The FreeBSD Ports Archive
FreeBSD french  : med
Modelisation et Echanges de Donnees
MED stands for "Modélisation et Échanges de Données", i.e. Data Modelization
and Exchanges.
MED « fichier », c'est :
* Un modèle d'échange de données commun centré sur les notions de
maillage et de résultat. Ce modèle décrit quelles sont les données
exportées et échangées entre les codes.
* Une API (Application Programming Interface) d'accès aux données
qui se présente sous la forme d'une bibliothèque informatique écrite
en C et FORTRAN 77. Cette bibliothèque est distribuée sous licence
GNU LGPL.
* Des données échangées et stockées dans des fichiers au format HDF
(Hierarchical Data Format).
http://www.code-aster.org/outils/med/
|
med history
v. 1.23
date: 2007/09/30 04:46:50; author: linimon; state: Exp; lines: +2 -2
Switch autoconf dependencies from 2.53 or 2.59 to 2.61.
PR: ports/116639
Submitted by: aDe
v. 1.22
date: 2007/07/14 10:02:06; author: maho; state: Exp; lines: +1 -4
Now we use USE_FORTRAN=yes to use FORTRAN compiler.
v. 1.21
date: 2007/05/19 20:05:02; author: flz; state: Exp; lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.20
date: 2007/01/25 22:33:32; author: thierry; state: Exp; lines: +2 -2
Fix plist: since the gfortran migration, some tests are no more installed.
Reported by: pointyhat via pav
v. 1.19
date: 2007/01/17 06:06:55; author: maho; state: Exp; lines: +12 -13
* Migrate to gfortran.
* Bump port revision.
* Always use F90.
v. 1.18
date: 2006/12/12 18:24:23; author: thierry; state: Exp; lines: +12 -5
- Upgrade MED to 2.3.1;
- Assign better CATEGORIES;
- Support gfortran;
- Add a regression-test target.
v. 1.17
date: 2006/08/14 23:06:29; author: clsung; state: Exp; lines: +1 -1
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
games/ graphics/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin
v. 1.16
date: 2006/06/07 13:33:22; author: sat; state: Exp; lines: +1 -1
- Limit INDEX contents to 7-bit ASCII characters for greater compatibility
v. 1.15
date: 2006/05/07 11:09:16; author: edwin; state: Exp; lines: +0 -1
Remove USE_REINPLACE from all categories starting with F
v. 1.14
date: 2006/02/23 10:36:31; author: ade; state: Exp; lines: +2 -2
Conversion to a single libtool environment.
Approved by: portmgr (kris)
v. 1.13
date: 2006/01/21 09:01:47; author: thierry; state: Exp; lines: +3 -1
- Fix plist [1]
- Fix xmdump.
Reported by: pointyhat via Kris [1]
v. 1.12
date: 2006/01/15 23:15:21; author: thierry; state: Exp; lines: +1 -1
Upgrade to 2.2.3.
v. 1.11
date: 2005/11/15 06:49:14; author: ade; state: Exp; lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
v. 1.10
date: 2005/04/12 03:25:28; author: obrien; state: Exp; lines: +1 -1
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
v. 1.9
date: 2005/04/11 08:02:16; author: obrien; state: Exp; lines: +1 -1
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
v. 1.8
date: 2005/01/17 21:08:51; author: thierry; state: Exp; lines: +35 -29
Upgrade to 2.2.2.
v. 1.7
date: 2004/07/09 17:42:23; author: marcus; state: Exp; lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
v. 1.6
date: 2004/04/28 20:30:20; author: thierry; state: Exp; lines: +13 -5
Fix pkg-plist and install examples.
Noticed on dosirak & bento.
Approved by: mat (mentor).
v. 1.5
date: 2004/03/14 06:16:31; author: ade; state: Exp; lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
v. 1.4
date: 2004/02/25 22:55:54; author: pav; state: Exp; lines: +1 -1
Chase repomove graphics/hdf* -> science/hdf*
v. 1.3
date: 2004/02/04 05:20:12; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
v. 1.2
date: 2003/12/10 23:09:50; author: pav; state: Exp; lines: +2 -2
- www.code-aster.org was reorganized. fix fetching
PR: ports/60121
Submitted by: Thierry Thomas
v. 1.1
date: 2003/07/23 14:35:27; author: oliver; state: Exp;
Add med 2.1.5, modélisation et Échanges de Données.
PR: 54761
Submitted by: thierry@pompo.net
=============================================================================
v. 1.23
date: 2007/09/30 04:46:50; author: linimon; state: Exp; lines: +2 -2
Switch autoconf dependencies from 2.53 or 2.59 to 2.61.
PR: ports/116639
Submitted by: aDe
v. 1.22
date: 2007/07/14 10:02:06; author: maho; state: Exp; lines: +1 -4
Now we use USE_FORTRAN=yes to use FORTRAN compiler.
v. 1.21
date: 2007/05/19 20:05:02; author: flz; state: Exp; lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.20
date: 2007/01/25 22:33:32; author: thierry; state: Exp; lines: +2 -2
Fix plist: since the gfortran migration, some tests are no more installed.
Reported by: pointyhat via pav
v. 1.19
date: 2007/01/17 06:06:55; author: maho; state: Exp; lines: +12 -13
* Migrate to gfortran.
* Bump port revision.
* Always use F90.
v. 1.18
date: 2006/12/12 18:24:23; author: thierry; state: Exp; lines: +12 -5
- Upgrade MED to 2.3.1;
- Assign better CATEGORIES;
- Support gfortran;
- Add a regression-test target.
v. 1.17
date: 2006/08/14 23:06:29; author: clsung; state: Exp; lines: +1 -1
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
games/ graphics/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin
v. 1.16
date: 2006/06/07 13:33:22; author: sat; state: Exp; lines: +1 -1
- Limit INDEX contents to 7-bit ASCII characters for greater compatibility
v. 1.15
date: 2006/05/07 11:09:16; author: edwin; state: Exp; lines: +0 -1
Remove USE_REINPLACE from all categories starting with F
v. 1.14
date: 2006/02/23 10:36:31; author: ade; state: Exp; lines: +2 -2
Conversion to a single libtool environment.
Approved by: portmgr (kris)
v. 1.13
date: 2006/01/21 09:01:47; author: thierry; state: Exp; lines: +3 -1
- Fix plist [1]
- Fix xmdump.
Reported by: pointyhat via Kris [1]
v. 1.12
date: 2006/01/15 23:15:21; author: thierry; state: Exp; lines: +1 -1
Upgrade to 2.2.3.
v. 1.11
date: 2005/11/15 06:49:14; author: ade; state: Exp; lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
v. 1.10
date: 2005/04/12 03:25:28; author: obrien; state: Exp; lines: +1 -1
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
v. 1.9
date: 2005/04/11 08:02:16; author: obrien; state: Exp; lines: +1 -1
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
v. 1.8
date: 2005/01/17 21:08:51; author: thierry; state: Exp; lines: +35 -29
Upgrade to 2.2.2.
v. 1.7
date: 2004/07/09 17:42:23; author: marcus; state: Exp; lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
v. 1.6
date: 2004/04/28 20:30:20; author: thierry; state: Exp; lines: +13 -5
Fix pkg-plist and install examples.
Noticed on dosirak & bento.
Approved by: mat (mentor).
v. 1.5
date: 2004/03/14 06:16:31; author: ade; state: Exp; lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
v. 1.4
date: 2004/02/25 22:55:54; author: pav; state: Exp; lines: +1 -1
Chase repomove graphics/hdf* -> science/hdf*
v. 1.3
date: 2004/02/04 05:20:12; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
v. 1.2
date: 2003/12/10 23:09:50; author: pav; state: Exp; lines: +2 -2
- www.code-aster.org was reorganized. fix fetching
PR: ports/60121
Submitted by: Thierry Thomas
v. 1.1
date: 2003/07/23 14:35:27; author: oliver; state: Exp;
Add med 2.1.5, modélisation et Échanges de Données.
PR: 54761
Submitted by: thierry@pompo.net
=============================================================================
v. 1.23
date: 2007/09/30 04:46:50; author: linimon; state: Exp; lines: +2 -2
Switch autoconf dependencies from 2.53 or 2.59 to 2.61.
PR: ports/116639
Submitted by: aDe
v. 1.22
date: 2007/07/14 10:02:06; author: maho; state: Exp; lines: +1 -4
Now we use USE_FORTRAN=yes to use FORTRAN compiler.
v. 1.21
date: 2007/05/19 20:05:02; author: flz; state: Exp; lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
v. 1.20
date: 2007/01/25 22:33:32; author: thierry; state: Exp; lines: +2 -2
Fix plist: since the gfortran migration, some tests are no more installed.
Reported by: pointyhat via pav
v. 1.19
date: 2007/01/17 06:06:55; author: maho; state: Exp; lines: +12 -13
* Migrate to gfortran.
* Bump port revision.
* Always use F90.
v. 1.18
date: 2006/12/12 18:24:23; author: thierry; state: Exp; lines: +12 -5
- Upgrade MED to 2.3.1;
- Assign better CATEGORIES;
- Support gfortran;
- Add a regression-test target.
v. 1.17
date: 2006/08/14 23:06:29; author: clsung; state: Exp; lines: +1 -1
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
games/ graphics/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin
v. 1.16
date: 2006/06/07 13:33:22; author: sat; state: Exp; lines: +1 -1
- Limit INDEX contents to 7-bit ASCII characters for greater compatibility
v. 1.15
date: 2006/05/07 11:09:16; author: edwin; state: Exp; lines: +0 -1
Remove USE_REINPLACE from all categories starting with F
v. 1.14
date: 2006/02/23 10:36:31; author: ade; state: Exp; lines: +2 -2
Conversion to a single libtool environment.
Approved by: portmgr (kris)
v. 1.13
date: 2006/01/21 09:01:47; author: thierry; state: Exp; lines: +3 -1
- Fix plist [1]
- Fix xmdump.
Reported by: pointyhat via Kris [1]
v. 1.12
date: 2006/01/15 23:15:21; author: thierry; state: Exp; lines: +1 -1
Upgrade to 2.2.3.
v. 1.11
date: 2005/11/15 06:49:14; author: ade; state: Exp; lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
v. 1.10
date: 2005/04/12 03:25:28; author: obrien; state: Exp; lines: +1 -1
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
v. 1.9
date: 2005/04/11 08:02:16; author: obrien; state: Exp; lines: +1 -1
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
v. 1.8
date: 2005/01/17 21:08:51; author: thierry; state: Exp; lines: +35 -29
Upgrade to 2.2.2.
v. 1.7
date: 2004/07/09 17:42:23; author: marcus; state: Exp; lines: +1 -1
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
v. 1.6
date: 2004/04/28 20:30:20; author: thierry; state: Exp; lines: +13 -5
Fix pkg-plist and install examples.
Noticed on dosirak & bento.
Approved by: mat (mentor).
v. 1.5
date: 2004/03/14 06:16:31; author: ade; state: Exp; lines: +1 -1
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
v. 1.4
date: 2004/02/25 22:55:54; author: pav; state: Exp; lines: +1 -1
Chase repomove graphics/hdf* -> science/hdf*
v. 1.3
date: 2004/02/04 05:20:12; author: marcus; state: Exp; lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
v. 1.2
date: 2003/12/10 23:09:50; author: pav; state: Exp; lines: +2 -2
- www.code-aster.org was reorganized. fix fetching
PR: ports/60121
Submitted by: Thierry Thomas
v. 1.1
date: 2003/07/23 14:35:27; author: oliver; state: Exp;
Add med 2.1.5, modélisation et Échanges de Données.
PR: 54761
Submitted by: thierry@pompo.net
=============================================================================
|
| |
|