The FreeBSD Ports Archive
FreeBSD german  : linux-eagle
An easy to use, yet powerful tool for designing printed circuit boards
An easy to use, yet powerful tool for designing printed circuit boards
An easy to use, yet powerful tool for designing printed circuit boards
The EAGLE Layout Editor is an easy to use, yet powerful tool for designing
printed circuit boards (PCBs). The name EAGLE is an acronym, which stands for
Easily Applicable Graphical Layout Editor.
The program consists of three main modules:
o Layout Editor
o Schematic Editor
o Autorouter
which are embedded in a single user interface. Therefore there is no need for
converting netlists between schematics and layouts.
This is a Light Freeware Edition. It has the following limitations:
o The useable board area is limited to 100 x 80 mm (4 x 3.2 inches).
o Only two signal layers can be used (Top and Bottom).
o The schematic editor can only create one sheet.
o Support is only available via email or through our forum (no fax or phone
support).
o Use is limited to non-profit applications or evaluation purposes.
Apart from these limitiations the EAGLE Light Edition can do anything the
Professional Edition can do. You can even load, view and print drawings that
exceed these limits!
http://www.cadsoft.de
http://www.cadsoft.de
http://www.cadsoft.de
|
linux-eagle history
v. 1.12
date: 2006/02/02 14:18:46; author: barner; state: Exp; lines: +2 -1
- Update to 4.16 [1]
- Use foo-[0-9]* for CONFLICTS
Submitted by: "Thomas E. Zander" (maintainer)
PR: ports/92575
v. 1.11
date: 2005/04/05 18:53:06; author: linimon; state: Exp; lines: +3 -0
Add two advisory variables that mark this port as a slave port. Due to
odd use or misuse of .include, the default assignments of these variables
is wrong.
This only affects FreshPorts and portsmon.
Approved by: maintainer
v. 1.10
date: 2004/12/13 10:16:37; author: vs; state: Exp; lines: +1 -1
Update to 4.13
PR: ports/74539
Submitted by: Frank Mayhar
Approved by: maintainer
v. 1.9
date: 2003/10/14 11:41:41; author: daichi; state: Exp; lines: +2 -0
update german/linux-eagle: 4.09r2 -> 4.11
PR: 57853
Submitted by: Thomas E. Zander (maintainer)
v. 1.8
date: 2003/02/21 11:04:55; author: knu; state: Exp; lines: +3 -0
De-pkg-comment.
v. 1.7
date: 2002/09/19 15:14:33; author: obraun; state: Exp; lines: +7 -43
* Make german/linux-eagle slave port of cad/linux-eagle.
* Use german distfile for german/linux-eagle.
* Fix pkg-plist for german/linux-eagle.
* Use german website in german/linux-eagle.
Submitted by: maintainer
v. 1.6
date: 2002/08/27 16:09:32; author: lioux; state: Exp; lines: +1 -1
Assign maintainership to "Thomas E. Zander" per
request
v. 1.5
date: 2002/08/20 17:31:09; author: lioux; state: Exp; lines: +1 -1
Update to 4.09r2
PR: 41614
Submitted by: Thomas E. Zander
v. 1.4
date: 2002/08/03 10:57:04; author: mita; state: Exp; lines: +1 -1
A trivial modification. ${LINUXBASE}/lib/ld.so, referenced in Makefile,
no more exsists in the new linux_base (7.1) whereas it existed for
linux_base-6.1.
v. 1.3
date: 2002/05/22 11:34:42; author: sobomax; state: Exp; lines: +1 -1
Update to 4.09r1.
PR: 37898
Submitted by: Oliver Braun
v. 1.2
date: 2001/12/29 10:25:54; author: sobomax; state: Exp; lines: +6 -4
Add message explaining that after installation the user have to run the program
as root in order to create registration key in ${DATADIR}.
PR: 33286
Submitted by: David
v. 1.1
date: 2001/12/26 16:12:17; author: sobomax; state: Exp;
Add linux-eagle , an easy to use, yet powerful tool for designing
printed circuit boards.
=============================================================================
v. 1.12
date: 2006/02/02 14:18:46; author: barner; state: Exp; lines: +2 -1
- Update to 4.16 [1]
- Use foo-[0-9]* for CONFLICTS
Submitted by: "Thomas E. Zander" (maintainer)
PR: ports/92575
v. 1.11
date: 2005/04/05 18:53:06; author: linimon; state: Exp; lines: +3 -0
Add two advisory variables that mark this port as a slave port. Due to
odd use or misuse of .include, the default assignments of these variables
is wrong.
This only affects FreshPorts and portsmon.
Approved by: maintainer
v. 1.10
date: 2004/12/13 10:16:37; author: vs; state: Exp; lines: +1 -1
Update to 4.13
PR: ports/74539
Submitted by: Frank Mayhar
Approved by: maintainer
v. 1.9
date: 2003/10/14 11:41:41; author: daichi; state: Exp; lines: +2 -0
update german/linux-eagle: 4.09r2 -> 4.11
PR: 57853
Submitted by: Thomas E. Zander (maintainer)
v. 1.8
date: 2003/02/21 11:04:55; author: knu; state: Exp; lines: +3 -0
De-pkg-comment.
v. 1.7
date: 2002/09/19 15:14:33; author: obraun; state: Exp; lines: +7 -43
* Make german/linux-eagle slave port of cad/linux-eagle.
* Use german distfile for german/linux-eagle.
* Fix pkg-plist for german/linux-eagle.
* Use german website in german/linux-eagle.
Submitted by: maintainer
v. 1.6
date: 2002/08/27 16:09:32; author: lioux; state: Exp; lines: +1 -1
Assign maintainership to "Thomas E. Zander" per
request
v. 1.5
date: 2002/08/20 17:31:09; author: lioux; state: Exp; lines: +1 -1
Update to 4.09r2
PR: 41614
Submitted by: Thomas E. Zander
v. 1.4
date: 2002/08/03 10:57:04; author: mita; state: Exp; lines: +1 -1
A trivial modification. ${LINUXBASE}/lib/ld.so, referenced in Makefile,
no more exsists in the new linux_base (7.1) whereas it existed for
linux_base-6.1.
v. 1.3
date: 2002/05/22 11:34:42; author: sobomax; state: Exp; lines: +1 -1
Update to 4.09r1.
PR: 37898
Submitted by: Oliver Braun
v. 1.2
date: 2001/12/29 10:25:54; author: sobomax; state: Exp; lines: +6 -4
Add message explaining that after installation the user have to run the program
as root in order to create registration key in ${DATADIR}.
PR: 33286
Submitted by: David
v. 1.1
date: 2001/12/26 16:12:17; author: sobomax; state: Exp;
Add linux-eagle , an easy to use, yet powerful tool for designing
printed circuit boards.
=============================================================================
v. 1.12
date: 2006/02/02 14:18:46; author: barner; state: Exp; lines: +2 -1
- Update to 4.16 [1]
- Use foo-[0-9]* for CONFLICTS
Submitted by: "Thomas E. Zander" (maintainer)
PR: ports/92575
v. 1.11
date: 2005/04/05 18:53:06; author: linimon; state: Exp; lines: +3 -0
Add two advisory variables that mark this port as a slave port. Due to
odd use or misuse of .include, the default assignments of these variables
is wrong.
This only affects FreshPorts and portsmon.
Approved by: maintainer
v. 1.10
date: 2004/12/13 10:16:37; author: vs; state: Exp; lines: +1 -1
Update to 4.13
PR: ports/74539
Submitted by: Frank Mayhar
Approved by: maintainer
v. 1.9
date: 2003/10/14 11:41:41; author: daichi; state: Exp; lines: +2 -0
update german/linux-eagle: 4.09r2 -> 4.11
PR: 57853
Submitted by: Thomas E. Zander (maintainer)
v. 1.8
date: 2003/02/21 11:04:55; author: knu; state: Exp; lines: +3 -0
De-pkg-comment.
v. 1.7
date: 2002/09/19 15:14:33; author: obraun; state: Exp; lines: +7 -43
* Make german/linux-eagle slave port of cad/linux-eagle.
* Use german distfile for german/linux-eagle.
* Fix pkg-plist for german/linux-eagle.
* Use german website in german/linux-eagle.
Submitted by: maintainer
v. 1.6
date: 2002/08/27 16:09:32; author: lioux; state: Exp; lines: +1 -1
Assign maintainership to "Thomas E. Zander" per
request
v. 1.5
date: 2002/08/20 17:31:09; author: lioux; state: Exp; lines: +1 -1
Update to 4.09r2
PR: 41614
Submitted by: Thomas E. Zander
v. 1.4
date: 2002/08/03 10:57:04; author: mita; state: Exp; lines: +1 -1
A trivial modification. ${LINUXBASE}/lib/ld.so, referenced in Makefile,
no more exsists in the new linux_base (7.1) whereas it existed for
linux_base-6.1.
v. 1.3
date: 2002/05/22 11:34:42; author: sobomax; state: Exp; lines: +1 -1
Update to 4.09r1.
PR: 37898
Submitted by: Oliver Braun
v. 1.2
date: 2001/12/29 10:25:54; author: sobomax; state: Exp; lines: +6 -4
Add message explaining that after installation the user have to run the program
as root in order to create registration key in ${DATADIR}.
PR: 33286
Submitted by: David
v. 1.1
date: 2001/12/26 16:12:17; author: sobomax; state: Exp;
Add linux-eagle , an easy to use, yet powerful tool for designing
printed circuit boards.
=============================================================================
|
| |
|