The FreeBSD Ports Archive

FreeBSD audio : amp

Another mp3 player

 amp (Audio Mpeg Player) is an MPEG audio decoder which was originally started 
putting together as a side project of the MPEG hardware design project at 
FER/Zagreb - just to confirm my knowledge of the standard. It works with
both MPEG1 and MPEG2 audio streams, layer3 and for now the multichannel 
extensions defined in MPEG2 too.
 

amp history

v. 1.16
date: 2005/04/17 15:19:40;  author: novel;  state: Exp;  lines: +3 -6
- Update to 0.7.6
- Change pkg-descr to reflect the new patches changes
- Pass maintainership to submitter

PR:		79873
Submitted by:	Rodrigo Graeff 

v. 1.15
date: 2005/02/16 13:21:13;  author: vs;  state: Exp;  lines: +6 -5
Downgrade to 0.7.5-99 which is the only version still available (so bump
PORTEPOCH). Inicidentially, this is hosted on the same site as its only
consumer, audio/xmpeg3.

v. 1.14
date: 2004/03/18 17:40:08;  author: vanilla;  state: Exp;  lines: +1 -1
reset MAINTAINER bit to ports@

I have no too much time to maintain.

v. 1.13
date: 2004/02/06 13:10:44;  author: trevor;  state: Exp;  lines: +1 -0
Use PLIST_FILES (bento-tested, marcus-reviewed).

v. 1.12
date: 2004/02/04 05:18:24;  author: marcus;  state: Exp;  lines: +1 -0
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

v. 1.11
date: 2003/03/07 05:55:59;  author: ade;  state: Exp;  lines: +2 -1
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

v. 1.10
date: 2000/04/08 21:23:11;  author: mharo;  state: Exp;  lines: +3 -3
update with the new PORTNAME/PORTVERSION variables

v. 1.9
date: 1999/08/31 06:40:27;  author: mharo;  state: Exp;  lines: +2 -2
FreeBSD.ORG -> FreeBSD.org

Prompted by PR:  13476, 13477
Submitted by:  KATO Tsuguru

v. 1.8
date: 1999/08/25 04:35:16;  author: obrien;  state: Exp;  lines: +1 -1
Change Id->FreeBSD.

v. 1.7
date: 1998/11/02 15:58:14;  author: vanilla;  state: Exp;  lines: +1 -3
Unbreak this ports.

v. 1.6
date: 1998/11/02 04:55:33;  author: jseger;  state: Exp;  lines: +3 -1
Mark BROKEN:
gcc -c -O6 -ffast-math -fomit-frame-pointer  -DNO_BYTE_SWAPPING -DOS_BSD -DARCH_i386     audioIO.c
In file included from audioIO.c:11:
audioIO_Linux.c:29: parse error before `32768'
audioIO_Linux.c: In function `audioOpen':
audioIO_Linux.c:81: invalid lvalue in unary `&'
gmake: *** [audioIO.o] Error 1
*** Error code 2

v. 1.5
date: 1998/04/29 22:55:19;  author: vanilla;  state: Exp;  lines: +1 -2
Chage extract_sufx to .tar.gz, change the md5 checksum.

v. 1.4
date: 1998/04/26 08:05:24;  author: vanilla;  state: Exp;  lines: +4 -2
Change MASTER_SITE, the author's site seems dead.

v. 1.3
date: 1997/11/30 19:34:51;  author: vanilla;  state: Exp;  lines: +2 -2
Change my email address.

v. 1.2
date: 1997/09/03 08:35:30;  author: max;  state: Exp;  lines: +4 -4
Upgrade, 0.7.3 -> 0.7.6.
PR:		4457
Submitted by:	the port maintainer

v. 1.1
date: 1997/08/31 22:19:54;  author: max;  state: Exp;
branches:  1.1.1;
Initial revision

v. 1.1.1.1
date: 1997/08/31 22:19:54;  author: max;  state: Exp;  lines: +0 -0
New port, amp:

------------------------ From the README file ------------------------
amp (Audio Mpeg Player) is an MPEG audio decoder which I originally started
putting together as a side project of the MPEG hardware design project at
FER/Zagreb - just to confirm my knowledge of the standard. It works with
both MPEG1 and MPEG2 audio streams (except for the multichannel extensions
defined in MPEG2), layer3 only for now.
 End of quote 


PR:		3935
Submitted by:	Vanill I. Shu 
=============================================================================