The FreeBSD Ports Archive
FreeBSD net-p2p  : linux-edonkey-tool-recovermet
Tool that tries to re-create x.part.met files compromised due to crash
This is a tool for eDonkey2000 that re-creates x.part.met files
that have been lost or set zero size after a crash.
Obviously, this only works if the x.part file in your temp folder
survives. Only those 9MB blocks will be saved which have been fully
downloaded, but you'll be able to continue your download.
The tool tries to find the best match from information stored in
the known.met file and all the x.part.met files in the temp folder.
Therefore, you can increase the chance of recovery by searching for
the file you are trying to restore and put as many possible candidates
as you can find in the download list (which you can cancel again
after using this tool).
N.B. Obviously these candidates should have the same size as your
download was/is supposed to have! Therefore, if your download was
supposed to be 699MB when finished, files with 720MB or 750MB are
NOT likely candidates, even if the name is the same.
|
linux-edonkey-tool-recovermet history
v. 1.17
date: 2006/01/30 21:36:20; author: pav; state: Exp; lines: +1 -1
Populate newly create net-p2p category with these ports:
ftp/jigdo
net/amule1
net/amule2
net/apollon
net/azureus
net/bnbt
net/btpeer
net/btqueue
net/cdonkey
net/ctorrent
net/dcd
net/dclib
net/dctc
net/dctc-gui
net/dctc-gui-qt
net/edonkey-gui-gtk
net/edonkey-gui-gtk-urlslave
net/fcptools
net/fidelio
net/freenet
net/frost
net/giftcurs
net/giftoxic
net/giftui
net/gift
net/gift-fasttrack
net/gift-gnutella
net/gift-openft
net/gkrellm-gift
net/gnewtellium
net/gnome-btdownload
net/gnunet
net/gtkhx
net/gtk-gnutella
net/gtorrentviewer
net/hagelslag
net/hx
net/i2p
net/javadc
net/kmldonkey
net/ktorrent
net/libbt
net/liberator
net/libfreenet
net/libpdtp
net/libtorrent
net/limewire
net/linux-agsatellite
net/linux-edonkey-core
net/linux-edonkey-server
net/linux-jigdo
net/linux-overnet-core
net/minder
net/mldonkey
net/mldonkey-core
net/mldonkey-core-devel
net/mldonkey-devel
net/mldonkey-gui
net/mldonkey-gui-devel
net/mldonkey-perlreactor
net/mldonkey-sancho
net/mldonkey-serverspy
net/mldonkey-urlslave
net/mutella
net/mute-net
net/mute-net-gui
net/mute-net-text
net/napshare
net/nicotine
net/opendchub
net/peercast
net/phex
net/pyslsk
net/py-bittornado
net/py-bittornado-core
net/py-bittorrent
net/py-bittorrent-core
net/py-bittorrent-core-devel
net/py-bittorrent-devel
net/py-fngrab
net/py-kenosis
net/py-kenosis-bittorrent
net/py-py2play
net/p5-pdonkey
net/qtella
net/qtorrent
net/rtorrent
net/squall
net/torrentflux
net/torrentsniff
net/trackerbt
net/transmission
net/valknut
net/verlihub
net/verlihub-plugins
net/xmule
net/xnap
misc/ed2k
misc/edonkey-tool-hash
misc/linux-edonkey-tool-recovermet
Repocopies by: marcus
v. 1.16
date: 2005/12/12 19:29:59; author: lioux; state: Exp; lines: +7 -13
o Add working MASTER_SITES; thus, fixing BROKEN/DEPRECATED/EXPIRATION_DATE
o distfile has changed but the installed binary has the same md5
checksum as the one from the previous distfile
v. 1.15
date: 2005/10/11 19:17:34; author: linimon; state: Exp; lines: +5 -1
Mark as BROKEN: unfetchable.
Source: distfile survey
v. 1.14
date: 2005/06/17 22:59:20; author: netchild; state: Exp; lines: +1 -10
Mega-patch to cleanup the ports infrastructure regarding our linux bits:
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn
v. 1.13
date: 2005/05/28 14:33:25; author: pav; state: Exp; lines: +3 -0
- Add pkg-message with a note about limitation of this software with big files
PR: ports/74177, ports/81581
Submitted by: No Name
v. 1.12
date: 2005/03/13 01:18:38; author: lioux; state: Exp; lines: +1 -1
Drop maintainership
v. 1.11
date: 2005/03/01 21:51:41; author: trevor; state: Exp; lines: +1 -1
Respect the user's USE_LINUX setting.
v. 1.10
date: 2004/12/31 18:24:01; author: netchild; state: Exp; lines: +1 -0
Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX= specifies a dependency upon
emulators/linux_base-, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base- (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portv. of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
v. 1.9
date: 2004/12/25 11:43:51; author: lioux; state: Exp; lines: +0 -1
Remove deprecated USE_SIZE
v. 1.8
date: 2004/02/08 01:13:52; author: lioux; state: Exp; lines: +1 -0
USE_SIZEify
v. 1.7
date: 2004/02/06 13:11:50; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES (bento-tested, marcus-reviewed).
v. 1.6
date: 2003/06/02 15:13:33; author: lioux; state: Exp; lines: +0 -0
Forced commit to document repo copy for better name convention
edonkey-tool-recovermet -> linux-edonkey-tool-recovermet
Repo copy approved by: portmgr (self)
Repo copy done by: cvs (joe)
v. 1.5
date: 2003/04/29 01:57:13; author: lioux; state: Exp; lines: +1 -0
Add "PKGNAMEPREFIX=linux-" to linux binary ports
v. 1.4
date: 2003/02/23 19:58:23; author: lioux; state: Exp; lines: +1 -0
De-pkg-comment
v. 1.3
date: 2002/05/28 16:33:26; author: lioux; state: Exp; lines: +6 -4
After update of linux_base to 7.1 in rev 1.60, correct detection
of strip tool since it is not part of 7.1
v. 1.2
date: 2002/02/22 17:32:02; author: lioux; state: Exp; lines: +1 -1
Add linux as secondary category since this is a linux binary
v. 1.1
date: 2002/02/21 01:41:17; author: lioux; state: Exp;
New port edonkey-tool-recovermet version 0.0.2: Tool that tries to
re-create x.part.met files compromised due to crash
=============================================================================
v. 1.17
date: 2006/01/30 21:36:20; author: pav; state: Exp; lines: +1 -1
Populate newly create net-p2p category with these ports:
ftp/jigdo
net/amule1
net/amule2
net/apollon
net/azureus
net/bnbt
net/btpeer
net/btqueue
net/cdonkey
net/ctorrent
net/dcd
net/dclib
net/dctc
net/dctc-gui
net/dctc-gui-qt
net/edonkey-gui-gtk
net/edonkey-gui-gtk-urlslave
net/fcptools
net/fidelio
net/freenet
net/frost
net/giftcurs
net/giftoxic
net/giftui
net/gift
net/gift-fasttrack
net/gift-gnutella
net/gift-openft
net/gkrellm-gift
net/gnewtellium
net/gnome-btdownload
net/gnunet
net/gtkhx
net/gtk-gnutella
net/gtorrentviewer
net/hagelslag
net/hx
net/i2p
net/javadc
net/kmldonkey
net/ktorrent
net/libbt
net/liberator
net/libfreenet
net/libpdtp
net/libtorrent
net/limewire
net/linux-agsatellite
net/linux-edonkey-core
net/linux-edonkey-server
net/linux-jigdo
net/linux-overnet-core
net/minder
net/mldonkey
net/mldonkey-core
net/mldonkey-core-devel
net/mldonkey-devel
net/mldonkey-gui
net/mldonkey-gui-devel
net/mldonkey-perlreactor
net/mldonkey-sancho
net/mldonkey-serverspy
net/mldonkey-urlslave
net/mutella
net/mute-net
net/mute-net-gui
net/mute-net-text
net/napshare
net/nicotine
net/opendchub
net/peercast
net/phex
net/pyslsk
net/py-bittornado
net/py-bittornado-core
net/py-bittorrent
net/py-bittorrent-core
net/py-bittorrent-core-devel
net/py-bittorrent-devel
net/py-fngrab
net/py-kenosis
net/py-kenosis-bittorrent
net/py-py2play
net/p5-pdonkey
net/qtella
net/qtorrent
net/rtorrent
net/squall
net/torrentflux
net/torrentsniff
net/trackerbt
net/transmission
net/valknut
net/verlihub
net/verlihub-plugins
net/xmule
net/xnap
misc/ed2k
misc/edonkey-tool-hash
misc/linux-edonkey-tool-recovermet
Repocopies by: marcus
v. 1.16
date: 2005/12/12 19:29:59; author: lioux; state: Exp; lines: +7 -13
o Add working MASTER_SITES; thus, fixing BROKEN/DEPRECATED/EXPIRATION_DATE
o distfile has changed but the installed binary has the same md5
checksum as the one from the previous distfile
v. 1.15
date: 2005/10/11 19:17:34; author: linimon; state: Exp; lines: +5 -1
Mark as BROKEN: unfetchable.
Source: distfile survey
v. 1.14
date: 2005/06/17 22:59:20; author: netchild; state: Exp; lines: +1 -10
Mega-patch to cleanup the ports infrastructure regarding our linux bits:
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn
v. 1.13
date: 2005/05/28 14:33:25; author: pav; state: Exp; lines: +3 -0
- Add pkg-message with a note about limitation of this software with big files
PR: ports/74177, ports/81581
Submitted by: No Name
v. 1.12
date: 2005/03/13 01:18:38; author: lioux; state: Exp; lines: +1 -1
Drop maintainership
v. 1.11
date: 2005/03/01 21:51:41; author: trevor; state: Exp; lines: +1 -1
Respect the user's USE_LINUX setting.
v. 1.10
date: 2004/12/31 18:24:01; author: netchild; state: Exp; lines: +1 -0
Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX= specifies a dependency upon
emulators/linux_base-, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base- (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portv. of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
v. 1.9
date: 2004/12/25 11:43:51; author: lioux; state: Exp; lines: +0 -1
Remove deprecated USE_SIZE
v. 1.8
date: 2004/02/08 01:13:52; author: lioux; state: Exp; lines: +1 -0
USE_SIZEify
v. 1.7
date: 2004/02/06 13:11:50; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES (bento-tested, marcus-reviewed).
v. 1.6
date: 2003/06/02 15:13:33; author: lioux; state: Exp; lines: +0 -0
Forced commit to document repo copy for better name convention
edonkey-tool-recovermet -> linux-edonkey-tool-recovermet
Repo copy approved by: portmgr (self)
Repo copy done by: cvs (joe)
v. 1.5
date: 2003/04/29 01:57:13; author: lioux; state: Exp; lines: +1 -0
Add "PKGNAMEPREFIX=linux-" to linux binary ports
v. 1.4
date: 2003/02/23 19:58:23; author: lioux; state: Exp; lines: +1 -0
De-pkg-comment
v. 1.3
date: 2002/05/28 16:33:26; author: lioux; state: Exp; lines: +6 -4
After update of linux_base to 7.1 in rev 1.60, correct detection
of strip tool since it is not part of 7.1
v. 1.2
date: 2002/02/22 17:32:02; author: lioux; state: Exp; lines: +1 -1
Add linux as secondary category since this is a linux binary
v. 1.1
date: 2002/02/21 01:41:17; author: lioux; state: Exp;
New port edonkey-tool-recovermet version 0.0.2: Tool that tries to
re-create x.part.met files compromised due to crash
=============================================================================
v. 1.17
date: 2006/01/30 21:36:20; author: pav; state: Exp; lines: +1 -1
Populate newly create net-p2p category with these ports:
ftp/jigdo
net/amule1
net/amule2
net/apollon
net/azureus
net/bnbt
net/btpeer
net/btqueue
net/cdonkey
net/ctorrent
net/dcd
net/dclib
net/dctc
net/dctc-gui
net/dctc-gui-qt
net/edonkey-gui-gtk
net/edonkey-gui-gtk-urlslave
net/fcptools
net/fidelio
net/freenet
net/frost
net/giftcurs
net/giftoxic
net/giftui
net/gift
net/gift-fasttrack
net/gift-gnutella
net/gift-openft
net/gkrellm-gift
net/gnewtellium
net/gnome-btdownload
net/gnunet
net/gtkhx
net/gtk-gnutella
net/gtorrentviewer
net/hagelslag
net/hx
net/i2p
net/javadc
net/kmldonkey
net/ktorrent
net/libbt
net/liberator
net/libfreenet
net/libpdtp
net/libtorrent
net/limewire
net/linux-agsatellite
net/linux-edonkey-core
net/linux-edonkey-server
net/linux-jigdo
net/linux-overnet-core
net/minder
net/mldonkey
net/mldonkey-core
net/mldonkey-core-devel
net/mldonkey-devel
net/mldonkey-gui
net/mldonkey-gui-devel
net/mldonkey-perlreactor
net/mldonkey-sancho
net/mldonkey-serverspy
net/mldonkey-urlslave
net/mutella
net/mute-net
net/mute-net-gui
net/mute-net-text
net/napshare
net/nicotine
net/opendchub
net/peercast
net/phex
net/pyslsk
net/py-bittornado
net/py-bittornado-core
net/py-bittorrent
net/py-bittorrent-core
net/py-bittorrent-core-devel
net/py-bittorrent-devel
net/py-fngrab
net/py-kenosis
net/py-kenosis-bittorrent
net/py-py2play
net/p5-pdonkey
net/qtella
net/qtorrent
net/rtorrent
net/squall
net/torrentflux
net/torrentsniff
net/trackerbt
net/transmission
net/valknut
net/verlihub
net/verlihub-plugins
net/xmule
net/xnap
misc/ed2k
misc/edonkey-tool-hash
misc/linux-edonkey-tool-recovermet
Repocopies by: marcus
v. 1.16
date: 2005/12/12 19:29:59; author: lioux; state: Exp; lines: +7 -13
o Add working MASTER_SITES; thus, fixing BROKEN/DEPRECATED/EXPIRATION_DATE
o distfile has changed but the installed binary has the same md5
checksum as the one from the previous distfile
v. 1.15
date: 2005/10/11 19:17:34; author: linimon; state: Exp; lines: +5 -1
Mark as BROKEN: unfetchable.
Source: distfile survey
v. 1.14
date: 2005/06/17 22:59:20; author: netchild; state: Exp; lines: +1 -10
Mega-patch to cleanup the ports infrastructure regarding our linux bits:
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn
v. 1.13
date: 2005/05/28 14:33:25; author: pav; state: Exp; lines: +3 -0
- Add pkg-message with a note about limitation of this software with big files
PR: ports/74177, ports/81581
Submitted by: No Name
v. 1.12
date: 2005/03/13 01:18:38; author: lioux; state: Exp; lines: +1 -1
Drop maintainership
v. 1.11
date: 2005/03/01 21:51:41; author: trevor; state: Exp; lines: +1 -1
Respect the user's USE_LINUX setting.
v. 1.10
date: 2004/12/31 18:24:01; author: netchild; state: Exp; lines: +1 -0
Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX= specifies a dependency upon
emulators/linux_base-, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base- (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portv. of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
v. 1.9
date: 2004/12/25 11:43:51; author: lioux; state: Exp; lines: +0 -1
Remove deprecated USE_SIZE
v. 1.8
date: 2004/02/08 01:13:52; author: lioux; state: Exp; lines: +1 -0
USE_SIZEify
v. 1.7
date: 2004/02/06 13:11:50; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES (bento-tested, marcus-reviewed).
v. 1.6
date: 2003/06/02 15:13:33; author: lioux; state: Exp; lines: +0 -0
Forced commit to document repo copy for better name convention
edonkey-tool-recovermet -> linux-edonkey-tool-recovermet
Repo copy approved by: portmgr (self)
Repo copy done by: cvs (joe)
v. 1.5
date: 2003/04/29 01:57:13; author: lioux; state: Exp; lines: +1 -0
Add "PKGNAMEPREFIX=linux-" to linux binary ports
v. 1.4
date: 2003/02/23 19:58:23; author: lioux; state: Exp; lines: +1 -0
De-pkg-comment
v. 1.3
date: 2002/05/28 16:33:26; author: lioux; state: Exp; lines: +6 -4
After update of linux_base to 7.1 in rev 1.60, correct detection
of strip tool since it is not part of 7.1
v. 1.2
date: 2002/02/22 17:32:02; author: lioux; state: Exp; lines: +1 -1
Add linux as secondary category since this is a linux binary
v. 1.1
date: 2002/02/21 01:41:17; author: lioux; state: Exp;
New port edonkey-tool-recovermet version 0.0.2: Tool that tries to
re-create x.part.met files compromised due to crash
=============================================================================
|
| |
|