The FreeBSD Ports Archive
FreeBSD converters  : uudx
Extractor from uuencoded files
uudx history
v. 1.17
date: 2006/05/03 23:38:40; author: edwin; state: Exp; lines: +0 -1
remove USE_REINPLACE for all ports with categories starting with C
v. 1.16
date: 2004/10/13 01:36:07; author: leeym; state: Exp; lines: +6 -8
- unbreak on 5.x
PR: 72034
Submitted by: leeym
Approved by: maintainer timeout
v. 1.15
date: 2004/09/29 05:37:49; author: kris; state: Exp; lines: +7 -1
BROKEN on 5.x: Does not compile
Approved by: portmgr (self)
v. 1.14
date: 2004/02/25 14:19:57; author: sanpei; state: Exp; lines: +2 -2
Fix build: replace BUILD_DEPENDS with EXTRACT_DEPENDS where appropriate
v. 1.13
date: 2004/02/06 13:10:59; author: trevor; state: Exp; lines: +1 -0
Use PLIST_FILES (bento-tested, marcus-reviewed).
v. 1.12
date: 2003/02/21 11:08:38; author: knu; state: Exp; lines: +2 -1
De-pkg-comment.
v. 1.11
date: 2000/04/08 23:24:41; author: mharo; state: Exp; lines: +4 -4
update with the new PORTNAME/PORTVERSION variables
v. 1.10
date: 2000/02/21 17:06:41; author: taoka; state: Exp; lines: +4 -3
Fix MASTER_SITES
PR: 16867
Submitted by: KATO Tsuguru
No response from: maintainer
v. 1.9
date: 1999/08/25 05:16:33; author: obrien; state: Exp; lines: +1 -1
Change Id->FreeBSD.
v. 1.8
date: 1999/02/03 11:11:41; author: asami; state: Exp; lines: +2 -1
Adjust port Makefiles to new EXTRACT_* variable defaults. See log of
bsd.port.mk rev. 1.304 for details on the change.
The fix here is one of the following.
(1) Define USE_BZIP2 instead of BUILD_DEPENDS on bzip2 and redefining
EXTRACT_* commands.
(2) Change ${EXTRACT_CMD} to ${TAR} when the command is obviously
calling the "tar" command (i.e., arguments like "-xzf" are spelled
out).
(3) If ${EXTRACT_CMD} is called directly with ${EXTRACT_BEFORE_ARGS},
add ${EXTRACT_AFTER_ARGS} to the command line as well.
(4) If any of EXTRACT_CMD, EXTRACT_BEFORE_ARGS or EXTRACT_AFTER_ARGS
is set, define the other two too.
v. 1.7
date: 1998/04/05 04:46:02; author: max; state: Exp; lines: +2 -2
Move the man pages to ${PREFIX}/man/ja from ja_JP.EUC.
Forgotten by: whomever changed man/ja_JP.EUC -> man/ja in BSD.local.dist
v. 1.6
date: 1997/09/14 17:32:19; author: max; state: Exp; lines: +3 -3
Add `q' to EXTRACT_BEFORE_ARGS so that lha will do its work quietly.
echo -> ${ECHO_MSG}.
v. 1.5
date: 1997/09/14 17:17:04; author: max; state: Exp; lines: +6 -4
Update the maintainer's address (I remember him asking his address in
the handbook to be updated.)
Style fix:
- Insert a blank (`3' only) line before the $Id$ line.
- Move EXTRACT_SUFX to proper place.
- Regenerate the patch file and remove the definition of PATCH_STRIP.
- Correctly define MANLANG and MAN1.
v. 1.4
date: 1997/04/26 23:55:24; author: asami; state: Exp; lines: +2 -2
This is a new category for non-archival, non-encryption character code
converters.
v. 1.3
date: 1996/12/06 22:46:32; author: asami; state: Exp; lines: +3 -2
Move man page from ja_JP.sjis to ja_JP.EUC. (Yes, I converted it, these
codes are actually different.)
v. 1.2
date: 1996/11/12 02:17:54; author: obrien; state: Exp; lines: +3 -4
CATAGORIES+= -> CATAGORIES=
Reordered vars where needed. Added MAINTAINERS where needed, many
mkdir --> ${MKDIR}, install -> ${INSTALL_*}, etc.
v. 1.1
date: 1996/06/10 01:49:44; author: asami; state: Exp;
branches: 1.1.1;
Initial revision
v. 1.1.1.1
date: 1996/06/10 01:49:44; author: asami; state: Exp; lines: +0 -0
This decoder can patch together split and out-of-order uudecode files.
Submitted by: pcs51674@asciinet.or.jp
=============================================================================
|
| |
|