The FreeBSD Ports Archive

Freebsd | Contact
Welcome to FreeBSD Software


FreeBSD archivers : libarchive

Library to create and read several streaming archive formats

 Libarchive is a programming library that can create and read several
different streaming archive formats, including most popular tar
variants and the POSIX cpio format. 

http://people.freebsd.org/~kientzle/libarchive/



libarchive history


v. 1.44
date: 2007/10/29 02:45:55;  author: glewis;  state: Exp;  lines: +1 -1
. Update to 2.3.5.

v. 1.43 date: 2007/10/14 17:38:36; author: glewis; state: Exp; lines: +4 -2 . Update to 2.3.4.
v. 1.42 date: 2007/10/07 20:51:46; author: glewis; state: Exp; lines: +2 -2 . Update to 2.3.3.
v. 1.41 date: 2007/09/28 04:18:50; author: glewis; state: Exp; lines: +1 -1 . Update to 2.3.2.
v. 1.40 date: 2007/09/20 16:47:32; author: glewis; state: Exp; lines: +13 -3 . Update to 2.3.1. . Optionally install bsdcpio (currently defaults to off until bsdcpio is a little more mature).
v. 1.39 date: 2007/09/08 07:04:08; author: glewis; state: Exp; lines: +1 -1 . Update to 2.2.7.
v. 1.38 date: 2007/08/13 00:29:34; author: glewis; state: Exp; lines: +1 -1 . Update to 2.2.6
v. 1.37 date: 2007/07/23 09:35:28; author: rafan; state: Exp; lines: +0 -1 - Set --mandir and --infodir in CONFIGURE_ARGS if the configure script supports them. This is determined by running ``configure --help'' in do-configure target and set the shell variable _LATE_CONFIGURE_ARGS which is then passed to CONFIGURE_ARGS. - Remove --mandir and --infodir in ports' Makefile where applicable Few ports use REINPLACE_CMD to achieve the same effect, remove them too. - Correct some manual pages location from PREFIX/man to MANPREFIX/man - Define INFO_PATH where necessary - Document that .info files are installed in a subdirectory relative to PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and subdirectory detection. PR: ports/111470 Approved by: portmgr Discussed with: stas (Mk/*), gerald (info related stuffs) Tested by: pointyhat exp run
v. 1.36 date: 2007/07/17 21:18:29; author: glewis; state: Exp; lines: +1 -1 . Update to 2.2.5.
v. 1.35 date: 2007/07/12 17:21:22; author: glewis; state: Exp; lines: +1 -2 . Update to 2.2.4.
v. 1.34 date: 2007/06/27 21:11:08; author: glewis; state: Exp; lines: +1 -0 . Bump PORTREVISION for the previous change. Suggested by: erwin
v. 1.33 date: 2007/06/27 20:04:51; author: glewis; state: Exp; lines: +1 -0 . Add new man page missed in the update. Pointed out by: pav Pointy hat to: glewis
v. 1.32 date: 2007/06/26 05:19:17; author: glewis; state: Exp; lines: +4 -2 . Update to 2.2.3.
v. 1.31 date: 2007/05/02 07:18:13; author: edwin; state: Exp; lines: +1 -10 [patch] cleanup non-supported FreeBSD versions PR: ports/111638 Submitted by: Edwin Groothuis Approved by: maintainer timeout
v. 1.30 date: 2006/11/10 06:05:51; author: glewis; state: Exp; lines: +2 -2 . Update to 1.3.1.
v. 1.29 date: 2006/06/20 22:33:47; author: glewis; state: Exp; lines: +14 -3 . Update to 1.2.53. bsdtar is now included in this port.
v. 1.28 date: 2005/11/15 19:51:39; author: glewis; state: Exp; lines: +1 -1 . Update to 1.2.37. . Add SHA256.
v. 1.27 date: 2005/10/13 17:09:00; author: glewis; state: Exp; lines: +6 -2 . Update to 1.02.036.
v. 1.26 date: 2005/09/25 18:56:00; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.034.
v. 1.25 date: 2005/09/07 15:08:04; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.032.
v. 1.24 date: 2005/09/06 16:35:31; author: glewis; state: Exp; lines: +1 -7 . Allow installation on recent versions of FreeBSD. Although this is in the base system, the version in this port may contain newer features which are not in the base system version (depending on how old your FreeBSD version is).
v. 1.23 date: 2005/09/06 02:01:10; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.031.
v. 1.22 date: 2005/08/28 19:58:30; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.030.
v. 1.21 date: 2005/06/15 19:37:58; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.027.
v. 1.20 date: 2005/06/06 19:54:52; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.026.
v. 1.19 date: 2005/05/02 04:01:37; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.023.
v. 1.18 date: 2005/04/18 14:02:53; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.019.
v. 1.17 date: 2005/04/12 16:37:38; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.017.
v. 1.16 date: 2005/03/16 16:19:35; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.016.
v. 1.15 date: 2005/03/15 17:35:38; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.015.
v. 1.14 date: 2005/03/14 17:23:59; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.014.
v. 1.13 date: 2005/02/27 06:51:21; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.010.
v. 1.12 date: 2005/02/23 20:49:18; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.009.
v. 1.11 date: 2005/02/16 19:39:14; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.006.
v. 1.10 date: 2005/02/01 16:16:32; author: glewis; state: Exp; lines: +1 -1 . Update to 1.02.002.
v. 1.9 date: 2004/12/29 06:37:28; author: glewis; state: Exp; lines: +1 -1 . Update to 1.01.022.
v. 1.8 date: 2004/11/15 16:38:14; author: glewis; state: Exp; lines: +1 -2 . Update to 1.01.020.
v. 1.7 date: 2004/11/08 15:49:30; author: glewis; state: Exp; lines: +1 -0 . The distfile has changed to include some fixes for the handling of write errors. Chase this and bump PORTREVISION for the fixes.
v. 1.6 date: 2004/10/12 05:53:09; author: glewis; state: Exp; lines: +1 -1 . Update to 1.01.015.
v. 1.5 date: 2004/08/23 16:37:49; author: glewis; state: Exp; lines: +7 -112 . Update to 1.01.013. . Fix a whitespace bogon. [2] Submitted by: portlint [2]
v. 1.4 date: 2004/07/15 16:09:15; author: glewis; state: Exp; lines: +22 -5 . Update to 2004.07.14.
v. 1.3 date: 2004/06/16 15:20:49; author: glewis; state: Exp; lines: +23 -8 . Update to 2004.06.07.
v. 1.2 date: 2004/04/12 20:25:50; author: glewis; state: Exp; lines: +4 -5 . Update to the 2004-04-08 snapshot.
v. 1.1 date: 2004/03/24 17:20:48; author: glewis; state: Exp; Add a port of Tim Kientzle's libarchive: Libarchive is a programming library that can create and read several different streaming archive formats, including most popular tar variants and the POSIX cpio format. WWW: http://people.freebsd.org/~kientzle/libarchive/ This code is present in -CURRENT but Tim currently has no intention of MFC'ing it. The port will allow 4.x users to benefit from Tim's current work and the tools he is building on top of it (bsdtar, libpkg). Not objected to by: kientzle =============================================================================



Main menu

FreeBSD

Program categories

Freebsd accessibility
Freebsd archivers
Freebsd astro
Freebsd audio
Freebsd benchmarks
Freebsd biology
Freebsd cad
Freebsd chinese
Freebsd comms
Freebsd converters
Freebsd databases
Freebsd deskutils
Freebsd devel
Freebsd dns
Freebsd editors
Freebsd emulators
Freebsd finance
Freebsd french
Freebsd ftp
Freebsd games
Freebsd german
Freebsd graphics
Freebsd hebrew
Freebsd hungarian
Freebsd irc
Freebsd japanese
Freebsd java
Freebsd korean
Freebsd lang
Freebsd mail
Freebsd math
Freebsd mbone
Freebsd misc
Freebsd multimedia
Freebsd net
Freebsd net-im
Freebsd net-mgmt
Freebsd net-p2p
Freebsd news
Freebsd palm
Freebsd polish
Freebsd ports-mgmt
Freebsd portuguese
Freebsd print
Freebsd russian
Freebsd science
Freebsd security
Freebsd shells
Freebsd sysutils
Freebsd textproc
Freebsd ukrainian
Freebsd vietnamese
Freebsd www
Freebsd x11
Freebsd x11-clocks
Freebsd x11-drivers
Freebsd x11-fm
Freebsd x11-fonts
Freebsd x11-servers
Freebsd x11-themes
Freebsd x11-toolkits
Freebsd x11-wm