The FreeBSD Ports Archive

FreeBSD cad : varkon

A free CAD system and applications development tool

 VARKON can be used as a traditional CAD-system with drafting, modelling 
and visualization if you want to but the real power of VARKON is in 
parametric modelling and CAD applications development. VARKON includes 
interactive parametric modelling in 2D or 3D but also the unique MBS 
programming language integrated in the graphical environment.

The system was originally developed by a group at the University of 
Linkoping in Sweden during 1984-86 under the leadership of Dr. Johan 
Kjellander who was then the president of Microform AB. From 1986 the 
system was owned, marketed and further developed by Microform AB. The 
sourcecode of VARKON is now maintained by the CAD research group at the 
Department of Technology at Orebro University in Sweden. 

varkon history

v. 1.9
date: 2007/07/03 09:32:54;  author: pav;  state: Exp;  lines: +7 -1
- Mark BROKEN on CURRENT: does not build with GCC 4.2

v. 1.8
date: 2007/05/19 20:00:37;  author: flz;  state: Exp;  lines: +1 -1
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

v. 1.7
date: 2006/11/30 16:07:11;  author: rafan;  state: Exp;  lines: +2 -0
- Respect X11BASE

Reported by:	pointyhat

v. 1.6
date: 2006/05/03 23:38:30;  author: edwin;  state: Exp;  lines: +0 -1
remove USE_REINPLACE for all ports with categories starting with C

v. 1.5
date: 2004/05/02 23:58:07;  author: kris;  state: Exp;  lines: +1 -1
unzip is only used in the install phase, so it's a BUILD_DEPENDS, not an
EXTRACT_DEPENDS

v. 1.4
date: 2004/02/04 05:18:53;  author: marcus;  state: Exp;  lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

v. 1.3
date: 2003/12/10 13:31:00;  author: fjoe;  state: Exp;  lines: +1 -1
USE_MESA -> USE_GL

v. 1.2
date: 2003/07/07 23:35:33;  author: maho;  state: Exp;  lines: +29 -14
a. This patch adds the documentation and makes
   other changes to make the program easier to configure and use.
b. Drop the maintainership.

PR:		53603
Submitted by:	Pedro F. Giffuni 

v. 1.1
date: 2003/05/20 23:03:36;  author: edwin;  state: Exp;
NEW port CAD/varkon

	A free CAD system and high level development tool for
	Engineering. It's a very interesting port for some branches
	of engineering.

PR:		ports/52202
Submitted by:	Pedro F. Giffuni 
=============================================================================