The FreeBSD Ports Archive

FreeBSD cad : gwave

Waveform viewer for analogue electronic simulation tools

 Gwave is a waveform viewer. Its purpose is for viewing analog data,
such as the output from Spice-like simulations.

Gwave can read binary or ascii files written by HSpice from transient,
AC, or Sweep analyses, "raw" files written by Spice2, Spice3, or
ngspice, and transient analysis files from the CAzM simulator. It can
also read a generic tabular ASCII format suitable for use with ACS or
homegrown tools.

It supports multiple "panels" (graticlules) with multiple variables
displayed in each. Two vertical-bar cursors are available for
time-difference measurements. Multiple files can be loaded, for
comparing the results of several simulations.

Much of Gwave's user interface is written in the Guile extension
language and is therefore easily extensible for custom applications
without recompilation. 

gwave history

v. 1.18
date: 2007/05/19 20:00:32;  author: flz;  state: Exp;  lines: +1 -0
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

v. 1.17
date: 2007/03/20 07:43:27;  author: stas;  state: Exp;  lines: +3 -5
- Update to 20060606.

v. 1.16
date: 2006/07/13 01:18:35;  author: shaun;  state: Exp;  lines: +42 -9
- Update to 20051222 release (fixes build on FreeBSD >= 5.x)
- Pass maintainership to submitter
- Add OPTIONS

PR:		ports/99386
Submitted by:	Stanislav Sedov 
Approved by:	Duncan Barclay  (maintainer),
		ahze (mentor, implicit)

v. 1.15
date: 2006/03/07 08:25:58;  author: ade;  state: Exp;  lines: +1 -1
Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with:	kris
Approved by:	portmgr (implicit)

v. 1.14
date: 2005/11/15 06:48:11;  author: ade;  state: Exp;  lines: +1 -1
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

v. 1.13
date: 2004/03/07 14:51:38;  author: pav;  state: Exp;  lines: +2 -4
- This is not using libgeda at all, so don't depend on it

v. 1.12
date: 2004/02/04 05:18:52;  author: marcus;  state: Exp;  lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

v. 1.11
date: 2003/12/19 10:47:13;  author: linimon;  state: Exp;  lines: +7 -1
Mark as broken on 5.x due to the usual gcc problems (string continuation).
Notified maintainer.

v. 1.10
date: 2003/10/15 08:06:26;  author: linimon;  state: Exp;  lines: +4 -5
Update to 20030804, unbreak, and fix plist.

PR:		ports/57582
Submitted by:	linimon@lonesome.com
Reviewed by:	maintainer (dmlb@dmlb.org)

v. 1.9
date: 2003/08/08 04:40:38;  author: kris;  state: Exp;  lines: +0 -0
This port is scheduled for removal on Nov 7 2003 if it is still broken at
that time and no PRs have been submitted to fix it.  If you are interested
in saving this port, please send your patches to the maintainer.  If the
maintainer is unresponsive or the port has no maintainer, then please
submit them via send-pr.

v. 1.8
date: 2003/06/04 17:46:29;  author: kris;  state: Exp;  lines: +1 -5
Mark BROKEN on all versions, not just 5.1

v. 1.7
date: 2003/05/18 12:28:05;  author: kris;  state: Exp;  lines: +7 -1
BROKEN on 5.1: does not compile

v. 1.6
date: 2003/05/12 20:25:27;  author: marcus;  state: Exp;  lines: +1 -1
Chase the libgeda shared lib version.

v. 1.5
date: 2003/05/02 03:28:58;  author: marcus;  state: Exp;  lines: +1 -1
Chase guile's shared lib version.

v. 1.4
date: 2003/04/18 04:51:33;  author: marcus;  state: Exp;  lines: +0 -1
Remove USE_GNOMENG.

v. 1.3
date: 2003/02/21 11:04:53;  author: knu;  state: Exp;  lines: +1 -0
De-pkg-comment.

v. 1.2
date: 2003/01/21 10:26:59;  author: arved;  state: Exp;  lines: +3 -3
Fix LIB_DEPENDS

Reported by:	bento

v. 1.1
date: 2003/01/19 00:35:38;  author: edwin;  state: Exp;
new port: cad/gwave

	Gwave is a waveform viewer. Its purpose is for viewing
	analog data, such as the output from Spice-like simulations.

PR:		ports/39364
Submitted by:	Duncan Barclay 
=============================================================================