlint.
v. 1.67
date: 2006/02/23 10:38:40; author: ade; state: Exp; lines: +2 -2
Conversion to a single libtool environment.
Approved by: portmgr (kris)
v. 1.66
date: 2005/11/15 06:50:45; author: ade; state: Exp; lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
v. 1.65
date: 2005/11/05 05:21:00; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION to chase the glib20 shared library update.
v. 1.64
date: 2005/04/27 04:00:26; author: bland; state: Exp; lines: +1 -1
Add USB devices support for 5.x.
Submitted by: Corey Smith
v. 1.63
date: 2005/04/22 03:54:45; author: marcus; state: Exp; lines: +1 -1
Commit a patch forgotten in the last commit:
Link the gnome-pilot libraries correctly so they play nice with the new
pkg-config.
Reminded by: bland
v. 1.62
date: 2005/04/22 01:06:47; author: marcus; state: Exp; lines: +1 -0
Link the gnome-pilot libraries correctly so they play nice with the new
pkg-config.
Reported by: Sven Esbjerg
v. 1.61
date: 2005/04/10 18:25:50; author: marcus; state: Exp; lines: +1 -2
Update to 2.0.13.
v. 1.60
date: 2005/03/12 10:53:07; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION to chase the glib20 shared lib version change.
v. 1.59
date: 2004/11/23 19:33:07; author: mezz; state: Exp; lines: +1 -0
Use new GCONF_SCHEMAS.
Approved by: pav
v. 1.58
date: 2004/11/23 02:23:04; author: mezz; state: Exp; lines: +1 -0
Use new INSTALLS_OMF.
Approved by: bland, kwm, marcus and pav
v. 1.57
date: 2004/11/07 22:37:07; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.
v. 1.56
date: 2004/09/03 18:51:03; author: marcus; state: Exp; lines: +1 -1
Update to 2.0.12.
v. 1.55
date: 2004/08/28 12:36:43; author: adamw; state: Exp; lines: +1 -1
Use intlhack.
v. 1.54
date: 2004/08/27 05:09:42; author: marcus; state: Exp; lines: +2 -3
Update to 2.0.11.
v. 1.53
date: 2004/07/28 14:36:30; author: adamw; state: Exp; lines: +1 -1
Move a bunch of now unique stuff out of gnomehier and into
the ports that really own the directories.
v. 1.52
date: 2004/07/09 17:42:44; author: marcus; state: Exp; lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
v. 1.51
date: 2004/04/05 03:30:57; author: marcus; state: Exp; lines: +1 -1
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
v. 1.50
date: 2004/03/14 06:17:12; author: ade; state: Exp; lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
v. 1.49
date: 2004/02/04 05:08:30; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.48
date: 2003/11/17 12:29:03; author: trevor; state: Exp; lines: +0 -1
USE_REINPLACE need be defined only when REINPLACE_CMD is used.
v. 1.47
date: 2003/07/17 03:23:05; author: adamw; state: Exp; lines: +1 -1
Update to 2.0.10.
v. 1.46
date: 2003/06/12 09:46:03; author: adamw; state: Exp; lines: +0 -4
Remove REINPLACE commands that were rolled into gnomehack.
v. 1.45
date: 2003/05/19 23:42:34; author: marcus; state: Exp; lines: +3 -2
Update to 2.0.9.
v. 1.44
date: 2003/05/07 00:44:47; author: marcus; state: Exp; lines: +1 -1
Update to 2.0.8.
v. 1.43
date: 2003/05/03 22:05:54; author: marcus; state: Exp; lines: +1 -1
Update to 2.0.7.
v. 1.42
date: 2003/04/30 05:19:59; author: marcus; state: Exp; lines: +2 -2
Update to 2.0.6.
v. 1.41
date: 2003/04/20 19:39:10; author: marcus; state: Exp; lines: +0 -1
Remove USE_GNOMENG.
v. 1.40
date: 2003/04/15 01:14:59; author: marcus; state: Exp; lines: +3 -4
* Update to 2.0.5
* Convert to new GNOME infrastructure
v. 1.39
date: 2003/03/30 23:33:05; author: marcus; state: Exp; lines: +2 -1
Add missing pisock dependency.
v. 1.38
date: 2003/03/30 23:13:33; author: marcus; state: Exp; lines: +11 -14
Add gnomepilot2 after a repo copy from gnomepilot. gnomepilot2 is the
PalmOS conduit system for GNOME 2.
v. 1.37
date: 2003/03/07 06:08:05; author: ade; state: Exp; lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.36
date: 2003/01/01 19:10:33; author: marcus; state: Exp; lines: +1 -2
Update to 0.1.71.
v. 1.35
date: 2002/12/13 16:13:30; author: marcus; state: Exp; lines: +2 -0
Adda RUN_DEPENDS on gnomecontrolcenter. This will allow GNOME 2 users to
fully configure the Palm settings and conduits.
Approved by: portmgr (knu)
v. 1.34
date: 2002/11/09 06:11:45; author: marcus; state: Exp; lines: +1 -1
Update to 0.1.69.
v. 1.33
date: 2002/10/25 02:22:03; author: marcus; state: Exp; lines: +1 -2
Update to 0.1.67.
v. 1.32
date: 2002/09/20 17:07:12; author: marcus; state: Exp; lines: +1 -1
GNOME has just changed the layout of their FTP site. This resulted in
making all the distfiles unfetachable. Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.
v. 1.31
date: 2002/09/17 16:35:38; author: marcus; state: Exp; lines: +2 -1
Chase the pisock shared lib version number. Note, this new version may
break some of these ports, but they're definitely broken without this.
v. 1.30
date: 2002/07/11 17:16:01; author: sobomax; state: Exp; lines: +5 -6
Convert all core GNOME1 components and some of the most popular GNOME1
apps to bsd.gnomeng.mk. The goal is to make GNOME1 framework more modular,
which will allow to use GNOME1 apps with GNOME2 desktop as well as considerably
reduce langht of dependency chains for GNOME1 ports (for example after this
commit AbiWord's dependency chain was reduced by 7 ports from 57 to only
50, while Gnumeric's - from 60 to 53 and so on).
The most of the GNOME1 apps are still not converted, so that lot of work is
still ahead.
Please report any unusual problems to gnome@FreeBSD.org.
Discussed with: marcus
Reviewed by: marcus
v. 1.29
date: 2002/04/25 17:15:06; author: sobomax; state: Exp; lines: +7 -3
Update to 0.1.65.
v. 1.28
date: 2002/01/07 00:36:42; author: sobomax; state: Exp; lines: +2 -3
Now pisock shared library is in the ${LOCALBASE}/lib, move pilot-link from
{BUILD,RUN}_DEPENDS into LIB_DEPENDS (partially revert 1.26).
v. 1.27
date: 2002/01/05 08:57:29; author: will; state: Exp; lines: +3 -3
Make pilot-link install directly into PREFIX. This should allow
pilot-link and all dependents to build correctly on bento.
v. 1.26
date: 2001/12/19 10:17:28; author: sobomax; state: Exp; lines: +3 -2
Move pilot-link from LIB_DEPENDS to {BUILD,RUN}_DEPENDS, because when building
on bento ${LOCALBASE}/pilot/lib not in the ldconfig(8) search path.
Submitted by: bento
v. 1.25
date: 2001/12/06 09:18:50; author: sobomax; state: Exp; lines: +1 -1
Update to 0.1.64.
PR: 32503
Submitted by: Hendrik Scholz
v. 1.24
date: 2001/12/03 09:46:28; author: sobomax; state: Exp; lines: +3 -3
Update to 0.1.63.
PR: 32428
Submitted by: Chia-liang Kao
v. 1.23
date: 2001/08/31 12:36:00; author: sobomax; state: Exp; lines: +2 -2
pisock.3 --> pisock.4 in LIB_DEPENDS.
Submitted by: bento
v. 1.22
date: 2001/05/11 16:36:31; author: ade; state: Exp; lines: +2 -2
SWitch maintainership of core GNOME ports to a small group of
committers (gnome@FreeBSD.org), since this is now definitely too big
for just one person.
v. 1.21
date: 2001/05/04 21:41:21; author: ade; state: Exp; lines: +3 -4
Various patches (mainly shared library v. changes) for those
ports that depend on GNOME and need to change for 1.4
v. 1.20
date: 2001/03/29 16:34:32; author: sobomax; state: Exp; lines: +2 -2
-pthread --> ${PTHREAD_LIBS}
-D_THREAD_SAFE --> ${PTHREAD_CFLAGS}
Note: my first intention was to test this out on bento/beta, but per ade's
requiest I opted to do it quickly.
v. 1.19
date: 2000/10/05 07:17:15; author: reg; state: Exp; lines: +5 -12
Implement USE_GNOME, part 2.
v. 1.18
date: 2000/08/04 16:11:24; author: ade; state: Exp; lines: +2 -2
Re-sobomize to use pre-patch instead of post-extract
Wrists slapped by: knu, sheldon
v. 1.17
date: 2000/08/04 01:34:28; author: ade; state: Exp; lines: +8 -1
Extensive patchfile cleanups using sobomax's wonderful
post-extract rule
v. 1.16
date: 2000/07/11 23:14:33; author: ade; state: Exp; lines: +3 -2
gnomepilot (and the conduits) have been available across
the GNOME mirrors for a while now. Fix MASTER_SITES accordingly.
v. 1.15
date: 2000/07/11 22:02:20; author: ade; state: Exp; lines: +2 -2
Update for new devel/libglade shlib version
v. 1.14
date: 2000/06/16 21:52:39; author: asami; state: Exp; lines: +2 -2
Rename INSTALLS_SHLIBS to INSTALLS_SHLIB. (There was a typo in the
previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
Line up the rhs of variable assignments nicely. Remove a couple of extra
whitespaces while I'm here.
Suggested by: sobomax
v. 1.13
date: 2000/06/16 10:38:02; author: sobomax; state: Exp; lines: +2 -1
Final round of the INSTALLS_SHLIBS=yes conversion. Few remaining ports with
ldconfig in PLIST need personal consideration.
v. 1.12
date: 2000/06/15 22:36:32; author: ade; state: Exp; lines: +3 -2
Add devel/libglade dependency
Problem pointed out by: Roman Shterenzon
v. 1.11
date: 2000/06/10 16:12:55; author: ade; state: Exp; lines: +2 -2
Bleurgh. textproc/libxml.. Not devel/libxml.. No cookie.
Submitted by: knu
v. 1.10
date: 2000/06/08 21:44:47; author: ade; state: Exp; lines: +4 -2
Add missing dependencies
Submitted by: bento
v. 1.9
date: 2000/06/01 16:25:32; author: ade; state: Exp; lines: +2 -2
Updates for new shared library versions in GNOME 1.2
v. 1.8
date: 2000/05/17 16:35:01; author: ade; state: Exp; lines: +2 -2
Update to 0.1.52
v. 1.7
date: 2000/04/21 16:53:17; author: ade; state: Exp; lines: +2 -2
Update to 0.1.51
v. 1.6
date: 2000/04/21 07:51:57; author: mharo; state: Exp; lines: +2 -2
Correct whitespace introduced during PORTNAME conversion and portlint
v. 1.5
date: 2000/04/13 19:18:52; author: cpiazza; state: Exp; lines: +5 -4
Update to use PORTNAME/PORTVERSION
v. 1.4
date: 2000/04/06 15:34:31; author: ade; state: Exp; lines: +4 -4
Update to 0.1.50
v. 1.3
date: 2000/03/21 17:51:57; author: ade; state: Exp; lines: +7 -5
Update to 0.1.49
v. 1.2
date: 2000/01/22 04:41:53; author: ade; state: Exp; lines: +5 -5
Update to 0.1.48
Prompted by: Fennerisms in my inbox
v. 1.1
date: 1999/12/28 02:26:40; author: nakai; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1999/12/28 02:26:40; author: nakai; state: Exp; lines: +0 -0
New ports GNOME communication tool for palm pilot.
PR: ports/15727
Submitted by: Ade Lovett
=============================================================================
v. 1.76
date: 2007/10/24 23:36:25; author: marcus; state: Exp; lines: +1 -1
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
their work on porting modules and testing the whole ball of wax on
pointyhat (respectively).
The FreeBSD GNOME team would also like to thank our various testers and
contributors:
Yasuda Keisuke
Frank Jahnke
Pawel Worach
Brian Gruber
Franz Klammer
Yuri Pankov
Nick Barkas
Cristian KLEIN
Tony Maher
Scot Hetzel
Martin Matuska (mm)
Benoit Dejean
Martin Wilke (miwi)
(And anyone else I may have missed)
PRs fixed in this release:
111272, 113470, 115995, 116338
v. 1.75
date: 2007/07/23 09:36:23; author: rafan; state: Exp; lines: +1 -2
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
v. 1.74
date: 2007/05/19 20:20:23; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.73
date: 2006/11/23 05:56:32; author: marcus; state: Exp; lines: +3 -3
Update to 2.0.15.
v. 1.72
date: 2006/11/05 03:40:47; author: mezz; state: Exp; lines: +1 -1
INSTALLS_SHLIB -> USE_LDCONFIG.
Found by: portlint (cports.sh)
v. 1.71
date: 2006/09/25 03:03:06; author: mezz; state: Exp; lines: +2 -1
Chase pilot-link's shared library version bump. Bump the PORTREVISION. As for
the PRs, I shall chase and close a few of them.
Pointyhat: ijliao
v. 1.70
date: 2006/09/06 21:53:31; author: marcus; state: Exp; lines: +4 -6
Update to 2.0.14.
v. 1.69
date: 2006/05/28 13:17:38; author: pav; state: Exp; lines: +1 -1
- Rename ports
palm/gnomepilot2 -> palm/gnome-pilot
palm/gnomepilot-conduits2 -> palm/gnome-pilot-conduits
v. 1.68
date: 2006/05/15 22:23:00; author: mezz; state: Exp; lines: +1 -0
Add USE_GETTEXT to appease portlint.
v. 1.67
date: 2006/02/23 10:38:40; author: ade; state: Exp; lines: +2 -2
Conversion to a single libtool environment.
Approved by: portmgr (kris)
v. 1.66
date: 2005/11/15 06:50:45; author: ade; state: Exp; lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
v. 1.65
date: 2005/11/05 05:21:00; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION to chase the glib20 shared library update.
v. 1.64
date: 2005/04/27 04:00:26; author: bland; state: Exp; lines: +1 -1
Add USB devices support for 5.x.
Submitted by: Corey Smith
v. 1.63
date: 2005/04/22 03:54:45; author: marcus; state: Exp; lines: +1 -1
Commit a patch forgotten in the last commit:
Link the gnome-pilot libraries correctly so they play nice with the new
pkg-config.
Reminded by: bland
v. 1.62
date: 2005/04/22 01:06:47; author: marcus; state: Exp; lines: +1 -0
Link the gnome-pilot libraries correctly so they play nice with the new
pkg-config.
Reported by: Sven Esbjerg
v. 1.61
date: 2005/04/10 18:25:50; author: marcus; state: Exp; lines: +1 -2
Update to 2.0.13.
v. 1.60
date: 2005/03/12 10:53:07; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION to chase the glib20 shared lib version change.
v. 1.59
date: 2004/11/23 19:33:07; author: mezz; state: Exp; lines: +1 -0
Use new GCONF_SCHEMAS.
Approved by: pav
v. 1.58
date: 2004/11/23 02:23:04; author: mezz; state: Exp; lines: +1 -0
Use new INSTALLS_OMF.
Approved by: bland, kwm, marcus and pav
v. 1.57
date: 2004/11/07 22:37:07; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.
v. 1.56
date: 2004/09/03 18:51:03; author: marcus; state: Exp; lines: +1 -1
Update to 2.0.12.
v. 1.55
date: 2004/08/28 12:36:43; author: adamw; state: Exp; lines: +1 -1
Use intlhack.
v. 1.54
date: 2004/08/27 05:09:42; author: marcus; state: Exp; lines: +2 -3
Update to 2.0.11.
v. 1.53
date: 2004/07/28 14:36:30; author: adamw; state: Exp; lines: +1 -1
Move a bunch of now unique stuff out of gnomehier and into
the ports that really own the directories.
v. 1.52
date: 2004/07/09 17:42:44; author: marcus; state: Exp; lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
v. 1.51
date: 2004/04/05 03:30:57; author: marcus; state: Exp; lines: +1 -1
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
v. 1.50
date: 2004/03/14 06:17:12; author: ade; state: Exp; lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
v. 1.49
date: 2004/02/04 05:08:30; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.48
date: 2003/11/17 12:29:03; author: trevor; state: Exp; lines: +0 -1
USE_REINPLACE need be defined only when REINPLACE_CMD is used.
v. 1.47
date: 2003/07/17 03:23:05; author: adamw; state: Exp; lines: +1 -1
Update to 2.0.10.
v. 1.46
date: 2003/06/12 09:46:03; author: adamw; state: Exp; lines: +0 -4
Remove REINPLACE commands that were rolled into gnomehack.
v. 1.45
date: 2003/05/19 23:42:34; author: marcus; state: Exp; lines: +3 -2
Update to 2.0.9.
v. 1.44
date: 2003/05/07 00:44:47; author: marcus; state: Exp; lines: +1 -1
Update to 2.0.8.
v. 1.43
date: 2003/05/03 22:05:54; author: marcus; state: Exp; lines: +1 -1
Update to 2.0.7.
v. 1.42
date: 2003/04/30 05:19:59; author: marcus; state: Exp; lines: +2 -2
Update to 2.0.6.
v. 1.41
date: 2003/04/20 19:39:10; author: marcus; state: Exp; lines: +0 -1
Remove USE_GNOMENG.
v. 1.40
date: 2003/04/15 01:14:59; author: marcus; state: Exp; lines: +3 -4
* Update to 2.0.5
* Convert to new GNOME infrastructure
v. 1.39
date: 2003/03/30 23:33:05; author: marcus; state: Exp; lines: +2 -1
Add missing pisock dependency.
v. 1.38
date: 2003/03/30 23:13:33; author: marcus; state: Exp; lines: +11 -14
Add gnomepilot2 after a repo copy from gnomepilot. gnomepilot2 is the
PalmOS conduit system for GNOME 2.
v. 1.37
date: 2003/03/07 06:08:05; author: ade; state: Exp; lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.36
date: 2003/01/01 19:10:33; author: marcus; state: Exp; lines: +1 -2
Update to 0.1.71.
v. 1.35
date: 2002/12/13 16:13:30; author: marcus; state: Exp; lines: +2 -0
Adda RUN_DEPENDS on gnomecontrolcenter. This will allow GNOME 2 users to
fully configure the Palm settings and conduits.
Approved by: portmgr (knu)
v. 1.34
date: 2002/11/09 06:11:45; author: marcus; state: Exp; lines: +1 -1
Update to 0.1.69.
v. 1.33
date: 2002/10/25 02:22:03; author: marcus; state: Exp; lines: +1 -2
Update to 0.1.67.
v. 1.32
date: 2002/09/20 17:07:12; author: marcus; state: Exp; lines: +1 -1
GNOME has just changed the layout of their FTP site. This resulted in
making all the distfiles unfetachable. Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.
v. 1.31
date: 2002/09/17 16:35:38; author: marcus; state: Exp; lines: +2 -1
Chase the pisock shared lib version number. Note, this new version may
break some of these ports, but they're definitely broken without this.
v. 1.30
date: 2002/07/11 17:16:01; author: sobomax; state: Exp; lines: +5 -6
Convert all core GNOME1 components and some of the most popular GNOME1
apps to bsd.gnomeng.mk. The goal is to make GNOME1 framework more modular,
which will allow to use GNOME1 apps with GNOME2 desktop as well as considerably
reduce langht of dependency chains for GNOME1 ports (for example after this
commit AbiWord's dependency chain was reduced by 7 ports from 57 to only
50, while Gnumeric's - from 60 to 53 and so on).
The most of the GNOME1 apps are still not converted, so that lot of work is
still ahead.
Please report any unusual problems to gnome@FreeBSD.org.
Discussed with: marcus
Reviewed by: marcus
v. 1.29
date: 2002/04/25 17:15:06; author: sobomax; state: Exp; lines: +7 -3
Update to 0.1.65.
v. 1.28
date: 2002/01/07 00:36:42; author: sobomax; state: Exp; lines: +2 -3
Now pisock shared library is in the ${LOCALBASE}/lib, move pilot-link from
{BUILD,RUN}_DEPENDS into LIB_DEPENDS (partially revert 1.26).
v. 1.27
date: 2002/01/05 08:57:29; author: will; state: Exp; lines: +3 -3
Make pilot-link install directly into PREFIX. This should allow
pilot-link and all dependents to build correctly on bento.
v. 1.26
date: 2001/12/19 10:17:28; author: sobomax; state: Exp; lines: +3 -2
Move pilot-link from LIB_DEPENDS to {BUILD,RUN}_DEPENDS, because when building
on bento ${LOCALBASE}/pilot/lib not in the ldconfig(8) search path.
Submitted by: bento
v. 1.25
date: 2001/12/06 09:18:50; author: sobomax; state: Exp; lines: +1 -1
Update to 0.1.64.
PR: 32503
Submitted by: Hendrik Scholz
v. 1.24
date: 2001/12/03 09:46:28; author: sobomax; state: Exp; lines: +3 -3
Update to 0.1.63.
PR: 32428
Submitted by: Chia-liang Kao
v. 1.23
date: 2001/08/31 12:36:00; author: sobomax; state: Exp; lines: +2 -2
pisock.3 --> pisock.4 in LIB_DEPENDS.
Submitted by: bento
v. 1.22
date: 2001/05/11 16:36:31; author: ade; state: Exp; lines: +2 -2
SWitch maintainership of core GNOME ports to a small group of
committers (gnome@FreeBSD.org), since this is now definitely too big
for just one person.
v. 1.21
date: 2001/05/04 21:41:21; author: ade; state: Exp; lines: +3 -4
Various patches (mainly shared library v. changes) for those
ports that depend on GNOME and need to change for 1.4
v. 1.20
date: 2001/03/29 16:34:32; author: sobomax; state: Exp; lines: +2 -2
-pthread --> ${PTHREAD_LIBS}
-D_THREAD_SAFE --> ${PTHREAD_CFLAGS}
Note: my first intention was to test this out on bento/beta, but per ade's
requiest I opted to do it quickly.
v. 1.19
date: 2000/10/05 07:17:15; author: reg; state: Exp; lines: +5 -12
Implement USE_GNOME, part 2.
v. 1.18
date: 2000/08/04 16:11:24; author: ade; state: Exp; lines: +2 -2
Re-sobomize to use pre-patch instead of post-extract
Wrists slapped by: knu, sheldon
v. 1.17
date: 2000/08/04 01:34:28; author: ade; state: Exp; lines: +8 -1
Extensive patchfile cleanups using sobomax's wonderful
post-extract rule
v. 1.16
date: 2000/07/11 23:14:33; author: ade; state: Exp; lines: +3 -2
gnomepilot (and the conduits) have been available across
the GNOME mirrors for a while now. Fix MASTER_SITES accordingly.
v. 1.15
date: 2000/07/11 22:02:20; author: ade; state: Exp; lines: +2 -2
Update for new devel/libglade shlib version
v. 1.14
date: 2000/06/16 21:52:39; author: asami; state: Exp; lines: +2 -2
Rename INSTALLS_SHLIBS to INSTALLS_SHLIB. (There was a typo in the
previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
Line up the rhs of variable assignments nicely. Remove a couple of extra
whitespaces while I'm here.
Suggested by: sobomax
v. 1.13
date: 2000/06/16 10:38:02; author: sobomax; state: Exp; lines: +2 -1
Final round of the INSTALLS_SHLIBS=yes conversion. Few remaining ports with
ldconfig in PLIST need personal consideration.
v. 1.12
date: 2000/06/15 22:36:32; author: ade; state: Exp; lines: +3 -2
Add devel/libglade dependency
Problem pointed out by: Roman Shterenzon
v. 1.11
date: 2000/06/10 16:12:55; author: ade; state: Exp; lines: +2 -2
Bleurgh. textproc/libxml.. Not devel/libxml.. No cookie.
Submitted by: knu
v. 1.10
date: 2000/06/08 21:44:47; author: ade; state: Exp; lines: +4 -2
Add missing dependencies
Submitted by: bento
v. 1.9
date: 2000/06/01 16:25:32; author: ade; state: Exp; lines: +2 -2
Updates for new shared library versions in GNOME 1.2
v. 1.8
date: 2000/05/17 16:35:01; author: ade; state: Exp; lines: +2 -2
Update to 0.1.52
v. 1.7
date: 2000/04/21 16:53:17; author: ade; state: Exp; lines: +2 -2
Update to 0.1.51
v. 1.6
date: 2000/04/21 07:51:57; author: mharo; state: Exp; lines: +2 -2
Correct whitespace introduced during PORTNAME conversion and portlint
v. 1.5
date: 2000/04/13 19:18:52; author: cpiazza; state: Exp; lines: +5 -4
Update to use PORTNAME/PORTVERSION
v. 1.4
date: 2000/04/06 15:34:31; author: ade; state: Exp; lines: +4 -4
Update to 0.1.50
v. 1.3
date: 2000/03/21 17:51:57; author: ade; state: Exp; lines: +7 -5
Update to 0.1.49
v. 1.2
date: 2000/01/22 04:41:53; author: ade; state: Exp; lines: +5 -5
Update to 0.1.48
Prompted by: Fennerisms in my inbox
v. 1.1
date: 1999/12/28 02:26:40; author: nakai; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1999/12/28 02:26:40; author: nakai; state: Exp; lines: +0 -0
New ports GNOME communication tool for palm pilot.
PR: ports/15727
Submitted by: Ade Lovett
=============================================================================
v. 1.76
date: 2007/10/24 23:36:25; author: marcus; state: Exp; lines: +1 -1
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
their work on porting modules and testing the whole ball of wax on
pointyhat (respectively).
The FreeBSD GNOME team would also like to thank our various testers and
contributors:
Yasuda Keisuke
Frank Jahnke
Pawel Worach
Brian Gruber
Franz Klammer
Yuri Pankov
Nick Barkas
Cristian KLEIN
Tony Maher
Scot Hetzel
Martin Matuska (mm)
Benoit Dejean
Martin Wilke (miwi)
(And anyone else I may have missed)
PRs fixed in this release:
111272, 113470, 115995, 116338
v. 1.75
date: 2007/07/23 09:36:23; author: rafan; state: Exp; lines: +1 -2
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
v. 1.74
date: 2007/05/19 20:20:23; author: flz; state: Exp; lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.73
date: 2006/11/23 05:56:32; author: marcus; state: Exp; lines: +3 -3
Update to 2.0.15.
v. 1.72
date: 2006/11/05 03:40:47; author: mezz; state: Exp; lines: +1 -1
INSTALLS_SHLIB -> USE_LDCONFIG.
Found by: portlint (cports.sh)
v. 1.71
date: 2006/09/25 03:03:06; author: mezz; state: Exp; lines: +2 -1
Chase pilot-link's shared library version bump. Bump the PORTREVISION. As for
the PRs, I shall chase and close a few of them.
Pointyhat: ijliao
v. 1.70
date: 2006/09/06 21:53:31; author: marcus; state: Exp; lines: +4 -6
Update to 2.0.14.
v. 1.69
date: 2006/05/28 13:17:38; author: pav; state: Exp; lines: +1 -1
- Rename ports
palm/gnomepilot2 -> palm/gnome-pilot
palm/gnomepilot-conduits2 -> palm/gnome-pilot-conduits
v. 1.68
date: 2006/05/15 22:23:00; author: mezz; state: Exp; lines: +1 -0
Add USE_GETTEXT to appease portlint.
v. 1.67
date: 2006/02/23 10:38:40; author: ade; state: Exp; lines: +2 -2
Conversion to a single libtool environment.
Approved by: portmgr (kris)
v. 1.66
date: 2005/11/15 06:50:45; author: ade; state: Exp; lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
v. 1.65
date: 2005/11/05 05:21:00; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION to chase the glib20 shared library update.
v. 1.64
date: 2005/04/27 04:00:26; author: bland; state: Exp; lines: +1 -1
Add USB devices support for 5.x.
Submitted by: Corey Smith
v. 1.63
date: 2005/04/22 03:54:45; author: marcus; state: Exp; lines: +1 -1
Commit a patch forgotten in the last commit:
Link the gnome-pilot libraries correctly so they play nice with the new
pkg-config.
Reminded by: bland
v. 1.62
date: 2005/04/22 01:06:47; author: marcus; state: Exp; lines: +1 -0
Link the gnome-pilot libraries correctly so they play nice with the new
pkg-config.
Reported by: Sven Esbjerg
v. 1.61
date: 2005/04/10 18:25:50; author: marcus; state: Exp; lines: +1 -2
Update to 2.0.13.
v. 1.60
date: 2005/03/12 10:53:07; author: marcus; state: Exp; lines: +1 -1
Bump PORTREVISION to chase the glib20 shared lib version change.
v. 1.59
date: 2004/11/23 19:33:07; author: mezz; state: Exp; lines: +1 -0
Use new GCONF_SCHEMAS.
Approved by: pav
v. 1.58
date: 2004/11/23 02:23:04; author: mezz; state: Exp; lines: +1 -0
Use new INSTALLS_OMF.
Approved by: bland, kwm, marcus and pav
v. 1.57
date: 2004/11/07 22:37:07; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.
v. 1.56
date: 2004/09/03 18:51:03; author: marcus; state: Exp; lines: +1 -1
Update to 2.0.12.
v. 1.55
date: 2004/08/28 12:36:43; author: adamw; state: Exp; lines: +1 -1
Use intlhack.
v. 1.54
date: 2004/08/27 05:09:42; author: marcus; state: Exp; lines: +2 -3
Update to 2.0.11.
v. 1.53
date: 2004/07/28 14:36:30; author: adamw; state: Exp; lines: +1 -1
Move a bunch of now unique stuff out of gnomehier and into
the ports that really own the directories.
v. 1.52
date: 2004/07/09 17:42:44; author: marcus; state: Exp; lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
v. 1.51
date: 2004/04/05 03:30:57; author: marcus; state: Exp; lines: +1 -1
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
v. 1.50
date: 2004/03/14 06:17:12; author: ade; state: Exp; lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
v. 1.49
date: 2004/02/04 05:08:30; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
v. 1.48
date: 2003/11/17 12:29:03; author: trevor; state: Exp; lines: +0 -1
USE_REINPLACE need be defined only when REINPLACE_CMD is used.
v. 1.47
date: 2003/07/17 03:23:05; author: adamw; state: Exp; lines: +1 -1
Update to 2.0.10.
v. 1.46
date: 2003/06/12 09:46:03; author: adamw; state: Exp; lines: +0 -4
Remove REINPLACE commands that were rolled into gnomehack.
v. 1.45
date: 2003/05/19 23:42:34; author: marcus; state: Exp; lines: +3 -2
Update to 2.0.9.
v. 1.44
date: 2003/05/07 00:44:47; author: marcus; state: Exp; lines: +1 -1
Update to 2.0.8.
v. 1.43
date: 2003/05/03 22:05:54; author: marcus; state: Exp; lines: +1 -1
Update to 2.0.7.
v. 1.42
date: 2003/04/30 05:19:59; author: marcus; state: Exp; lines: +2 -2
Update to 2.0.6.
v. 1.41
date: 2003/04/20 19:39:10; author: marcus; state: Exp; lines: +0 -1
Remove USE_GNOMENG.
v. 1.40
date: 2003/04/15 01:14:59; author: marcus; state: Exp; lines: +3 -4
* Update to 2.0.5
* Convert to new GNOME infrastructure
v. 1.39
date: 2003/03/30 23:33:05; author: marcus; state: Exp; lines: +2 -1
Add missing pisock dependency.
v. 1.38
date: 2003/03/30 23:13:33; author: marcus; state: Exp; lines: +11 -14
Add gnomepilot2 after a repo copy from gnomepilot. gnomepilot2 is the
PalmOS conduit system for GNOME 2.
v. 1.37
date: 2003/03/07 06:08:05; author: ade; state: Exp; lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
v. 1.36
date: 2003/01/01 19:10:33; author: marcus; state: Exp; lines: +1 -2
Update to 0.1.71.
v. 1.35
date: 2002/12/13 16:13:30; author: marcus; state: Exp; lines: +2 -0
Adda RUN_DEPENDS on gnomecontrolcenter. This will allow GNOME 2 users to
fully configure the Palm settings and conduits.
Approved by: portmgr (knu)
v. 1.34
date: 2002/11/09 06:11:45; author: marcus; state: Exp; lines: +1 -1
Update to 0.1.69.
v. 1.33
date: 2002/10/25 02:22:03; author: marcus; state: Exp; lines: +1 -2
Update to 0.1.67.
v. 1.32
date: 2002/09/20 17:07:12; author: marcus; state: Exp; lines: +1 -1
GNOME has just changed the layout of their FTP site. This resulted in
making all the distfiles unfetachable. Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.
v. 1.31
date: 2002/09/17 16:35:38; author: marcus; state: Exp; lines: +2 -1
Chase the pisock shared lib version number. Note, this new version may
break some of these ports, but they're definitely broken without this.
v. 1.30
date: 2002/07/11 17:16:01; author: sobomax; state: Exp; lines: +5 -6
Convert all core GNOME1 components and some of the most popular GNOME1
apps to bsd.gnomeng.mk. The goal is to make GNOME1 framework more modular,
which will allow to use GNOME1 apps with GNOME2 desktop as well as considerably
reduce langht of dependency chains for GNOME1 ports (for example after this
commit AbiWord's dependency chain was reduced by 7 ports from 57 to only
50, while Gnumeric's - from 60 to 53 and so on).
The most of the GNOME1 apps are still not converted, so that lot of work is
still ahead.
Please report any unusual problems to gnome@FreeBSD.org.
Discussed with: marcus
Reviewed by: marcus
v. 1.29
date: 2002/04/25 17:15:06; author: sobomax; state: Exp; lines: +7 -3
Update to 0.1.65.
v. 1.28
date: 2002/01/07 00:36:42; author: sobomax; state: Exp; lines: +2 -3
Now pisock shared library is in the ${LOCALBASE}/lib, move pilot-link from
{BUILD,RUN}_DEPENDS into LIB_DEPENDS (partially revert 1.26).
v. 1.27
date: 2002/01/05 08:57:29; author: will; state: Exp; lines: +3 -3
Make pilot-link install directly into PREFIX. This should allow
pilot-link and all dependents to build correctly on bento.
v. 1.26
date: 2001/12/19 10:17:28; author: sobomax; state: Exp; lines: +3 -2
Move pilot-link from LIB_DEPENDS to {BUILD,RUN}_DEPENDS, because when building
on bento ${LOCALBASE}/pilot/lib not in the ldconfig(8) search path.
Submitted by: bento
v. 1.25
date: 2001/12/06 09:18:50; author: sobomax; state: Exp; lines: +1 -1
Update to 0.1.64.
PR: 32503
Submitted by: Hendrik Scholz
v. 1.24
date: 2001/12/03 09:46:28; author: sobomax; state: Exp; lines: +3 -3
Update to 0.1.63.
PR: 32428
Submitted by: Chia-liang Kao
v. 1.23
date: 2001/08/31 12:36:00; author: sobomax; state: Exp; lines: +2 -2
pisock.3 --> pisock.4 in LIB_DEPENDS.
Submitted by: bento
v. 1.22
date: 2001/05/11 16:36:31; author: ade; state: Exp; lines: +2 -2
SWitch maintainership of core GNOME ports to a small group of
committers (gnome@FreeBSD.org), since this is now definitely too big
for just one person.
v. 1.21
date: 2001/05/04 21:41:21; author: ade; state: Exp; lines: +3 -4
Various patches (mainly shared library v. changes) for those
ports that depend on GNOME and need to change for 1.4
v. 1.20
date: 2001/03/29 16:34:32; author: sobomax; state: Exp; lines: +2 -2
-pthread --> ${PTHREAD_LIBS}
-D_THREAD_SAFE --> ${PTHREAD_CFLAGS}
Note: my first intention was to test this out on bento/beta, but per ade's
requiest I opted to do it quickly.
v. 1.19
date: 2000/10/05 07:17:15; author: reg; state: Exp; lines: +5 -12
Implement USE_GNOME, part 2.
v. 1.18
date: 2000/08/04 16:11:24; author: ade; state: Exp; lines: +2 -2
Re-sobomize to use pre-patch instead of post-extract
Wrists slapped by: knu, sheldon
v. 1.17
date: 2000/08/04 01:34:28; author: ade; state: Exp; lines: +8 -1
Extensive patchfile cleanups using sobomax's wonderful
post-extract rule
v. 1.16
date: 2000/07/11 23:14:33; author: ade; state: Exp; lines: +3 -2
gnomepilot (and the conduits) have been available across
the GNOME mirrors for a while now. Fix MASTER_SITES accordingly.
v. 1.15
date: 2000/07/11 22:02:20; author: ade; state: Exp; lines: +2 -2
Update for new devel/libglade shlib version
v. 1.14
date: 2000/06/16 21:52:39; author: asami; state: Exp; lines: +2 -2
Rename INSTALLS_SHLIBS to INSTALLS_SHLIB. (There was a typo in the
previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
Line up the rhs of variable assignments nicely. Remove a couple of extra
whitespaces while I'm here.
Suggested by: sobomax
v. 1.13
date: 2000/06/16 10:38:02; author: sobomax; state: Exp; lines: +2 -1
Final round of the INSTALLS_SHLIBS=yes conversion. Few remaining ports with
ldconfig in PLIST need personal consideration.
v. 1.12
date: 2000/06/15 22:36:32; author: ade; state: Exp; lines: +3 -2
Add devel/libglade dependency
Problem pointed out by: Roman Shterenzon
v. 1.11
date: 2000/06/10 16:12:55; author: ade; state: Exp; lines: +2 -2
Bleurgh. textproc/libxml.. Not devel/libxml.. No cookie.
Submitted by: knu
v. 1.10
date: 2000/06/08 21:44:47; author: ade; state: Exp; lines: +4 -2
Add missing dependencies
Submitted by: bento
v. 1.9
date: 2000/06/01 16:25:32; author: ade; state: Exp; lines: +2 -2
Updates for new shared library versions in GNOME 1.2
v. 1.8
date: 2000/05/17 16:35:01; author: ade; state: Exp; lines: +2 -2
Update to 0.1.52
v. 1.7
date: 2000/04/21 16:53:17; author: ade; state: Exp; lines: +2 -2
Update to 0.1.51
v. 1.6
date: 2000/04/21 07:51:57; author: mharo; state: Exp; lines: +2 -2
Correct whitespace introduced during PORTNAME conversion and portlint
v. 1.5
date: 2000/04/13 19:18:52; author: cpiazza; state: Exp; lines: +5 -4
Update to use PORTNAME/PORTVERSION
v. 1.4
date: 2000/04/06 15:34:31; author: ade; state: Exp; lines: +4 -4
Update to 0.1.50
v. 1.3
date: 2000/03/21 17:51:57; author: ade; state: Exp; lines: +7 -5
Update to 0.1.49
v. 1.2
date: 2000/01/22 04:41:53; author: ade; state: Exp; lines: +5 -5
Update to 0.1.48
Prompted by: Fennerisms in my inbox
v. 1.1
date: 1999/12/28 02:26:40; author: nakai; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1999/12/28 02:26:40; author: nakai; state: Exp; lines: +0 -0
New ports GNOME communication tool for palm pilot.
PR: ports/15727
Submitted by: Ade Lovett
=============================================================================
|
| |
|