The FreeBSD Ports Archive
FreeBSD emulators  : linux-pete-mesagpu
A PSEmu Pro GPU plugin using an OpenGL renderer (Linux version)
Pete's MesaGL GPU is a PSEmu Pro GPU plugin using a
hardware-accelerated OpenGL renderer.
This is the Linux version, tested with emulators/linux-ePSXe.
http://www.pbernert.com/
|
linux-pete-mesagpu history
v. 1.12
date: 2006/01/27 07:54:31; author: jylefort; state: Exp; lines: +1 -1
Add amd64 to ONLY_FOR_ARCHS
PR: ports/92400
Submitted by: Yuri Pankov
v. 1.11
date: 2005/07/23 10:25:02; author: netchild; state: Exp; lines: +8 -2
linux_mesa3 (deprecatred) -> linux_dri (possibly hardware accelerated)
I assume the maintainer overlooked this port in the patchset, since
he already committed a similar change to another port and didn't
objected to any patch in the patchset. So I take a shortcut and just
commit the patch instead of further delaying the move from linux_mesa3
to linux_dri.
Submitted by: Ulrich Spoerlein
Approved by: maintainer timeout (a week and a half)
v. 1.10
date: 2005/07/16 15:07:32; author: jylefort; state: Exp; lines: +3 -9
- Update to 1.76
- Polish the Makefile
v. 1.9
date: 2005/06/17 22:59:07; author: netchild; state: Exp; lines: +6 -8
Mega-patch to cleanup the ports infrastructure regarding our linux bits:
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn
v. 1.8
date: 2005/04/12 22:10:38; author: jylefort; state: Exp; lines: +1 -1
Change my MAINTAINER email address to jylefort@FreeBSD.org
Approved by: adamw (mentor)
v. 1.7
date: 2005/03/01 21:51:29; author: trevor; state: Exp; lines: +0 -1
Respect the user's USE_LINUX setting.
v. 1.6
date: 2005/02/20 10:31:07; author: netchild; state: Exp; lines: +2 -2
- Use a binary RPM of Mesa v3 instead of building it from source:
* get's rid of the linux_devtools dependency
* fixes the conflicts seen at deinstall time on pointyhat
- correct the paths for the GL/GLU libs in the dependencies (the RPM
installs the mesa libs to .../lib/ instead to .../X11R6/lib/)
Nagging by: pointyhat
v. 1.5
date: 2005/01/29 20:46:24; author: pav; state: Exp; lines: +7 -3
- Fix uninstall, cleanup
PR: ports/76599
Submitted by: Jean-Yves Lefort (maintainer)
v. 1.4
date: 2004/12/31 18:23:49; author: netchild; state: Exp; lines: +2 -0
Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX= specifies a dependency upon
emulators/linux_base-, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base- (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portv. of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
v. 1.3
date: 2003/12/26 23:17:58; author: pav; state: Exp; lines: +8 -10
- Update to 1.75
PR: ports/59673
Submitted by: Jean-Yves Lefort (maintainer)
v. 1.2
date: 2003/02/21 11:58:59; author: knu; state: Exp; lines: +1 -0
De-pkg-comment.
v. 1.1
date: 2003/01/13 08:44:00; author: edwin; state: Exp;
New port: emulators/linux-pete-mesagpu
This is Pete's MesaGL GPU, a PSEmu Pro GPU plugin.
Tested on the above system with emulators/linux-ePSXe (ports/46240).
PR: ports/46482
Submitted by: Jean-Yves Lefort
=============================================================================
v. 1.12
date: 2006/01/27 07:54:31; author: jylefort; state: Exp; lines: +1 -1
Add amd64 to ONLY_FOR_ARCHS
PR: ports/92400
Submitted by: Yuri Pankov
v. 1.11
date: 2005/07/23 10:25:02; author: netchild; state: Exp; lines: +8 -2
linux_mesa3 (deprecatred) -> linux_dri (possibly hardware accelerated)
I assume the maintainer overlooked this port in the patchset, since
he already committed a similar change to another port and didn't
objected to any patch in the patchset. So I take a shortcut and just
commit the patch instead of further delaying the move from linux_mesa3
to linux_dri.
Submitted by: Ulrich Spoerlein
Approved by: maintainer timeout (a week and a half)
v. 1.10
date: 2005/07/16 15:07:32; author: jylefort; state: Exp; lines: +3 -9
- Update to 1.76
- Polish the Makefile
v. 1.9
date: 2005/06/17 22:59:07; author: netchild; state: Exp; lines: +6 -8
Mega-patch to cleanup the ports infrastructure regarding our linux bits:
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn
v. 1.8
date: 2005/04/12 22:10:38; author: jylefort; state: Exp; lines: +1 -1
Change my MAINTAINER email address to jylefort@FreeBSD.org
Approved by: adamw (mentor)
v. 1.7
date: 2005/03/01 21:51:29; author: trevor; state: Exp; lines: +0 -1
Respect the user's USE_LINUX setting.
v. 1.6
date: 2005/02/20 10:31:07; author: netchild; state: Exp; lines: +2 -2
- Use a binary RPM of Mesa v3 instead of building it from source:
* get's rid of the linux_devtools dependency
* fixes the conflicts seen at deinstall time on pointyhat
- correct the paths for the GL/GLU libs in the dependencies (the RPM
installs the mesa libs to .../lib/ instead to .../X11R6/lib/)
Nagging by: pointyhat
v. 1.5
date: 2005/01/29 20:46:24; author: pav; state: Exp; lines: +7 -3
- Fix uninstall, cleanup
PR: ports/76599
Submitted by: Jean-Yves Lefort (maintainer)
v. 1.4
date: 2004/12/31 18:23:49; author: netchild; state: Exp; lines: +2 -0
Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX= specifies a dependency upon
emulators/linux_base-, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base- (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portv. of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
v. 1.3
date: 2003/12/26 23:17:58; author: pav; state: Exp; lines: +8 -10
- Update to 1.75
PR: ports/59673
Submitted by: Jean-Yves Lefort (maintainer)
v. 1.2
date: 2003/02/21 11:58:59; author: knu; state: Exp; lines: +1 -0
De-pkg-comment.
v. 1.1
date: 2003/01/13 08:44:00; author: edwin; state: Exp;
New port: emulators/linux-pete-mesagpu
This is Pete's MesaGL GPU, a PSEmu Pro GPU plugin.
Tested on the above system with emulators/linux-ePSXe (ports/46240).
PR: ports/46482
Submitted by: Jean-Yves Lefort
=============================================================================
v. 1.12
date: 2006/01/27 07:54:31; author: jylefort; state: Exp; lines: +1 -1
Add amd64 to ONLY_FOR_ARCHS
PR: ports/92400
Submitted by: Yuri Pankov
v. 1.11
date: 2005/07/23 10:25:02; author: netchild; state: Exp; lines: +8 -2
linux_mesa3 (deprecatred) -> linux_dri (possibly hardware accelerated)
I assume the maintainer overlooked this port in the patchset, since
he already committed a similar change to another port and didn't
objected to any patch in the patchset. So I take a shortcut and just
commit the patch instead of further delaying the move from linux_mesa3
to linux_dri.
Submitted by: Ulrich Spoerlein
Approved by: maintainer timeout (a week and a half)
v. 1.10
date: 2005/07/16 15:07:32; author: jylefort; state: Exp; lines: +3 -9
- Update to 1.76
- Polish the Makefile
v. 1.9
date: 2005/06/17 22:59:07; author: netchild; state: Exp; lines: +6 -8
Mega-patch to cleanup the ports infrastructure regarding our linux bits:
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn
v. 1.8
date: 2005/04/12 22:10:38; author: jylefort; state: Exp; lines: +1 -1
Change my MAINTAINER email address to jylefort@FreeBSD.org
Approved by: adamw (mentor)
v. 1.7
date: 2005/03/01 21:51:29; author: trevor; state: Exp; lines: +0 -1
Respect the user's USE_LINUX setting.
v. 1.6
date: 2005/02/20 10:31:07; author: netchild; state: Exp; lines: +2 -2
- Use a binary RPM of Mesa v3 instead of building it from source:
* get's rid of the linux_devtools dependency
* fixes the conflicts seen at deinstall time on pointyhat
- correct the paths for the GL/GLU libs in the dependencies (the RPM
installs the mesa libs to .../lib/ instead to .../X11R6/lib/)
Nagging by: pointyhat
v. 1.5
date: 2005/01/29 20:46:24; author: pav; state: Exp; lines: +7 -3
- Fix uninstall, cleanup
PR: ports/76599
Submitted by: Jean-Yves Lefort (maintainer)
v. 1.4
date: 2004/12/31 18:23:49; author: netchild; state: Exp; lines: +2 -0
Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX= specifies a dependency upon
emulators/linux_base-, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base- (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portv. of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
v. 1.3
date: 2003/12/26 23:17:58; author: pav; state: Exp; lines: +8 -10
- Update to 1.75
PR: ports/59673
Submitted by: Jean-Yves Lefort (maintainer)
v. 1.2
date: 2003/02/21 11:58:59; author: knu; state: Exp; lines: +1 -0
De-pkg-comment.
v. 1.1
date: 2003/01/13 08:44:00; author: edwin; state: Exp;
New port: emulators/linux-pete-mesagpu
This is Pete's MesaGL GPU, a PSEmu Pro GPU plugin.
Tested on the above system with emulators/linux-ePSXe (ports/46240).
PR: ports/46482
Submitted by: Jean-Yves Lefort
=============================================================================
|
| |
|