The FreeBSD Ports Archive

FreeBSD japanese : easypr

A control panel for printers (with Japanese messages)

 A control panel with Japanses messages for printers

First, we should do the next line to set up;
% easypr --setup
and $HOME/.printconf will be made.

To use this on a command line:
% easypr foo.jp.txt
or
% cat foo.jp.txt | lpr2

and, in an application, e.g. Netscape, you should specify ``lpr2''
instead of lpr.

-- S.TAOKA  

easypr history

v. 1.9
date: 2007/05/19 20:11:45;  author: flz;  state: Exp;  lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

v. 1.8
date: 2004/12/23 09:32:34;  author: nork;  state: Exp;  lines: +1 -1
Reset MAINTAINER to ports@.
We cannot contact them for a long time.

Discussed with:	hrs
Approved by:	kiri(blanket), mita(blanket),
		shige(blanket), taoka(blanket)

v. 1.7
date: 2003/03/07 06:04:44;  author: ade;  state: Exp;  lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

v. 1.6
date: 2002/01/29 11:08:48;  author: knu;  state: Exp;  lines: +1 -1
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;
the ECHO macro is set to "echo" by default, but it is set to "true" if
make(1) is invoked with the -s option while ECHO_CMD is always set to
the echo command.

Use command macros where appropriate.

v. 1.5
date: 2001/12/03 15:52:51;  author: taoka;  state: Exp;  lines: +9 -5
Update version to 0.70
Change from japanese/tk42 to japanese/tk80 in RUN_DEPENDS

v. 1.4
date: 2000/08/25 02:50:51;  author: taoka;  state: Exp;  lines: +5 -3
Updated to version 0.60

v. 1.3
date: 2000/04/11 14:13:08;  author: knu;  state: Exp;  lines: +4 -4
Update with the new PORT{NAME,VERSION}/PKGNAME{PRE,SUF}FIX variables.

Now try to use those variables everywhere around DIST* and PATCH*
definitions as far as possible, for ease of the future updates and the
neatness.

Okay, 60% of `japanese' ports have been done. :)

v. 1.2
date: 1999/10/25 03:57:16;  author: asami;  state: Exp;  lines: +2 -2
Remove extra ":" - it was causing syntax errors.

v. 1.1
date: 1999/10/22 05:30:46;  author: taoka;  state: Exp;
branches:  1.1.1;
Initial revision

v. 1.1.1.1
date: 1999/10/22 05:30:46;  author: taoka;  state: Exp;  lines: +0 -0
A control panel for printers (with Japanese messages)
=============================================================================


v. 1.9
date: 2007/05/19 20:11:45;  author: flz;  state: Exp;  lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

v. 1.8
date: 2004/12/23 09:32:34;  author: nork;  state: Exp;  lines: +1 -1
Reset MAINTAINER to ports@.
We cannot contact them for a long time.

Discussed with:	hrs
Approved by:	kiri(blanket), mita(blanket),
		shige(blanket), taoka(blanket)

v. 1.7
date: 2003/03/07 06:04:44;  author: ade;  state: Exp;  lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

v. 1.6
date: 2002/01/29 11:08:48;  author: knu;  state: Exp;  lines: +1 -1
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;
the ECHO macro is set to "echo" by default, but it is set to "true" if
make(1) is invoked with the -s option while ECHO_CMD is always set to
the echo command.

Use command macros where appropriate.

v. 1.5
date: 2001/12/03 15:52:51;  author: taoka;  state: Exp;  lines: +9 -5
Update version to 0.70
Change from japanese/tk42 to japanese/tk80 in RUN_DEPENDS

v. 1.4
date: 2000/08/25 02:50:51;  author: taoka;  state: Exp;  lines: +5 -3
Updated to version 0.60

v. 1.3
date: 2000/04/11 14:13:08;  author: knu;  state: Exp;  lines: +4 -4
Update with the new PORT{NAME,VERSION}/PKGNAME{PRE,SUF}FIX variables.

Now try to use those variables everywhere around DIST* and PATCH*
definitions as far as possible, for ease of the future updates and the
neatness.

Okay, 60% of `japanese' ports have been done. :)

v. 1.2
date: 1999/10/25 03:57:16;  author: asami;  state: Exp;  lines: +2 -2
Remove extra ":" - it was causing syntax errors.

v. 1.1
date: 1999/10/22 05:30:46;  author: taoka;  state: Exp;
branches:  1.1.1;
Initial revision

v. 1.1.1.1
date: 1999/10/22 05:30:46;  author: taoka;  state: Exp;  lines: +0 -0
A control panel for printers (with Japanese messages)
=============================================================================


v. 1.9
date: 2007/05/19 20:11:45;  author: flz;  state: Exp;  lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

v. 1.8
date: 2004/12/23 09:32:34;  author: nork;  state: Exp;  lines: +1 -1
Reset MAINTAINER to ports@.
We cannot contact them for a long time.

Discussed with:	hrs
Approved by:	kiri(blanket), mita(blanket),
		shige(blanket), taoka(blanket)

v. 1.7
date: 2003/03/07 06:04:44;  author: ade;  state: Exp;  lines: +1 -0
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

v. 1.6
date: 2002/01/29 11:08:48;  author: knu;  state: Exp;  lines: +1 -1
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;
the ECHO macro is set to "echo" by default, but it is set to "true" if
make(1) is invoked with the -s option while ECHO_CMD is always set to
the echo command.

Use command macros where appropriate.

v. 1.5
date: 2001/12/03 15:52:51;  author: taoka;  state: Exp;  lines: +9 -5
Update version to 0.70
Change from japanese/tk42 to japanese/tk80 in RUN_DEPENDS

v. 1.4
date: 2000/08/25 02:50:51;  author: taoka;  state: Exp;  lines: +5 -3
Updated to version 0.60

v. 1.3
date: 2000/04/11 14:13:08;  author: knu;  state: Exp;  lines: +4 -4
Update with the new PORT{NAME,VERSION}/PKGNAME{PRE,SUF}FIX variables.

Now try to use those variables everywhere around DIST* and PATCH*
definitions as far as possible, for ease of the future updates and the
neatness.

Okay, 60% of `japanese' ports have been done. :)

v. 1.2
date: 1999/10/25 03:57:16;  author: asami;  state: Exp;  lines: +2 -2
Remove extra ":" - it was causing syntax errors.

v. 1.1
date: 1999/10/22 05:30:46;  author: taoka;  state: Exp;
branches:  1.1.1;
Initial revision

v. 1.1.1.1
date: 1999/10/22 05:30:46;  author: taoka;  state: Exp;  lines: +0 -0
A control panel for printers (with Japanese messages)
=============================================================================